Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Inspection Across Corinth
A chimney inspection in Corinth typically runs $189 to $349 depending on the level, and a Level 2 camera inspection with a written photo report is the option we recommend for most homes here. That’s the direct answer. Corinth sits in a hail-and-wind corridor along I-35E, so what shows up on our camera feeds often has as much to do with storm damage as it does with soot and creosote. If you’re off Post Oak Drive, near Lake Sharon, or tucked into the Shady Shores side of town, we know the housing stock and we know what to look for. Call (830) 251-4560 and we’ll give you a written price before any work starts.
Why Flint Chimney Sweep Is Corinth’s Preferred Chimney Inspection Company
We show up on time, in uniform, with a background-checked technician. That’s the baseline. What separates us in Corinth is that every inspection ends with a written report that includes camera photos, not just a verbal “looks fine to me.” We are part of the Garrison Partners family, which has operated since 2002 under The Garrison Standard: a documented price before work, a documented scope, and a written guarantee on any repair. The Garrison Code is the same at every Garrison Partners location, and that consistency matters when you’re hiring someone to tell you the truth about your chimney.
Corinth homeowners call us after getting burned by no-show crews or moving prices at the door. We don’t do either. The price we write down before the first tool comes off the truck is the price on the invoice. And if a repair we make fails within a full year, we return free of charge under the 365-Day Done Right Promise. That’s not a slogan. It’s written down.
Level 2 Chimney Inspection in Corinth
Level 2 Chimney Inspection in Corinth is the service we recommend most often, and it involves running a camera down the flue to document every inch from the firebox to the cap. A Level 2 inspection typically runs $289 to $349 in Corinth, depending on flue height and roof access. You need one when you buy a home, after any hailstorm or chimney fire, when you change fuel type, or when you notice a smoke smell that won’t go away. Corinth’s position along the I-35E storm corridor means crown and cap damage is common here, and that damage is exactly what a Level 2 inspection is built to catch.
Camera Scope and Photo Report
The camera sees what a flashlight can’t. Cracked flue tiles, separated mortar joints, third-degree creosote glaze hiding behind a bend. Every Level 2 inspection we perform in Corinth includes a photo report you can hold in your hand, so you’re not taking our word for anything. If we flag a problem, you’ll see it in the image.
Real Estate Transactions
If you’re buying or selling a home in Corinth, the lender or buyer’s agent often asks for a Level 2 inspection. We handle those regularly. The report we produce is detailed enough to satisfy the transaction and clear enough for a first-time buyer to understand. We schedule around your closing timeline and email the report same day when the job is complete.
Chimney Leak in Corinth
Chimney Leak in Corinth is one of the most common inspection findings we see, and it usually isn’t a flashing failure at first glance. Our camera reports on homes off Post Oak Drive and along FM 2181 routinely show water staining on the flue wall, rusted dampers, and spalling crown concrete. Hail from spring storms up I-35E cracks the crown and bends the cap, and water follows. A leak inspection in Corinth typically runs $189 to $289 when we combine it with a Level 1 or Level 2 scope, and we’ll tell you whether the fix is a new cap, a crown reseal, or something more involved.
Cap and Crown Damage
Corinth gets hit with real hail. Bent caps, chipped crown wash, weep holes that no longer drain. These are storm-related failures, not fire-related ones, which is why a generic “sweep and gone” visit misses them. When we scope a flue here, we photograph the cap and crown as part of the inspection, because in this corridor that’s where the action is.
Flashing and Water Entry
Flashing pulls away from the roofline over time, especially with the wind loads common in Denton County. If water is entering at the roofline, it reads as a draft problem or a musty smell upstairs. Our leak inspection traces the water path and documents it, so you know whether the repair is chimney work, roof work, or both.
Trusted Brands We Service in Corinth
We work with professional-grade chimney products from Olympia Chimney, Famco, and Copperfield, and we stock common replacement parts locally for Corinth customers so a repair doesn’t stall waiting on a shipment from out of state. If your chimney has an Olympia cap, a Famco damper, or Copperfield flashing, we know those systems and we service them directly. We specify materials by job, not by margin, and the brand name goes in your written report so you can verify what was installed. When a liner is needed, we work with DuraFlex and HeatShield, and we’ll show you why that product fits your flue before we install it.
