Chimney Repair in Calabasas - Inspected on Camera, Then Priced in Writing

Fast, Reliable Chimney Repair Across Calabasas

Chimney repair in Calabasas typically runs between $190 and $2,800 depending on the failure: a stainless cap replacement lands around $340 – $680, while a full flue relining with DuraFlex runs $1,900 – $2,800. Most repairs south of the 101, from Calabasas Park to Mulwood, take a single visit when we have the parts on the truck. We schedule within the week for non-emergency work, and every job gets a written price before anything starts. If your chimney is drafting smoke into the living room, leaking at the flashing, or spalling brick onto the patio, call (830) 251-4560 and we’ll get it squared away.

Call (830) 251-4560

Why Flint Chimney Sweep Is Calabasas’s Preferred Chimney Repair Company

We’ve worked on hundreds of Calabasas chimneys, and the failures here follow a pattern: wind-driven cap damage on open-space lots near the Santa Monica Mountains, spalled firebrick from heat cycling, and creosote glaze that a standard brush never touches. Homeowners we’ve worked with here don’t want a sales pitch. They want a straight answer about whether the liner is actually compromised or whether the flue just needs a proper mechanical cleaning. We give that answer with a camera, not a guess.

Our repair crews show up in uniform, background-checked, and we put every repair in writing before the first tool comes off the truck. That includes the exact scope, the materials we’re using, and the total price. If a covered repair fails within a year, we return at no charge. That’s the 365-Day Done Right Promise, in writing on every repair, under the same Garrison Standard every Garrison Partners location follows. Hank Delano runs our repair program, and he holds the same line: no open-ended estimates, no “while we’re in there” add-ons.

Chimney Cap Replacement in Calabasas

Chimney cap replacement is one of the most common repairs we do in Calabasas, and it’s rarely about the cap rusting out quietly. Santa Ana winds and the open-space lots up Calabasas Peak Motorway and along Mulholland Highway turn a loose cap into a projectile. We regularly find caps torn off their mounting, plugged with oak leaves and sycamore debris, or packed with nesting material from starlings and squirrels. The fix involves removing the old cap, correcting the crown underneath if needed, and mounting a new stainless cap sized to the flue, not just dropped on top.

A standard stainless cap replacement in Calabasas runs $340 – $680 installed, with the written price confirmed before we start. We stock Olympia Chimney and Copperfield caps at our Los Angeles warehouse and dispatch them to Calabasas on the same route as our scheduled repairs.

Wind and Wildlife Damage

In Calabasas Park and the Old Topanga corridor, we see caps that have been blown crooked or peeled off entirely. A missing cap on an open flue is an invitation for birds, rodents, and wind-driven embers, which matters here more than most places. Fire-season prep in this zip code means inspecting the cap and crown before October, not after.

Cap-to-Flue Fit

A cap that doesn’t match the flue tile diameter creates turbulence and actually worsens draft. We measure the flue, not the cap opening, and specify the correct size so the cap holds under wind load and still lets the chimney breathe.

Chimney Liner Installation in Calabasas

Chimney liner installation in Calabasas usually means one of two things: a stainless liner pulling double duty as a flue for a wood-burning fireplace, or a resized liner correcting a draft problem in an older masonry chimney. The work involves running a new DuraFlex liner down the flue, insulating where the code path requires it, and connecting it at the top plate and smoke chamber. In Calabasas, liner failures we see are often tied to the same fire-weather cycle: years of hot burns followed by wind-driven moisture intrusion at the crown, which corrodes the liner from the top down.

A DuraFlex liner installation here typically runs $1,900 – $2,800, including the liner, insulation, top plate, and cap connection. We write the full price before the job starts, and the liner carries the same one-year written guarantee as every other repair we do.

Relining vs. Resurfacing

When the flue is cracked but structurally sound, HeatShield cerfractory resurfacing can rebuild the liner surface without a full replacement. We’ll show you the camera footage so you can see the cracks yourself, then tell you plainly whether a full liner is needed or whether resurfacing is enough. In Calabasas we’ve done both, and the right call depends on what the camera shows, not on the margin.

Draft and Carbon Monoxide

A compromised liner isn’t cosmetic. It’s the barrier between combustion gases and the house framing, and in a two-story Calabasas home with bedrooms over the fireplace, that barrier matters. If your draft has gone weak or you smell smoke inside, don’t wait until the utility company flags it. Call us and we’ll run a Level 2 camera inspection to see exactly what’s happening inside the flue.

Trusted Brands We Service in Calabasas

We carry DuraFlex stainless liners, Olympia Chimney caps, and Famco dampers on our repair trucks, and we stock these same brands for Calabasas customers at our Los Angeles distribution point so a repair doesn’t stall waiting on a part. When you see a DuraFlex tag on the liner or an Olympia cap on the flue, you can look up the spec sheet yourself and confirm what’s on your chimney. We name the brands because the written guarantee is only worth the materials behind it. If a repair calls for a Copperfield cap or a HeatShield resurfacing job, we specify it on the written estimate before you approve a dollar.

Common Chimney Repair Problems We See in Calabasas Homes

• Wind-driven debris blocking the flue. Homes backing up to open space in Calabasas Hills and De Anza Park gather sycamore leaves, palm fronds, and dust in the flue even when the fireplace hasn’t been lit in months. Left long enough, this blocks draft and pushes carbon monoxide back into the living space.
• Spalled firebrick and cracked mortar joints. Heat cycling through Calabasas winters, followed by moisture intrusion at the crown, causes the firebrick to flake and the mortar to crumble. Homeowners often mistake this for “just needing a sweep” when what they actually need is repointing or crown repair.
• Third-degree creosote glaze in the smoke chamber. This glossy, tar-like layer forms from low-temperature wood fires and cannot be removed with a standard wire brush. It’s a chimney fire fuel load, and a camera inspection is the only way to see how thick it is.
• Flashing failures after Santa Ana wind events. Wind rips at the sheet metal where the chimney meets the roofline, breaking the seal and letting water track down into the ceiling and firebox. In Calabasas, we see this most often on older homes along Las Virgenes Road where original flashing has gone past its service life.

Pricing for Chimney Repair in Calabasas, CA

We Also Serve Cities Near Calabasas

Our Chimney Repair crews cover Calabasas, Topanga, Agoura Hills, Oak Park, and Westlake Village on the same weekly route. If you’re just over the line in Topanga or up in Oak Park, the same written-price process and one-year guarantee apply. You can read more about our full service area on the Calabasas page, or just call (830) 251-4560 and ask.

FAQs About Chimney Repair in Calabasas