Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Inspection Across Pacific
A chimney inspection in Pacific, WA typically costs between $189 and $349 depending on the level of inspection, and most inspections take 45 to 90 minutes on site. We serve the entire Pacific area, including the older neighborhoods near 3rd Avenue SW and along Pacific Avenue, with crews dispatched from our Seattle office when you call (830) 251-4560. If you live in a mill-era house near the Green River, you need an inspection that goes beyond what the naked eye can see.
Pacific’s position in the Green River Valley means damp winter air pushes into masonry chimneys and accelerates spalling of the chimney crown and firebox mortar. An Chimney Inspection here often finds water damage earlier than in drier, higher-elevation cities nearby. Because so many Pacific homes are older mill-era houses with original masonry flues, a Level 2 camera inspection frequently reveals cracked or unlined flue liners that an exterior glance would never show. That is the single most common finding we see in Pacific, and it is exactly why we run a camera on nearly every job in this city.
Why Flint Chimney Sweep Is Pacific’s Preferred Chimney Inspection Company
Flint Chimney Sweep has operated since 2002 as part of the Garrison Partners family of independently owned chimney service companies. We run every Pacific job under The Garrison Standard: a written price before any tool comes off the truck, a background-checked uniformed technician at the door, and a 365-Day Done Right Promise on every repair. The number you approve is the number on the invoice. No moving the price at the door, no vague verbal quotes.
A homeowner on 3rd Avenue SW in Pacific called us because their damper was sticking and they smelled smoke in the living room on cold mornings. Our tech ran a Level 2 inspection with a camera up the flue liner, found second-degree creosote and a hairline crack in the original clay tile, and recommended a HeatShield resurfacing rather than a full reline. We left them a photo report showing the crack and the glaze, agreed the price before we booked the repair, and scheduled it two weeks out. No rush, but not something to sit on through another burn season.
We answer the phone with a live person around the clock, every day of the year. When a Pacific homeowner calls at 9pm on a December evening because they smell smoke, a real human picks up. No voicemail tree, no callback form. That matters in a city where chimney problems show up suddenly during the first real cold snap of fall.
Fireplace Inspection in Pacific
Fireplace Inspection in Pacific homes focuses on the firebox, damper, and the visible portion of the flue that connects your fireplace to the chimney above. In this city, the wet Green River Valley air works against fireplace masonry year-round, and we often find rusted dampers and eroded firebox mortar in houses that have rarely burned more than a cord per season. A standard fireplace inspection runs $189 to $249 depending on access and flue length.
What Gets Checked
We examine the firebox walls for cracked brick and missing mortar joints, the damper for full operation and rust, and the smoke shelf for debris. On older Pacific homes with original masonry fireplaces, we pay close attention to the mortar joints closest to the hearth, because that is where damp air intrusion shows up first. Every finding goes into a photo report you keep.
When to Book One
Book a fireplace inspection before your first burn of the season, after any chimney fire, or before you buy or sell a home in Pacific. If you have lived in your house through two or more Pacific winters without any chimney service, you are due. The cost is less than one emergency repair bill.
Chimney Inspection Services in Pacific
Chimney Inspection Services in Pacific cover the full system from the firebox to the crown, and we offer all three industry-standard levels: Level 1 for maintained systems, Level 2 for real estate transactions or after a chimney fire, and Level 3 when structural damage is suspected. A Level 1 inspection in Pacific runs $189 to $229, a Level 2 with full camera work runs $299 to $349, and a Level 3, which involves opening wall sections, is quoted only after a Level 2 points to serious structural concerns.
Level 2 Camera Inspection
This is the inspection we recommend most often in Pacific. A waterproof camera goes up the full length of the flue, recording the interior liner, joints, and any cracks or separations. In mill-era Pacific homes with original clay tile liners, this is where we find the hairline cracks and separated joints that let heat and carbon monoxide reach the framing. You get the photos. You see exactly what we saw.
