Chimney Inspection in Arlington - Flat-Price Sweep, Findings in Writing

Fast, Reliable Chimney Inspection Across Arlington

Chimney inspection in Arlington runs $89 – $189 for a standard Level 1 look, and $189 – $389 when we put a camera up the flue for a Level 2. That’s the number you’ll approve before we ever set foot on your roof, because we write the price down before the truck rolls. We work across Arlington, TX, from the brick ranches off Park Row to the two-story builds in Southeast Arlington and the timber-framed homes near Lake Arlington. Our crews know the difference between a chimney that needs a sweep this fall and one that can wait another year. Call (830) 251-4560 and we’ll give you the straight answer.

Call (830) 251-4560

Why Flint Chimney Sweep Is Arlington’s Preferred Chimney Inspection Company

Arlington homeowners call us because we don’t play games with the invoice. Every inspection gets a written price before any work starts, and that number doesn’t move. If we quote $269 for a Level 2 with camera, your invoice says $269. Not $340 with a “liner recommendation” bolted on after the fact.

We’ve been part of the Arlington service area since our founding in 2002 under the Garrison Partners family. Technicians that roll up to your door are background-checked, uniformed, and trained to show you exactly what the camera sees before they recommend anything. The Chimney Inspection team runs under The Garrison Standard: written scope, written price, and a 365-Day Done Right Promise on every repair we touch. If a covered repair fails within a year, we return at no charge. That’s the guarantee, in writing, on every job.

Hank Delano, who leads Flint Chimney Sweep, put it plainly: “The job isn’t done because we say so. It’s done when the photo report proves it and the customer signs off.” That’s the standard.

Chimney Fire in Arlington

Chimney Fire in Arlington is what we call it when a homeowner has been burning wood for years without an inspection and the creosote has built to the point the flue is a loaded fire risk. In Arlington’s older brick chimneys, built in the 1970s and 1980s, first-degree creosote flakes off the smoke chamber and second-degree creosote hardens into a tar-like coating on the flue walls. That’s a fire waiting for the right spark, and North Texas dry winters make the risk worse.

How We Inspect for Fire Risk Before It Becomes a Problem

A chimney fire inspection in Arlington means we run a camera up the flue and measure the creosote level against NFPA 211 standards. First-degree is a brush job. Second-degree is a rotary clean. Third-degree creosote, the glossy tar that can’t be brushed out, needs a different method entirely and we’ll tell you that up front. Hank Delano’s crews have pulled third-degree glaze from flues in West Arlington that hadn’t seen an inspection since the Reagan administration.

What a Sweep and Camera Check Costs in Arlington

A standard chimney fire inspection paired with a sweep runs $189 – $349 depending on flue height and creosote level. The camera work is included in that range. You’ll approve the written price before we climb, and we show you the photo report after.

Level 2 Chimney Inspection in Arlington

Level 2 Chimney Inspection in Arlington means the full camera treatment: we video-scan the flue liner from top to bottom, checking for cracks, spalling, gaps in the clay tile, and creosote hiding behind the smoke shelf. Arlington homes need this more than most because our clay soil moves, and movement cracks chimneys from the crown down. When a customer is buying or selling a home here, a Level 2 is standard before closing.

When Arlington Homeowners Need a Level 2 Inspection

You need a Level 2 in Arlington if you’re buying a house, if the home has changed hands since the last inspection, if you’ve had a chimney fire, or if the chimney took hail damage in a North Texas storm. We see crown cracks on Arlington chimneys that haven’t been burned in years, because the clay soil under the foundation shifts with our wet-dry cycles. Water gets behind the liner and starts eating it from the outside in.

The Damage Hail and Soil Movement Cause

Arlington sits in the hail corridor that runs through Tarrant County. A 2016 hailstorm can dent a chimney cap, crack a crown, and loosen flashing on the south-facing slope of a roof. Homeowners don’t notice until a Level 2 camera inspection shows water staining behind the flue liner. In the Deerfield neighborhood off Pioneer Parkway, our tech pulled a Level 2 on a 1990s brick fireplace and found first-degree creosote flaking off the smoke chamber plus a hairline crown crack letting water wick into the firebox. We shot the flue liner with the inspection camera, showed the homeowner the photo report on the spot, and quoted a crown seal and cap replacement at the price we’d agreed before booking. The firebox itself was sound, so we told them the damper and firebox could wait until fall.

Trusted Brands We Service in Arlington

When repairs come out of an inspection, we install professional-grade materials and tell you the brand name before we order. For Arlington chimneys, that often means a DuraFlex liner when the flue is compromised, a HeatShield resurfacing when the clay tiles are spalling, or a Copperfield crown sealer when the clay soil movement has cracked the top. We stock common parts locally so turnaround on repairs in Arlington, TX doesn’t drag for two weeks. If your inspection turns up a problem, we show you the photo, name the material, and quote the fix in writing that same day.

Common Chimney Inspection Problems We See in Arlington Homes

• Expanding clay soil cracking the chimney crown. Arlington’s North Texas clay expands when it’s wet and contracts during our dry spells. That movement transfers up through the brickwork, and the crown hairline cracks first. Water gets in, freezes in a North Texas cold snap, and widens the crack.
• Hail damage to caps and flashing. Arlington sits in a high-wind/hail corridor, so roof flashing and chimney caps take hits even when nobody remembers the storm. A loose cap lets rain run behind the crown and into the flue liner.
• First-degree creosote flaking off the smoke chamber in 1990s brick builds. The tight older flues in Southeast Arlington and near Pioneer Parkway hold creosote that a visual-only inspection will miss. Camera work finds it in minutes.
• Water staining behind the flue liner from crown cracks that never got caught. A chimney that looks fine from the yard can be losing its liner from the outside in. The only way to see it is with a Level 2 camera.

Pricing for Chimney Inspection in Arlington, TX

We Also Serve Cities Near Arlington

Flint Chimney Sweep works throughout the Arlington area, including Mansfield, Kennedale, Burleson, and Cedar Hill. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve each of those communities locally. If you’re outside Arlington proper, we’ll still bring the same written price and camera inspection to your door.

Level 1 vs Level 2 Inspection for Arlington Homes

Most Arlington homeowners don’t need a Level 2 every year. A Level 1 covers a visual check of the firebox, damper, flue, and chimney exterior with a flashlight and trained eye. It’s $89 – $189. A Level 2 adds the camera scan and is the standard when something has changed: new house, new chimney, storm damage, or a chimney fire. The question homeowners should ask isn’t “which is better” but “what changed since the last look.” If you’re not sure, call and Hank Delano’s team will tell you straight which one fits.

FAQs About Chimney Inspection in Arlington