Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Inspection Across Sharon
A chimney inspection in Sharon, MA typically costs between $149 and $549 depending on the level of inspection your home needs. Most homeowners in Sharon schedule a Level 1 or Level 2 inspection once a year, and we book every job with a written price before any tools come off the truck. If you live off Massapoag Avenue, up near Moose Hill, or in the older neighborhoods around the town center, our Chimney Inspection team knows the housing stock and what to look for inside a Sharon flue. Call (830) 251-4560 and a live person will answer, take the details, and get you on the schedule.
Why Flint Chimney Sweep Is Sharon’s Preferred Chimney Inspection Company
Flint Chimney Sweep has been in business since 2002 as part of the Garrison Partners family of independently owned chimney service companies. Every inspection we run in Sharon follows the same Garrison Standard: a written price before work starts, a uniformed and background-checked technician on site, and a scope that is agreed before booking. Homeowners on Moose Hill Street, Bayberry Drive, and Edge Hill Road tell us the same thing: they do not want to be told the chimney has a “big problem” without seeing it themselves. So we put everything in writing and we send a photo report after every camera inspection.
We are not the cheapest chimney company in Sharon, and we do not try to be. What you get is a crew that shows up when scheduled, works clean, and stands behind every repair with a written one-year guarantee. If a covered repair fails within that year, our tech returns at no charge. That is the 365-Day Done Right Promise, and it applies to every repair we make in Sharon.
Chimney Leak in Sharon
Chimney Leak work in Sharon usually traces back to one of four spots: the flashing where the chimney meets the roofline, the crown cap on top of the masonry, the flue liner itself, or the brick and mortar joints that have absorbed years of New England rain and snow. Sharon’s freeze-thaw cycle is rough on exterior masonry. Water soaks into brick and mortar through fall and early winter, freezes on cold January nights, and slowly spalls the surface, opening hairline cracks that widen each season. A leak that smells musty in summer or stains the ceiling near the fireplace in spring has usually been working its way through for a year or more.
Flashing and Crown Repairs
When flashing rusts or lifts, water finds the gap at the roofline and runs down inside the chase. We inspect the full perimeter around the chimney, photograph every joint, and put a written scope in front of you before any repair begins. Crown caps get the same treatment: cracked crowns get sealed with HeatShield, a product we specify when the existing crown is structurally sound but weathered.
Liner Leaks and What They Look Like
A cracked clay tile liner does not always show up as water on the hearth. Sometimes the first sign is an odor on a humid day, which is exactly what happened on Moose Hill Street when a damp, sticky smell near the fireplace turned out to be water moving through a hairline crack in the flue liner. We ran a camera, documented the crack with stills, and sent the homeowner a photo report before quoting any work.
Chimney Camera Inspection in Sharon
Chimney Camera Inspection in Sharon is the part of the job that answers the question you actually need answered: what is really inside that flue right now. We run a high-resolution camera from the firebox up through the flue liner to the crown, and we capture stills at every point of interest: the smoke chamber, the transition area, the clay tiles, the cap. When we finish, you get a photo report with the stills and a written explanation of what they show. Nothing gets recommended that you have not seen with your own eyes.
When a Camera Scan Is the Right Call
Sharon’s older center-chimney capes and colonials often have the fireplace flue sharing a chase with the furnace or boiler vent. A visual look from the firebox cannot tell you what is happening at the mid-flue or near the top, which is why a Level 1 inspection frequently upgrades to a camera scan on these homes. If your house is over 40 years old and the flue liner has never been inspected, a camera scan usually pays for itself in avoided guesswork.
What Photos Actually Prove
The point of the photo report is simple: you should not have to trust a contractor’s word on a repair quote. We document what we find, label each image, and hand over the report whether the result is “everything looks good” or “this needs work now.” That is also what keeps this honest: if the liner looks sound, we tell you that. If it needs a chemical treatment instead of a brush, we show you the glaze on screen and explain the difference.
Trusted Brands We Service in Sharon
We work with professional-grade chimney materials from brands like HeatShield, Gelco, and Olympia Chimney, because the liner and crown repairs we make in Sharon are only as good as the products going into them. We keep common components on hand for faster turnaround on repair work, and we specify the brand by the job, not by the margin. When a Sharon chimney needs a flue relining or a crown seal, you will see the product name on your written scope, and you can verify it independently before we start.
