Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Cedar Park
Most chimney repair calls we get in Cedar Park start the same way: a water stain on the ceiling near the fireplace, a damp smell after rain, or a crown that looks cracked from the yard. The repair itself is rarely the big mystery. The hard part is knowing what actually failed. Flint Chimney Sweep sends a background-checked, uniformed tech to your door with a camera, a moisture meter, and a written price before any work starts. We serve all of Cedar Park, from Buttercup Creek to Ranch at Cypress Creek, and you can reach a live person 24/7 at (830) 251-4560.
Why Flint Chimney Sweep Is Cedar Park’s Preferred Chimney Repair Company
Cedar Park homeowners tend to ask the same question before booking: will the quote change once the tech gets on the roof? With us, no. Every repair gets a written price before a tool comes off the truck, and the number on that paper is the number on the invoice. That rule has not changed since 2002, when Flint Chimney Sweep became part of the Garrison Partners family. The Garrison Standard applies to every job we do, which means a written 365-Day Done Right Promise on every repair, valid for a full year from the service date. If a covered repair fails within that year, we return at no charge. No argument, no billing department, just a live person on the phone.
Our techs know the Cedar Park housing stock. They know that a chimney on a 1998 home off Anderson Mill Road has different failure patterns than one on a 2015 build off Lakeline Boulevard. They also know the black clay soil here moves more than people expect, and that movement shows up in crown and mortar joint cracks before it ever shows up inside the firebox. When you call Flint for Chimney Repair, you get someone who has worked on hundreds of chimneys in this city, not a rotating subcontractor learning your address from a GPS.
Chimney Repair Companies in Cedar Park
Chimney Repair Companies in Cedar Park are not hard to find. A company that puts the scope of work in writing before touching your chimney is rarer. What we do on a repair call is straightforward: inspect the crown, flashing, mortar joints, flue liner, and firebox, then hand you a written diagnosis with photos and a fixed price. No verbal “should be around” numbers. No credit card required to get the estimate. Our repair pricing in Cedar Park typically runs $180 to $340 for mortar repointing on a single face, $400 to $900 for flashing replacement depending on chase height and material, and $1,200 to $2,800 for crown rebuilds with proper overhang and drip edge. Larger rebuilds and full tuckpointing jobs scale from there, and you will have the number in writing before we start.
Crown and Flashing Work
Cedar Park’s dry summers and wet springs punish chimney crowns. The thermal expansion of a builder-grade crown meeting a cold February rain is usually what starts the crack. Once water gets through the crown, it tracks down the flue tile and into the smoke chamber, which is why so many homeowners mistake a crown leak for a liner problem. We rebuild crowns with the right overhang and a drip edge, and we reset or replace counter-flashing that was never stepped into the mortar properly. This is the most common repair we perform in Cedar Park.
Liner and Smoke Chamber Repairs
When the flue liner develops cracks or gaps, or when glazed second-degree creosote has been brushed but not camera-verified, we address it. Our techs run a camera up the flue before and after every repair, and you get a photo report showing exactly what changed. For liner work we use professional-grade products like HeatShield and HomeSaver, specified by the condition of your flue, not by what is easiest to stock. If the camera shows a flue that is sound, we tell you that plainly. We do not sell liners to chimneys that do not need them.
Chimney Masonry Repair in Cedar Park
Chimney Masonry Repair in Cedar Park means addressing what the soil, the sun, and twenty years of Central Texas weather have done to the brick and mortar above your roofline. Cedar Park sits on black clay that shrinks in drought and swells after rain, and that movement telegraphs straight up into the chimney chase. We see it as spalling brick faces on chimneys along Ronald Reagan Boulevard, hairline cracks in mortar joints on homes in the Reserve at Cedar Park, and leaning caps on older chimneys near the Cedar Park High School area. Masonry repair keeps water out of the chase and keeps small cracks from becoming structural problems.
Mortar Repointing and Tuckpointing
Repointing is the careful process of removing failed mortar joints and packing in fresh mortar matched to your existing brick color and joint profile. Tuckpointing is the finer version, cutting out the face of the joint and replacing it with a precise line of lime mortar, used more often on older or architecturally detailed chimneys. In Cedar Park, mortar repointing on a standard chimney face typically runs $180 to $340 per face. Full tuckpointing of a two-story chimney can reach $1,500 to $4,000 depending on access and joint depth. Every job gets a written scope and a one-year written guarantee.
Spalling Brick and Waterproofing
Spalling is what happens when water soaks into brick and freezes or bakes, popping the face off the brick in flakes and chips. Cedar Park sees spalling most often on north-facing chimney faces that hold moisture after storms. Our techs cut out the damaged brick, replace it with matched units, then apply a breathable waterproofing treatment, typically Gelco or ChimneySaver, so water vapor can escape but rain cannot get in. Chimney waterproofing in the Cedar Park market runs $350 to $750 for a standard single-flue chimney, and we include it in the written quote if the chimney inspection shows it is needed.
