Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Brentwood
Chimney repair in Brentwood, TN typically runs $350 – $1,800 depending on whether we’re repointing mortar joints, rebuilding a crown, or relining a flue. Most repairs on this side of Williamson County take one visit, and you’ll have a written price in hand before a single tool comes off the truck. Our crews know the Brentwood housing stock: 1980s and 1990s builds off Concord Road, newer construction in the Raintree Forest subdivisions, and everything between. Call (830) 251-4560 and you’ll get a live person on the line, not a voicemail tree, any hour of the day or night. Hank Delano runs our chimney repair operation, and he holds every tech to the same standard: document the problem, quote the repair in writing, and stand behind the work for a full year.
Why Flint Chimney Sweep Is Brentwood’s Preferred Chimney Repair Company
We’re part of the Garrison Partners family, founded in 2002, and we operate under the Garrison Standard on every job we take in Brentwood. That means a written price before any work starts, a written 365-Day Done Right Promise on every repair, and a crew that shows up uniformed, background-checked, and ready to explain exactly what they’re seeing. Dispatch and scheduling for our Brentwood work is coordinated from the brand’s Memphis office, and our local crews serve Brentwood directly. We’re not a franchise that parachutes in and out; we’ve worked in the Franklin and Brentwood corridor long enough to know which chimneys on which streets are prone to which failures.
Hank Delano set the rule early: if a homeowner can’t verify a repair with their own eyes, we haven’t done our job. That’s why every inspection and repair in Brentwood includes camera documentation, and why we walk you through the photos before we ask you to approve a dime of work. Williamson County homeowners call us because a neighbor, a friend in the River Oaks area, or a contractor who works on Old Smyrna Road told them we put everything on paper. That reputation matters more to us than any ad campaign.
Chimney Repair Companies in Brentwood
Chimney Repair Companies in Brentwood generally split into two camps: sweeping-only outfits that refer repairs out, and full-service masonry and liner shops like Flint Chimney Sweep that do the repair on the spot. When a Brentwood homeowner calls us for Chimney Repair, the first question is always the same: what does the camera show? We don’t quote a repair off a description over the phone. We schedule a visit, run a Level 2 camera inspection, and then hand you a written scope with a dollar figure attached. A standard flue-liner repair in Brentwood runs $700 – $1,600. A crown rebuild is typically $450 – $900. A full chimney rebuild above the roofline can hit $3,000 – $6,000, and we’ll tell you plainly if that’s where your chimney is headed or if a smaller repair will hold.
Same-Visit Repairs, Written Quotes
Most of what we see in Brentwood fits into a same-visit repair window. Cracked flue tiles, failing mortar joints, a rusted damper assembly: these are typically done in a morning. Our techs carry HeatShield and Gelco products on the truck for liner work, along with mortar matched to the local brick color so the repair doesn’t leave a scar across your chimney face.
When a Repair Becomes a Rebuild
If the crown has fractured and water has been tracking through the flue for multiple seasons, the damage may run deeper than a patch job can fix. In that case we quote the rebuild at the first visit, with a line-item breakdown you can take to a second opinion if you want one. No one at Flint has ever lost a bid because we were honest about what a chimney actually needs.
Chimney Masonry Repair in Brentwood
Chimney Masonry Repair in Brentwood is one of our most-requested services, and for good reason: the soil under this part of Williamson County moves. Brentwood sits on the karst limestone belt, which means the ground beneath your foundation expands and contracts with moisture in ways that transfer straight up through the masonry. The first thing most homeowners notice is spalling brick, the flaking and crumbling of brick faces, often on the south side of the chimney. Then comes the moisture staining inside the smoke chamber, then the loose crown and displaced flashing.
Mortar Repointing and Tuckpointing
Repointing, also called tuckpointing, means grinding out failed mortar joints to a clean depth and packing in fresh mortar. In Brentwood, where brick homes dominate the 1980s and 1990s subdivisions, a repointing job typically runs $25 – $45 per square foot of wall area. Done properly, it restores the chimney’s structural compression and looks invisible when the mortar color is matched right.
Spalling Brick and Crown Repair
Once brick faces start popping off, you’re past the point of cosmetic repair. That spalling means water has gotten inside the brick and is expanding with every freeze-thaw cycle, and Middle Tennessee does freeze. A partial rebuild of a spalled chimney face in Brentwood runs $1,200 – $3,000, with the final number depending on how many courses have failed and whether the crown needs to come off too. We’ll waterproof after the repair with an Olympia Chimney product, not a box-store sealer that traps moisture inside the wall.
Trusted Brands We Service in Brentwood
We specify materials by the job, not by margin. That means a Brentwood chimney with a cracked clay liner gets a HeatShield resurfacing liner or a Gelco stainless liner, not whatever was on sale at the supply house. A crown rebuild gets Olympia Chimney crown coat and a waterproofing membrane that breathes. We stock these materials locally for Brentwood customers, which cuts turnaround time when a flue scan shows damage that needs to be fixed before the cold snap. Famco caps and dampers round out the list. You’ll see the brand name on your written quote and on the product labeling when the work is done.
Common Chimney Repair Problems We See in Brentwood Homes
- Limestone soil movement through the crown and flashing. The karst bedrock under Brentwood shifts seasonally, which means crowns crack and flashing pulls away in slow motion. The leak doesn’t announce itself; it just drips into the smoke chamber and sits there.