Common Chimney Inspection Problems We See in Sharon Homes
- Shared flue chases with furnace or boiler vents. Many center-chimney capes in Sharon route the oil or gas appliance flue through the same masonry chase as the fireplace. A cracked tile liner inside that shared space can let carbon monoxide drift into living areas, not just up the flue.
- Glazed third-degree creosote on clay tile liners. Sharon’s older homes burn wood in masonry fireboxes, and creosote that bakes into a hard glaze cannot be brushed off. It requires chemical treatment or, in worse cases, a liner replacement. Brushing alone leaves a false “all clean.”
- Crown spalling from freeze-thaw cycles. The wet New England winter works on exposed masonry every single year. Sharon chimneys that go a few seasons without crown maintenance develop cracks that let water into the top courses of brick.
- Sticking dampers and humid-day odor. Homeowners on Moose Hill Street and around Massapoag Lake often report a stale, smoky smell during humid summer weather. That is usually moisture in the flue meeting creosote residue, and it is worth a camera look even if the firebox looks fine.
Pricing for Chimney Inspection in Sharon, MA
A Level 1 inspection in Sharon, where the chimney is being used the same way it was the year before, typically runs $149 to $249. A Level 2 inspection, which adds a camera scan of the flue liner and smoke chamber, usually lands between $299 and $549, depending on chimney height, access, and whether the flue shares a chase with an appliance vent. A Level 3 inspection, which involves opening concealed areas of the chase, is quoted case-by-case and only comes up when a Level 2 scan shows significant hidden damage. We give you the written price before any work starts, every single time. Call (830) 251-4560 for an exact quote on your Sharon chimney: the estimate is free, and you will get the number in writing before you commit.
We Also Serve Cities Near Sharon
Sharon sits close to several towns where we run the same inspections under the same Garrison Standard, including Walpole, Norwood, Brockton, and Medfield. If you are just over the line in any of those towns, our Chimney Inspection in Sharon scheduling covers the same service radius and the same written-price policy.
Serving Sharon, MA - Our Local Coverage Area
We’re based in the Sharon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Sharon
Yes, because the issue is not only how much you burn, but what is happening inside a flue that sits unused most of the year and what shares the chase. Sharon’s older homes often route furnace and boiler vents through the same masonry chimney, so a crack that never sees fireplace smoke can still let carbon monoxide move into living space. A quick Level 1 inspection catches that, and a camera scan catches what the eye cannot. Call (830) 251-4560 and we will tell you straight whether a full scan is worth it for your house.
A Level 1 inspection covers the accessible parts of the chimney, including the firebox, damper, cap, and basic structural check; a Level 2 adds a camera scan of the flue liner and smoke chamber; a Level 3 opens concealed areas of the chase when Level 2 finds hidden damage. Most Sharon homes need a Level 1 every year, plus a Level 2 any time the house changes hands, the chimney was just repaired, or there is a suspected liner issue. Homes older than about 40 years with original clay tile liners are the most likely to benefit from an initial Level 2, because paint and brickwork can hide cracks that only a camera will show.
No, and any contractor who says they can is guessing. What we can do over the phone is walk through what you are seeing or smelling, make a booking for an inspection, and give you a written price before any work happens. The actual condition of a Sharon chimney comes down to what a camera sees inside the flue. Everything else is speculation.
Third-degree creosote looks like a hard, shiny, tar-like coating, often black or dark brown, baked onto the flue liner surface. The reason a brush cannot remove it is that it is no longer a loose, flaky deposit: it has hardened and bonded to the liner. Removing it requires chemical treatment, and in many cases the liner itself has already been compromised by the heat that produced the glaze. That is exactly why we do not call a flue “clean” after a brush unless the camera confirms it is clean.
No. Flashing leaks are common in Sharon, especially on older colonials and capes where the original sheet metal has lifted or corroded at the roofline. In many cases the flashing can be repaired or replaced without touching the masonry, and the chimney itself is fine. What matters is that the leak is diagnosed correctly before you pay for work. We photograph the flashing, the crown, and the liner, then give you a written scope that separates what needs fixing from what can safely wait.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Sharon since 2002.