Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Providence Village, TX
Flint Chimney Sweep handles chimney cleaning, inspection, and repair across Providence Village, TX with written pricing before any work begins. Homes here sit on flat, clay-heavy North Texas soil, and the fireplaces that came standard in many 2000s-era builds now have 15 to 25 years of seasonal use behind them. That means creosote buildup, cracked flue tiles, and rusted dampers show up more often than homeowners expect. Call (830) 251-4560 and we’ll give you a straight answer about what your chimney needs.
Why Providence Village Homes Are Different
Providence Village sits in Denton County, just east of the Lake Lewisville area, where winters are short but cold enough to run a fireplace for solid stretches between November and February. Homes here were mostly built in the 2000s, many with prefabricated fireplace units and factory-built chimneys rather than traditional masonry. Those systems have different clearances, different liner materials, and different wear points than an old brick chimney, and sweeping one takes tools and training specific to the manufacturer. We see a lot of homes where the original chimney cap has rusted through after years of exposure to North Texas thunderstorms, hail, and summer heat that bakes rooftop components past 140 degrees. Loose mortar and spalling brick are less common here than in older cities like Fort Worth, but the heat-and-rain cycle still causes flashing failures around the roofline. Working around Providence Village’s HOA-managed streets means crews arrive on schedule, keep the work area tight, and leave the driveway clean, because nobody wants a note from the association the next morning.
Our Main Providence Village Services
The two services Providence Village homeowners call about most are chimney sweeps and chimney inspections, with repair work typically following what the camera shows. Here’s what each involves here.
Chimney Sweep in Providence Village
A standard sweep in Providence Village removes the creosote and soot buildup from the flue walls, smoke shelf, damper, and firebox. In prefabricated systems common to this area, we hand-sweep with poly or wire brushes matched to the flue dimensions rather than running equipment built for masonry tile. The work usually takes 60 to 90 minutes, and before we finish, every job gets the visual check that catches cracked panels and missing screws in factory-built systems. Full details on preparation, what we cover with drop cloths, and cleanup are on our Chimney Sweep in Providence Village page.

Chimney Inspection in Providence Village
We run a camera through the flue from top to bottom because that’s the only way to see the condition of the interior liner, especially in a 20-year-old factory-built chimney where panels can crack behind the chase cover. A Providence Village inspection gives you either a clean bill or a clear list of what needs attention, with the images to confirm it. If a furnace or gas water heater vents through the same chase, we check that path too. See Chimney Inspection in Providence Village for the levels we offer and what the camera report includes.

Chimney Repair in Providence Village
When the camera shows a problem, the fix gets documented the same day. Common Providence Village repairs include replacing rusted chase covers, swapping out cracked flue panels, replacing failed dampers, and tuckpointing the brick on the few masonry chimneys in the area. Every repair comes with the 365-Day Done Right Promise in writing, covering the work for one full year. If a covered repair fails inside that window, we return and fix it at no charge. What we can repair, what needs replacement, and the materials we specify for each are on the Chimney Repair in Providence Village page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Providence Village
We stock and install parts from Famco, Copperfield, and DuraFlex because those manufacturers build components sized for the factory-built systems common in Providence Village. We can usually complete a liner, damper, or cap replacement in one visit without a parts order delay. See our brands for details on what we carry.
Pricing for Chimney Company in Providence Village, TX
| Service | Typical range in Providence Village |
|---|---|
| Standard chimney sweep (open fireplace) | $189 – $249 |
| Chimney sweep with heavy creosote buildup | $269 – $349 |
| Level 1 chimney inspection | $149 – $199 |
| Level 2 chimney inspection (camera scan) | $249 – $349 |
| Chase cover replacement | $349 – $549 |
| Damper replacement | $299 – $449 |
| Flue panel repair (per panel) | $189 – $289 |
| Chimney cap replacement | $189 – $329 |
| Tuckpointing (per square foot) | $12 – $22 |
Heavy creosote, animal blockages, or a chimney that hasn’t been touched in a decade pushes a Providence Village job toward the top of these ranges. If the flue is factory-built and original to the home, there’s also a chance the camera shows panel cracks that add repair work the same day. You’ll see the price in writing before we touch a single component, so the invoice never surprises you.
Neighborhoods We Serve in Providence Village
Our crews run routes through the entire Providence Village area, including the original sections around the town center and the newer developments east toward US 380.
- Providence Landing
- The Highlands of Providence
- Dunes of Providence
- Providence Estates
- Village at Providence
We schedule Providence Village jobs in a daily window, and our crew typically arrives at the time we give you. HOA streets here are simple to access, so the main variable is weather, not navigation.
Service Area – Cities Near Providence Village
Flint Chimney Sweep covers Providence Village and the surrounding North Texas area, with crews scheduled from our Dallas-Fort Worth office. Homeowners in Fort Worth, TX and Dallas, GA call us for the same written pricing and guarantee. We also serve Houston, TX and San Antonio, FL for chimney cleaning and repair.
Serving Providence Village, TX - Our Local Coverage Area
We’re based in the Providence Village area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Providence Village
Most Providence Village sweeps and inspections are scheduled within a few business days, and we arrive in the window we give you. There’s no per-neighborhood delay because our routes run through the entire town several times a week. Call (830) 251-4560 and we’ll tell you the next available slot.
Most chimney sweeps and inspections don’t require HOA approval because they don’t change the home’s exterior. Repairs like chase covers and caps are visible from the street in some neighborhoods, so if your association has strict exterior rules, we can match the existing finish rather than installing a mismatched unit.
Yes. We cover the entire town, from the original sections closest to Providence Boulevard to the newest streets east toward US 380. Dispatch runs out of our Dallas-Fort Worth office, but the crew that shows up at your door is the crew that does the work. Call (830) 251-4560 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Providence Village Customers Say
"Smoky fireplace for years. Turned out the cap was clogged. Swapped it and the smoke is gone."
- Brandon T."Rebuilt the crown on our chimney where water had been getting in. Neat masonry and a fair price."
- Eddie J."Very respectful, wore boot covers, laid drop cloths. Left no soot."
- Jan S.





Before
After
Before
After
Before
After