- Smoke-chamber staining without exterior damage. We open up more Level 2 inspections on Brentwood chimneys with clean exteriors and find moisture staining inside the smoke chamber than any other pattern. A Level 1 glance misses it entirely.
- Third-degree creosote glaze hiding behind a normal-looking flue. Many Brentwood homes have fireplaces that were used heavily for years then shut down. The glaze inside the smoke chamber looks like dried tar to an untrained eye, and it’s a chimney fire waiting on the next good burn. A repair scope that doesn’t address it is an incomplete repair.
- Tree canopy debris and animal intrusion. The dense tree cover over much of Brentwood means caps get cracked by falling limbs, and uncapped flues collect squirrel and raccoon debris faster than most homeowners expect. That’s a draft problem and a repair trigger, not just a sweeping item.
Pricing for Chimney Repair in Brentwood, TN
Repointing in Brentwood runs $25 – $45 per square foot. A crown rebuild is $450 – $900. Flue relining, the big one, lands between $700 and $1,600 for a standard single-flue chimney. Flashing repair usually sits between $250 and $600. What moves the needle on most jobs is access: a chimney on a steep-roofed two-story off Crockett Road costs more to work on than a single-story off Wilson Pike, because the setup and safety rigging are heavier. We do not charge to come out and look, and the quote is always in writing before any work starts. If you want the exact number for your chimney, call (830) 251-4560. We do not promise same-day repair; we schedule the visit, quote it on site, and in most cases complete the repair at that same appointment.
We Also Serve Cities Near Brentwood
Our crews handle chimney repair throughout the southern Nashville metro. If you’re in Franklin, Nolensville, La Vergne, or Smyrna, we cover those areas as well. You can read more about our full service footprint on our Brentwood page, but rest assured the same written-quote and full-year guarantee applies wherever the chimney is.
Serving Brentwood, TN - Our Local Coverage Area
We’re based in the Brentwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Brentwood
Once a year, and we’ll be straight with you: if the exterior brick is sound, the previous year’s sweep was clean, and nothing has changed in how the fireplace draws, a Level 1 inspection is sufficient more often than not. But on a Brentwood home that’s gone five-plus years without anyone putting a camera up the flue, or on any chimney built before 2000 in this area, we recommend a Level 2. The limestone soil movement here means hidden crown fractures and smoke-chamber staining can develop between winters, and those aren’t visible from the ground. Call (830) 251-4560 and we’ll tell you which level your chimney actually needs, not just the one we’d rather sell.
No, not reliably. Third-degree creosote glaze looks like a dark, glossy patch or a dull black crust in the smoke chamber, and it can be mistaken for cracked masonry or for a properly coated flue liner. That’s why Flint Sweep runs a camera on every repair scope in Brentwood before quoting. The camera tells us the difference between a thermal crack in a clay tile, a delaminated Gelco liner, and a glaze that needs mechanical removal. Guessing is how homeowners end up paying for a liner repair when the real fire risk is glaze in the smoke chamber. If you smell smoke when the fireplace is cold, call (830) 251-4560 and we’ll run the camera and show you exactly what we see.
Usually, yes. A smoky smell with the damper shut and the fireplace cold almost always tracks back to one of three things: a cracked flue liner letting smoke residue seep into the chimney chase, a failed or warped damper that isn’t seating, or third-degree creosote in the smoke chamber off-gassing into the house when the HVAC pressure changes. We had a repair call off Raintree Drive on a 1990s build where the owner kept smelling faint smoke in the upstairs hallway. A camera run showed a cracked Gelco liner section and glazed creosote in the smoke chamber. We brushed the flue, dropped in a HeatShield resurfacing liner, re-set the damper, and sent her the photo report before we left. No more smell, and we told her the cap and crown were still fine for another year. If you’re smelling smoke with the damper closed, call (830) 251-4560. We’ll find the source instead of selling you a fireplace you don’t need.
No, and we’d be lying to you if we said we could. We’ll schedule the first available visit in Brentwood that fits your calendar, show up inside the window we give you, and in most cases complete the repair at that same appointment. Certain work, like a full crown rebuild with a proper cure window for the crown coat, takes a follow-up visit that’s built into the original written quote. What we do promise is a written price before any work starts and a one-year written guarantee on the repair. That’s the trade-off that matters more than speed. To see our actual availability, call (830) 251-4560.
Minor mortar erosion, hairline cracks in the crown seal that haven’t broken through the surface, and cosmetic efflorescence, the white mineral bloom that appears on brick, can usually wait until the next dry-weather window or the next annual inspection. What cannot wait: spalling brick faces, a crown that’s visibly separated from the flue, flashing that has pulled away from the roofline, or any water staining you can see inside the firebox or smoke chamber. On Brentwood homes specifically, our rule is this: if the damage is on the outside and still superficial, schedule it intentionally. If water is getting inside, schedule it now. If you’re not sure which side of that line you’re on, call (830) 251-4560 and ask for Hank Delano’s crew. He’ll have a tech out to put eyes and a camera on it, and you’ll get a straight answer.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Brentwood and the surrounding area.
Ready for a straight answer and a written price? Call (830) 251-4560 now. A live person answers, 24/7.