Trusted Brands We Service in Cedar Park
We stock and install materials from a focused list of chimney trade brands, because the repair is only as good as what goes into it. For our Cedar Park customers that means HeatShield for flue liner joint repair, Gelco for chimney waterproofing, and Famco for cap and chase cover replacements. When we quote a job off Cypress Creek Road or Ranch Trails Drive, the quote names the specific product we will use and why. You can look up the brand, verify the spec, and hold us accountable before we start. That is how we have always worked, and it is part of The Garrison Code: nothing specified by margin, only by what the chimney needs.
Common Chimney Repair Problems We See in Cedar Park Homes
- Builder-grade crown failure inside the first ten years. On Cedar Park homes built in the 1990s and 2000s, the original crown is often a thin bed of mortar with no drip edge. The black clay soil’s seasonal shrink-swell works the crown loose, and the leak reads as a damper or flue problem until someone runs a camera. We rebuild these with proper overhang and sealant.
- Counter-flashing pulled out of the chase. After a dry summer, the chase masonry around the chimney can gap just enough for the counter-flashing to lift. Water wicks behind the brick, showing up as spalled faces, rusted firebox panels, and a rust trail down the damper. Resetting or replacing that flashing stops the leak at the source.
- Glazed creosote hiding in the smoke chamber. A brushing that cleans the flue walls but never camera-verifies the smoke chamber can leave glazed second-degree creosote in pockets. A later hot burn reignites it. We camera-check the smoke chamber on every sweep and repair call in Cedar Park.
- Cap and chase cover rust-through on two-story chases. Cedar Park chases with original galvanized chase covers rust out from the inside once the paint fails. The leak rots the chase framing and drips into the firebox. We replace rusted covers with stainless and install proper caps to stop the cycle.
Pricing for Chimney Repair in Cedar Park, TX
A standard mortar repointing job on one chimney face in Cedar Park runs $180 to $340. Flashing repair or replacement runs $400 to $900 depending on chase height, the condition of the surrounding mortar, and whether the counter-flashing was ever stepped in correctly. Crown rebuilds with proper overhang and drip edge run $1,200 to $2,800 for a single flue. Spalling brick repair starts around $250 per brick face cut-and-replaced and can reach $2,000 or more when large sections of the chase need rebuilding. Waterproofing runs $350 to $750. Every number here is a written number before we begin. Call (830) 251-4560 and a live person will get you a free estimate, no voicemail tree, no callback form.
We Also Serve Cities Near Cedar Park
Our crews live in the area and serve the whole corridor. We handle Chimney Repair in Cedar Park as well as Leander, Round Rock, Pflugerville, and Georgetown. If you are close to the Cedar Park line in any direction, you still get the same written price and the same one-year guarantee. Dispatch and scheduling run from the brand’s Austin office, and crews serve Cedar Park locally.
Serving Cedar Park, TX - Our Local Coverage Area
We’re based in the Cedar Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Cedar Park
Once a year, and that is not us being conservative, it is the recommendation of the National Fire Protection Association. In Cedar Park, the climate makes that annual check more important than it would be in a milder city. The black clay soil movement, the dry-summer baking, and the spring rain cycles all work on your crown and mortar joints whether you burn or not. A chimney that never gets used still needs an inspection, because water entry does not care if you had a fire last winter. Call (830) 251-4560 to book one; the written quote, if any repair is needed, comes before any work starts.
Yes, always. Every job gets a written price before a single tool comes off the truck. You see the scope, the materials, and the total. If the repair is more than one trade line, you see the line items. Nothing gets added at the door, and the invoice matches the quote. That has been our rule since 2002, under the Garrison Standard.
Sometimes it can, and we will tell you when that is true. A small mortar joint with no water entry and no spalling can often wait, especially if you are not burning. A crown that is actively leaking into the smoke chamber cannot wait, because the cost moves from a $300 repoint to a multi-thousand-dollar rebuild the longer water runs through it. If water has been coming through, get it looked at before the next rain. The estimate is free, and the camera report shows you exactly what is happening up there.
A proper repair starts with the tech on the roof, looking at the crown, flashing, chase, and cap. Then the damper, smoke chamber, and flue liner get inspected, and the tech runs a camera up the flue. You get a photo report showing what was found. Then you get a written price. The repair itself depends on the finding: we may cut out failed mortar and repoint, reset flashing, rebuild a crown, replace a chase cover, or apply a waterproofing membrane. When the work is done, we camera-check again and hand you the before-and-after. You never have to guess what happened up there.
No, and we would rather tell you that straight than promise a service window we cannot keep. Sweeps and repairs are booked by appointment, and the urgency with chimney repair is seasonal, ahead of burning season or before the next sustained rain. If you have an active leak, call us at (830) 251-4560 and we will get you on the schedule as soon as a crew is available. We do not overbook, and when we give you a window, the tech is inside it.
At a two-story home off Little Elm Trail, our tech found the original builder-grade chimney crown spider-cracked and the counter-flashing pulling away from the chase after a dry summer, letting water track down the smoke chamber and stain the damper. We chipped out the failed crown, rebuilt it with a proper overhang and drip edge, reset the flashing, then ran a camera up the flue liner and handed the homeowner a photo report showing clean mortar joints and no spalling before we closed the cap. A brush-and-go company would have swept the flue and left the leak exactly where it was. That is the difference: we document what we found, write down what we will do, and then do exactly that.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Cedar Park as part of the Garrison Partners family since 2002.





Before
After
Before
After
Before
After