Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Bellevue, WA
Flint Chimney Sweep is the chimney company Bellevue homeowners call when they want the job scoped, priced, and guaranteed in writing. Bellevue’s housing stock runs from 1960s split-levels in Lake Hills to newer builds in Somerset and Bridle Trails, and the chimneys vary just as much: wood-burning masonry, factory-built metal flues, and gas inserts that still need annual inspection. Rain, fir needles, and the Eastside’s damp shoulder seasons all put real wear on a chimney. Call (830) 251-4560 and we’ll give you a straight answer before anything goes on the calendar.
Why Bellevue Homes Are Different
Bellevue sits between Lake Washington and Lake Sammamish, and the moisture that rolls in off both bodies of water does predictable things to masonry and metal flues. Brick and mortar absorb water through the winter, then dry unevenly when the temperature swings, which is why spalling brick faces and cracked crowns show up more often in the first hillside neighborhoods than they do further inland. Chimneys that vent gas or wood stoves in older homes around Woodridge and Enatai often have terra cotta liners that predate current sizing standards. The point isn’t that Bellevue chimneys fail more, it’s that they fail differently, and the fix usually starts with knowing exactly which chimney type you have. Hank Delano and the crews carry camera inspection gear on every call because in this area, guessing is the expensive way to do it. Permits for structural repairs run through the city, and HOAs in planned communities around Lakemont and Newport Hills sometimes require approval before visible exterior work. A sweep or inspection almost never does, and we’ll tell you in writing if yours does.
Our Main Bellevue Services
Three services cover nearly every call we run in Bellevue. Each has its own page with pricing and local detail.
Chimney Sweep in Bellevue
A chimney sweep in Bellevue means removing the creosote and debris that build up inside the flue so smoke drafts properly and fire risk stays low. Many Bellevue homes burn Douglas fir, which coats a flue with a glaze that hardens fast in a cool, wet climate like ours. We run professional brushes and a HEPA-filtered vacuum setup, and we put down drop cloths before anything starts. The work typically finishes the same day. If you want the full scope, read the dedicated page: Chimney Sweep in Bellevue.
Chimney Inspection in Bellevue
An inspection in Bellevue tells you whether the flue is safe to burn and what’s wearing out inside it. We use a camera pushed through the flue so you see the same footage we see, especially in 1970s and 1980s homes around Crossroads and Lake Hills where metal flues have been in service a long time. No recommendation gets made until that footage is on the screen. Learn how we grade what we find: Chimney Inspection in Bellevue.
Chimney Repair in Bellevue
Repair work in Bellevue covers cracked crowns, damaged flue liners, bad flashing, and masonry that has started pulling away from the house. We carry materials like HeatShield and Gelco on the truck, and every repair gets a written 365-Day Done Right Promise: if a covered repair fails within one full year, we return at no charge. See the full repair scope here: Chimney Repair in Bellevue.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Bellevue
We work on most major chimney brands and carry durable replacement components from HeatShield, Gelco, and Olympia Chimney. Parts for common repairs are stocked on the truck, so most Bellevue jobs don’t wait on a second visit. See the full list on our brands page.
Pricing for Chimney Company in Bellevue, WA
These are the numbers our Bellevue customers hear most often. A written price comes before any work starts, every time.
| Service | Typical range in Bellevue |
|---|---|
| Standard chimney sweep | $180 – $340 |
| Level 1 inspection | $150 – $250 |
| Level 2 camera inspection | $300 – $500 |
| Chimney cap replacement | $175 – $400 |
| Flue relining | $2,800 – $6,500 |
| Chimney crown repair | $350 – $900 |
| Chimney flashing repair | $300 – $700 |
| Masonry tuckpointing | $500 – $1,500 |
Prices in Bellevue push toward the higher end when there’s scaffolding involved on hillside homes around Somerset or Lakemont, and when a flue needs more than a standard relining kit. Whatever the number turns out to be, you’ll see it on a written estimate before we touch a single tool.
Neighborhoods We Serve in Bellevue
We run chimney jobs across Bellevue every week. Crews are on the road daily throughout the Eastside, and most calls are scheduled within the same week.
- Lake Hills
- Crossroads
- Somerset
- Enatai
- Lakemont
- Newport Hills
Service Area – Cities Near Bellevue
Beyond Bellevue, we regularly work in Medina, WA and Mercer Island, WA across the water, plus Kirkland, WA and Redmond, WA to the north and east. Dispatch and scheduling are coordinated from the brand’s Seattle office.
Serving Bellevue, WA - Our Local Coverage Area
We’re based in the Bellevue area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Bellevue
Most Bellevue appointments are booked within the same week, and we show up inside the window we give you. A live person answers the phone 24/7, so you’ll get a real schedule, not a callback form.
Regular sweeps and inspections almost never do. Repairs that change the exterior appearance, like a new cap or visible masonry work, can require HOA review in communities around Lakemont and Newport Hills. We’ll flag it before work starts.
Most interior repair work, including flue relining, does not require a city permit. Structural masonry rebuilds sometimes do. We’ll tell you in writing if your job falls into that category.
Yes. Many Bellevue homeowners call because they smell smoke or see staining near the ceiling, and they don’t know if it’s the chimney, flashing, or both. A camera inspection answers it. Call (830) 251-4560 and we’ll schedule the visit.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bellevue Customers Say
"Level 2 inspection before we bought the house. Report was detailed and saved us from a bad surprise."
- Archie M."Full inspection with a camera. Found a cracked flue tile and quoted the repair clearly. Did not push."
- Lydia C."Great sweep. Only thing, the appointment window ran long and I waited. Cleanup was spotless though."
- Marge P.