Real Estate Inspection
Real estate inspections in Pacific are almost always Level 2. Buyers want proof the flue is intact before they close, and sellers want a clean written report to keep the deal moving. We have done hundreds of these in Pacific and the surrounding King and Pierce County market, and our photo reports are accepted by local agents and inspectors.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pacific
We install and work with materials from Olympia Chimney, Famco, and Copperfield, and we specify the product by the job, not by what carries the highest margin. If a Pacific chimney needs a new cap, a new damper, or a repointed crown, the material name goes on your written quote before you approve it. We keep common Pacific house sizes in our stock staging, so most repairs scheduled in this city go forward on the day we agreed, without waiting on a special-order part.
Common Chimney Inspection Problems We See in Pacific Homes
- Cracked chimney crowns and missing caps. Pacific’s wet winters saturate masonry crowns, and the freeze-thaw cycle in January and February spalls the concrete. Water then seeps into the flue and firebox, rusting dampers and eroding mortar.
- Cracked or separated flue liners in mill-era homes. Original clay tile liners in Pacific houses built before the 1960s crack at the joints over time. Only a camera inspection shows the separation, and it is the difference between a safe burn season and a chimney fire risk.
- Second-degree creosote glaze in wood-burning fireplaces. Pacific’s damp air contributes to lower flue temperatures and incomplete combustion, which produces a tar-like creosote that a brush alone will not remove. It needs chemical treatment or liner work.
- Rusted dampers and smoke-shelf debris. Moisture from the Green River Valley air plus decades of use leaves many Pacific dampers seized or rusted. Birds and debris that entered through an uncapped chimney collect on the smoke shelf, and restrict draft.
Pricing for Chimney Inspection in Pacific, WA
A standard Level 1 chimney inspection in Pacific runs $189 to $229. A Level 2 camera inspection runs $299 to $349. If the inspection finds a repair that needs doing, the repair quote is separate and always delivered in writing before any work starts. Every price is flat and agreed before we book the job. You will never get a surprise line item on the invoice. If a repair we make fails within one full year, we return at no charge under the 365-Day Done Right Promise. Call (830) 251-4560 and we will give you an exact price over the phone.
We Also Serve Cities Near Pacific
Our Pacific crews regularly inspect chimneys in Auburn, Milton, Federal Way, and Puyallup. Homeowners in those cities get the same written price guarantee and the same one-year repair warranty. If you are in one of those areas and need a chimney inspection, call the same number and we will route a technician to you.
Serving Pacific, WA - Our Local Coverage Area
We’re based in the Pacific area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Pacific
Once a year if you burn wood regularly, and at least every two years if you use your fireplace occasionally. Pacific’s damp Green River Valley air accelerates masonry wear and creosote buildup, so skipping multiple years in this climate is riskier than in a drier city. Call (830) 251-4560 to book an inspection.
A Level 1 is a visual check of accessible parts and costs $189 to $229. A Level 2 adds a full camera scan of the flue interior and costs $299 to $349. A Level 3 is a structural investigation that involves opening walls and is only done when damage is known or strongly suspected. Most Pacific homes need a Level 2 at least once.
Yes. Every inspection gets a written price before you book, and the price does not change when the technician arrives. The figure you hear on the phone is the figure on your invoice. Call (830) 251-4560 and we will quote your exact inspection cost based on your chimney type and the level you need.
It shows the interior of your flue liner, joint by joint, in full color. You will see cracks, separations, creosote buildup, and any obstruction. You keep the photos. We never recommend a repair without showing you the image that justifies it, and we will say plainly when work can wait.
Work can safely wait when the inspection finds only light creosote and minor cosmetic wear. It needs attention now when the liner is cracked or separated, the crown is spalling badly, or third-degree creosote glaze is present, because those conditions put carbon monoxide and heat where they should not be. If you are not sure, call (830) 251-4560 and we will tell you straight.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Pacific, WA since 2002.