Common Chimney Inspection Problems We See in Corinth Homes
- Hail-bent caps and spalling crowns. Corinth sits in the I-35E hail corridor, so cap damage is a recurring finding. Bent metal lets water straight down the flue, and spalled crown concrete widens the entry point every season.
- Cracked flue liner tiles in the smoke chamber. Many Corinth homes are 20 to 30 years old. Clay liner tiles crack from heat cycling, and the gap lets smoke and heat reach the surrounding masonry. This is the exact failure a camera scope catches, and it’s missed entirely by a brush-only visit.
- Third-degree creosote glaze. More common in homes that burn construction lumber, pine, or unseasoned wood. Glaze is hard, shiny, and fuel-rich. Brushing it doesn’t remove it. We flag it for HeatShield or Gelco resurfacing rather than pretending a sweep fixed it.
- Water intrusion reading as a draft problem. Homeowners call about smokey rooms when the real issue is a wet flue from a failed cap or crown. Once the water entry is sealed, the draft problem usually disappears. We see this pattern repeatedly in Corinth.
Pricing for Chimney Inspection in Corinth, TX
A Level 1 inspection in Corinth runs $189 to $249 and covers the accessible parts of the chimney without a camera scope. A Level 2 inspection runs $289 to $349 and includes the full camera scan with a photo report. If we’re also chasing a leak, the combined inspection ranges from $189 to $289 depending on what level of scope the situation calls for. Flue height and roof pitch shift the number within those ranges. Any repair we recommend after the inspection gets its own written price before we start, so you will never approve a repair after seeing a surprise invoice. Call (830) 251-4560 for a free estimate, and we’ll confirm the exact price for your chimney before we book the visit.
We Also Serve Cities Near Corinth
Our Chimney Inspection crews serve Corinth and the surrounding North Texas region, including Dallas, Fort Worth, Houston, and San Antonio. If you’re located in one of those cities, the same written-pricing standard and the same camera-documented Chimney Inspection in Corinth process applies wherever we work.
Serving Corinth, TX - Our Local Coverage Area
We’re based in the Corinth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Corinth
Once a year, even with light use, because hail and wind in Corinth damage caps and crowns regardless of how often you burn. An annual Level 1 inspection is adequate for light-use fireplaces, but we recommend a Level 2 camera scope after any major hailstorm or if you notice new water stains near the chimney. Call (830) 251-4560 to schedule, and we’ll give you a written price before the visit.
A Level 1 inspection checks the accessible parts of the chimney and runs $189 to $249 in Corinth. A Level 2 inspection adds a camera scope through the entire flue, including the smoke chamber, and runs $289 to $349. The camera is what finds cracked liner tiles, hidden creosote glaze, and storm damage you can’t see from the hearth. For Corinth’s hail corridor, Level 2 is the inspection that catches the problems this area actually produces.
Yes. Every inspection in Corinth gets a written price before any work starts, and the final invoice matches the approved number. No callout fee games, no moving the number at the door. The price we quote is the price you pay. Call (830) 251-4560 and we’ll confirm your exact inspection price over the phone.
Third-degree creosote looks like a hard, shiny black glaze that forms when fires burn hot and then cool, often from pine or unseasoned wood. It is a fuel source sitting inside your flue, and brushing alone does not remove it. In Corinth we flag it for HeatShield or Gelco resurfacing rather than letting a homeowner think a brushing solved the fire risk. If you’ve seen shiny black buildup above your damper, call (830) 251-4560 for an inspection.
Yes. We service and install Olympia Chimney, Famco, and Copperfield components, and we work with DuraFlex and HeatShield for liner and resurfacing work. If your Corinth home has one of these brands, we know the system and we stock common parts locally. The brand name goes in your report so you can verify the work yourself.
Written by Hank Delano, Owner at Flint Chimney Sweep, part of the Garrison Partners family serving Corinth and the greater North Texas region since 2002.