Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Inspection Across Wellington
A chimney inspection in Wellington costs $189 – $449 depending on the level, and the camera work is usually finished inside two hours. If you live near Wellington Trace, in the equestrian neighborhoods off South Shore Boulevard, or in the zero-lot-line communities off State Road 7, we can typically get a uniformed, background-checked tech to your door within a few business days. Hank Delano runs our Wellington crews by one rule: no tool comes off the truck until you’ve seen a written price. Call (830) 251-4560 and a live person answers, any hour.
Why Flint Chimney Sweep Is Wellington’s Preferred Chimney Inspection Company
Wellington homeowners keep calling us back because we write everything down before we start. Every inspection gets a flat quote in writing, a scope that names what we’re opening, what we’re camera-ing, and what the report will include. No door-knock price changes. That’s the Garrison Standard, and it applies to every job Hank and his crew run in Wellington.
The reviews from Wellington specifically mention two things: the photo report and the fact that nobody showed up late. We send a copy of every camera finding, including before and after photos when we clean during the same visit. If a covered repair fails within a year, we return free under the 365-Day Done Right Promise. That’s a written guarantee, not a handshake.
Dispatch for Wellington is coordinated from our Miami metro office, but the techs know this city. They know the difference between the masonry work in the older sections near Big Blue Trace and the factory-built units going into the newer builds east of 441. That matters when you’re deciding whether a Level 1 will do or whether the camera needs to come out.
Fireplace Inspection in Wellington
Fireplace inspection in Wellington means we open the damper, run a camera up the flue, and check the firebox brick and mortar before we tell you it’s safe to light a fire. Most Wellington homes built before 1995 have masonry fireplaces with clay tile liners – and after 25 to 40 years, those tiles crack. A visual look from the hearth misses what the camera sees.
What We Check on a Masonry Fireplace
We check the damper seat, the smoke chamber walls, the flue liner surface, the crown, the cap, and the exterior mortar joints. On Wellington ranch homes along the equestrian corridor, we see spalling crowns on nearly half the chimneys we inspect. Rain gets into the crown cracks, works down through the masonry, and you don’t notice until the ceiling stain shows up in the living room.
What We Check on a Factory-Built Fireplace
On the newer zero-lot-line builds and townhome communities, we inspect the flue pipe joints, the termination cap, and the firebox refractory panels. Failed caps on factory-built systems are the most common finding in Wellington’s newer sections. The cap rusts, rain drops straight down the flue, and the first sign is often a rust stain inside the firebox.
Chimney Inspection Services in Wellington
Chimney inspection services in Wellington fall into three levels, and we quote each one before we book. A Level 1 inspection runs $189 – $249 and is appropriate when you’ve used the fireplace regularly and nothing has changed since the last inspection. A Level 2 inspection runs $349 – $449 and includes the video camera. That’s the one Wellington homeowners need after a storm, before buying a home, after any chimney fire, or when switching fuel types.
Level 1 vs. Level 2 in Wellington Homes
A Level 1 is a visual check of everything we can reach without special equipment – firebox, damper, cap, basic flue condition. It takes about 45 minutes. A Level 2 adds the camera scan of the entire flue interior and the smoke chamber, plus the exterior crown and flashing. That’s the honest minimum for real estate transactions in Wellington, and most inspection reports we generate for home sales are Level 2.
When a Level 3 Inspection Is Called For
A Level 3 inspection goes beyond the camera and can involve opening a portion of the chimney structure to access hidden areas. It’s rare in Wellington. We only recommend it when a Level 2 camera scan shows damage serious enough that we can’t verify clearance to combustibles without opening the chase. You get the Level 2 images first, and you decide.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wellington
We install and repair factory-built systems from Copperfield and Famco, and when a Wellington chimney needs a new liner, we use DuraFlex and HeatShield products specified by the job, not by margin. Because we stock common parts locally, turnaround on a failed cap or a cracked refractory panel is usually faster than a generic shop that has to order everything. We’ll tell you the brand and model of what we’re installing, so you can verify it yourself.
