Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Malden
A chimney inspection in Malden typically costs $149 to $389 depending on the level, and most Level 1 and Level 2 inspections take our techs about an hour on site. That number is set in writing before we arrive. You’ll know exactly what you’re paying before a single tool comes off the truck, no exceptions. If you live in Malden and haven’t had eyes on your flue in the past two years, call (830) 251-4560 to book an inspection at a flat price you approve upfront.
We dispatch directly to every Malden neighborhood, from the triple-deckers near Malden Center to the colonials along Salem Street and the rentals clustered around Maplewood Square. Our techs know what to expect in Malden chimneys because we inspect them week in and week out, not once a season.
Why Flint Chimney Sweep Is Malden’s Preferred Chimney Inspection Company
We run by a documented process that Malden homeowners have come to rely on. Hank Delano, who heads our operation, insists that every inspection starts with the same thing: a written price handed to you before work begins. That price covers the inspection, the camera work if needed, and a photo report you keep. If a repair comes out of that inspection, it carries a full-year written guarantee. If a covered repair fails within that year, we return at no charge. That’s the 365-Day Done Right Promise, and it’s printed on every repair document.
Our techs arrive in uniform, background-checked, and inside the window we gave you. The phone line at (830) 251-4560 is answered by a live person around the clock. No phone trees, no “we’ll call you back sometime next week.” That matters when you’re standing in a Malden living room wondering whether a cracked flue tile is urgent or can wait.
We’ve been part of the Garrison Partners family since 2002, and every one of our crews operates under The Garrison Standard: documented price, documented scope, documented follow-through. Malden homeowners appreciate that because this city has too many chimneys from before 1930 for guesswork to be acceptable.
Chimney Flue Inspection in Malden
A chimney flue inspection in Malden is what catches the problems you can’t see from the driveway. The flue is the interior passage that carries smoke and combustion gases up and out of the house. In Malden’s older housing stock, especially homes built before 1930 near Malden Center and Maplewood, flues were often constructed with soft brick and mortar that erodes over decades of heating and cooling. Erosion narrows the flue, creates gaps, and lets heat reach combustible materials. A proper flue inspection uses a camera pushed up the full length of the passage to document exactly what’s inside.
Camera Documentation
We run a camera through the flue and record everything. You get a photo report showing the condition of the flue tiles, mortar joints, and any blockages. Nothing gets recommended without visual evidence you can look at yourself. That’s how we avoid telling a Malden homeowner they need a liner replacement they can’t verify.
The Written Report
After the inspection you get the photos and a written summary: what condition the flue is in, what needs attention, and what can wait. If a repair is genuinely needed, we quote it in writing with material brands named, typically DuraFlex or HeatShield depending on the job. You decide from evidence, not from pressure.
Chimney Fire in Malden
A chimney fire in Malden is almost always what happens when creosote and soot build up along the flue walls and ignite. Creosote is the tar-like condensation left behind by burning wood, and it accumulates fastest in flues that haven’t been swept in a few seasons. In Malden’s triple-deckers and older singles, many flues have not been relined since the house was built, and the combination of old liners and heavy creosote is the classic setup. A chimney fire can crack flue tiles, warp metal components, and in the worst cases spread heat into the framing around the chimney.
What Inspection Catches Before a Fire Starts
A camera inspection finds the creosote glaze and the structural weak points before they combine into a fire. Third-degree creosote, which looks like a shiny black glaze, is the dangerous form, and it doesn’t brush out with a standard sweep. The camera shows it clearly, and the report documents where it sits so we can treat it correctly.
Risk After the Fire
If you’ve had a chimney fire, even a small one, the flue liner may be compromised. Heat from a chimney fire often cracks clay tiles or separates the liner from the surrounding masonry. That’s when a full inspection is critical, because fire after a damaged liner is the scenario no Malden homeowner should face. We inspect and document, then quote repairs with copper or steel components from Famco or Copperfield where specified.
Trusted Brands We Service in Malden
We inspect and service chimneys built with materials from manufacturers we trust and whose components we keep in local supply for Malden customers. That includes Famco caps and dampers, Copperfield liners, DuraFlex stainless relining systems, and HeatShield resurfacing material. When an inspection turns up a cracked clay tile in a Malden chimney, we can often specify HeatShield rather than a full reline, which changes the cost picture significantly. You’ll see the brand name on your quote, not a generic “chimney liner,” and that means you can verify what you’re paying for by looking up the product yourself.