Common Chimney Inspection Problems We See in Wellington Homes
- Spalling brick and cracked crowns on 1980s masonry chimneys. The original crowns on homes near Wellington’s equestrian corridor weren’t poured with a drip edge, so water wicks back into the brick. By the time you see bricks flaking, the crown has been failing for years.
- Failed caps on factory-built systems in newer communities. The stock galvanized caps on many zero-lot-line builds rust out in 8 to 12 years. The cap is cheap; the water damage from a missing cap isn’t.
- Second-degree creosote glazing going unnoticed. We come out behind other companies’ sweep-only visits and find glazed creosote the previous tech never saw because he never ran a camera. Glaze hardens into tar, and only chemical treatment or a new liner fixes it.
- Dampers that won’t seal and firebox mortar joints that are spalled. A sweep-only visit misses both because nobody opens the damper and taps the firebox brick. Wellington’s humidity accelerates spalling in unsealed fireboxes, especially in homes that sit empty through summer.
Pricing for Chimney Inspection in Wellington, FL
A Level 1 chimney inspection in Wellington runs $189 – $249. A Level 2 inspection with the camera runs $349 – $449. If we sweep during the same visit, the combined price typically lands between $299 and $549 depending on flue condition and accessibility. What moves the number: roof pitch, flue height, whether the cap needs removal to access the flue, and how much creosote is in the smoke chamber. You’ll see the line items in writing before we start. Call (830) 251-4560 for a free estimate, and Hank will give you the range over the phone.
We Also Serve Cities Near Wellington
Our Chimney Inspection crews work throughout central and western Palm Beach County, including Wellington and the surrounding communities of Royal Palm Beach, Greenacres, West Palm Beach, and Palm Beach Gardens. Same written-price policy, same photo report, same one-year written guarantee in every one of those cities.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Wellington
Once a year if you burn fires regularly, and once every two to three years if the fireplace is decorative or rarely used. Wellington’s humidity and summer rain pattern make annual inspections more important here than in drier climates because crowns and flashing fail faster. If you skip a year, you’re not automatically in danger – but if a crown crack opened during hurricane season, you’d rather know from a $249 inspection than from a ceiling stain. Call (830) 251-4560 to schedule.
A Level 1 is a visual check of accessible components, a Level 2 adds a full video scan of the flue interior and smoke chamber, and a Level 3 involves opening part of the chimney structure to examine what the camera can’t reach. In Wellington, Level 2 is the most common inspection for real estate transactions and post-storm checks. Level 3 is rarely needed, and we won’t recommend it unless the Level 2 images show a reason. Call (830) 251-4560 and we’ll walk you through which level fits your situation.
We can get close, but we won’t finalize a recommendation without seeing the flue. If you burn more than two cords of wood a season, you almost certainly need a sweep plus a Level 2 inspection. If the fireplace has been idle for years, an inspection alone often covers it. The honest answer is that we’ll know in the first five minutes on site. Call (830) 251-4560 and Hank will give you a straight read on what’s most likely, plus the price range for each option.
No. You get the photo report, the written scope, and the price. If the finding is life-safety critical – like a breached flue liner or a missing cap over a gas system – we’ll tell you that plainly and recommend you not use the fireplace until it’s addressed. If it’s a hairline crack or a first-degree creosote layer, we’ll say so and tell you it can wait. Nothing is recommended without camera evidence you can see for yourself. Call (830) 251-4560 to talk through what we found.
Yes. We work on Copperfield and Famco factory-built systems regularly, and we stock common replacement caps and refractory panels for the models we see most often in Wellington’s newer communities. If we don’t have the part on the truck, we can typically source it within days from our local supplier network. Call (830) 251-4560 and we’ll confirm we service your specific unit.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Wellington since the Garrison Partners founding in 2002.