Common Chimney Inspection Problems We See in Malden Homes
- Soft mortar joints behind the firebox. Malden homes built before 1930 often have chimneys laid with lime-based mortar that spalls and crumbles over time. It looks fine from the rooftop, but a camera reveals gaps where heat can leak.
- Third-degree creosote in the smoke chamber. We see this most often in Malden houses where wood stoves or fireplaces get used heavily and swept rarely. It sits above the damper where a basic visual check from the firebox misses it entirely.
- Crown cracks from freeze-thaw cycles. Malden’s New England winters put real strain on chimney crowns. Water gets into those hairline cracks, freezes, and widens them. That water then works its way down into the flue and the masonry, accelerating deterioration.
- Damaged flashing where the roof meets the chimney. Older Malden homes often still have original flashing that has pulled away from the brick or corroded through. A camera inspection of the flue is the part most homeowners think of, but we also document what’s happening at the roofline because that’s where water intrusion starts.
Pricing for Chimney Inspection in Malden, MA
A Level 1 visual chimney inspection in Malden runs $149 to $189. That’s appropriate when you’ve been using the same fireplace on the same schedule and have a clean service history. A Level 2 camera inspection, which we recommend for Malden homes built before 1930 and after any chimney fire, runs $289 to $389. That includes the full camera pass, a photo report, and a written summary of findings. A Level 3 inspection is rare, runs higher, and is used when a structural defect needs to be examined by opening a portion of the chimney. Every price is delivered in writing before we start. Call (830) 251-4560 for a free estimate and a flat price on the inspection level that fits your house.
We Also Serve Cities Near Malden
Our techs regularly work just over the line in Malden, and we cover the surrounding cities too: Everett, Melrose, Medford, and Chelsea. If you’re in one of those communities and the chimney on your prewar house hasn’t been inspected in years, the same written pricing and camera report applies. Call us at (830) 251-4560 to schedule.
Serving Malden, MA - Our Local Coverage Area
We’re based in the Malden area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Malden
Once a year if you burn wood, regardless of how often. Even a fireplace used ten times between November and March builds creosote, and in Malden chimneys with old flue liners, a year is enough time for a problem to develop. If you don’t burn and the chimney is only used as an exhaust for a boiler or water heater, every two to three years is typically adequate. Call (830) 251-4560 and we’ll help you figure out the right interval for your setup.
A Level 1 is a visual check of the accessible parts, typically $149 to $189. A Level 2 adds a full camera scan of the flue, which is what Malden homes built before 1930 should get, and runs $289 to $389. A Level 3 is for structural concerns and involves opening a section of the chimney to examine defects, priced by scope. Most Malden homeowners need a Level 2. Our Chimney Inspection team can walk you through which level matches your house, and the price is set in writing before we begin.
Yes. Third-degree creosote is a hardened glaze that standard brushing won’t remove. It requires chemical treatment or mechanical methods specific to the thickness and location. We document where it sits with the camera, apply the correct treatment, and then re-inspect to confirm the flue surface is clear. If you’re seeing a shiny black coating in your firebox or you smell tar after burning, call (830) 251-4560 to get it looked at before the next fire.
Yes, as part of the flue and damper condition check. A flue that is partially blocked or has a deteriorated liner can send carbon monoxide back into the house instead of up and out. In Malden’s older homes, where flue liners are often original, this is a serious concern. Our inspection notes any condition that could cause backdrafting or gas leakage, and we document it in the photo report. If there’s a blockage, a cracked liner, or a disconnected appliance flue, you’ll see it in the pictures.
We don’t promise same-day dispatch. We schedule inspections deliberately, because a camera pass through a 1930s flue in a Malden triple-decker isn’t something to rush. What you will get is a firm window and a tech who arrives on time. Booking ahead is straightforward, especially before burning season, and the summer and early fall months are when availability is best. Call (830) 251-4560 to get on the schedule.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Malden since 2002.





Before
After
Before
After
Before
After