Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Celina
Chimney repair in Celina, TX typically costs $400 – $2,800 depending on whether you’re dealing with cracked mortar on a 40-year-old ranch near the downtown square or flashing failure on a brand-new build off Preston Road. Most spalling brick repair and mortar repointing jobs in Celina run $400 – $1,500. We’re Flint Chimney Sweep, and we’ve been repairing chimneys since 2002 under Hank Delano’s leadership. We dispatch background-checked, uniformed technicians to Celina five days a week, and every single job starts with a written price before any tool comes off the truck. Call (830) 251-4560 and a live person picks up. Not a voicemail tree.
Why Flint Chimney Sweep Is Celina’s Preferred Chimney Repair Company
Celina homeowners call us because we operate under The Garrison Standard: a written price in hand before work starts, a written guarantee on every repair, and a live person on the phone around the clock. That structure matters in a city like Celina, where a homeowner might be dealing with a 1970s brick ranch one block from the square or a two-year-old build in Mustang Lakes. The repair approach is different for each, but the process doesn’t change. We quote. You approve. We repair. You get a photo report.
Our technicians know Celina’s housing stock because they’ve worked it. We’ve walked chimneys in neighborhoods along Ohio Drive, through the older lots near downtown, and out in the newer phases west of Preston Road. Homeowners tell us the same thing: previous chimney companies either no-showed or moved the price after the work started. That’s not how we operate. The 365-Day Done Right Promise means if a covered repair fails within a year, we return at no charge. No argument, no re-quote.
Chimney Masonry Repair in Celina
Chimney masonry repair in Celina means restoring the brick, mortar, and concrete structure of the chimney itself. We see two failure patterns here: freeze-thaw spalling on older homes and water intrusion from crown cracks on nearly everything. North Texas winter swings are hard on chimneys. Water gets into hairline cracks, freezes, expands, and each cycle widens the damage. By the time a Celina homeowner notices crumbling brick in the yard or a damp spot near the firebox, the crown usually needs more than a patch.
Crown Repair and Mortar Repointing
The crown is the concrete cap on top of the chimney. When it cracks, water gets behind the brick and starts working its way down. Mortar repointing is removing the deteriorated mortar between bricks and packing in fresh, matched mortar. In Celina’s older ranch homes near the square, we typically repoint the entire chimney and recast the crown. Typical cost: $600 – $1,400 depending on chimney height and access.
Spalling Brick and Tuckpointing
Spalling is when the brick face begins to flake and pop off, usually from trapped moisture. Tuckpointing is the finer cosmetic restoration: cutting out old mortar and installing a thin, contrasting joint line that restores the original look. In Celina’s newer construction, we sometimes see spalling at the chimney’s base where sprinkler overspray hits brick repeatedly. That’s a Celina-specific thing we notice, not something every chimney company flags. Typical spall repair and tuckpointing: $500 – $1,800.
Chimney Cap Installation in Celina
Chimney cap installation in Celina is one of the highest-value repairs a homeowner can make. A cap is the metal cover over the flue opening. It keeps rain, squirrels, birds, and leaves out. It also prevents a spark from escaping and landing on a roof. In Celina, where new subdivisions back up to open fields and older neighborhoods have mature trees near chimneys, caps fail for two reasons: rust-through on older galvanized caps and improper sizing on new builds where the builder used whatever was cheapest at the supply house.
When to Replace a Cap
If you can see daylight through the sheet metal, if the cap has blown off during a storm, or if you hear critters in the flue, the cap needs replacement. We stock stainless steel caps from Copperfield and Famco, sized to your flue, on our trucks serving Celina. Most cap replacements run $250 – $550 including the cap and install. A written quote is delivered before we start.
Cap Sizing and Flue Compatibility
A cap that’s too small chokes the draft. One that’s too large lets rain in at an angle. We measure the flue tile exactly and select a cap that sits properly on the crown. For chimneys with a single clay flue, that’s usually straightforward. For prefab fireplaces common in newer Celina builds, we match the manufacturer’s listing to the cap, using DuraFlex and Olympia Chimney components where the flue needs adapting.
Trusted Brands We Service in Celina
We work with professional-grade chimney materials from trade brands you can verify: DuraFlex for flexible liner systems, Olympia Chimney for liner components and caps, and Copperfield for fabricated caps and chase covers. We don’t buy whatever the supply house has on sale. We specify the material that fits the job and the warranty. Because we service Celina regularly, we keep common cap sizes, liner components, and masonry materials ready for quick turnaround. If your repair requires a specialty part, we quote the lead time in writing before you approve anything.
Common Chimney Repair Problems We See in Celina Homes
- Crown cracking from freeze-thaw cycles. Celina gets enough winter nights below freezing and enough warm days after that water repeatedly gets in, freezes, and expands. This is the most common entry point for the water damage we repair in Celina, and it shows up as cracked brick near the top third of the chimney.
- Flashing failures on new-construction homes. When a builder’s roofer flashes a chimney and a chimney sub performs the crown, the gap where they meet sometimes doesn’t get sealed properly. Water runs behind the brick instead of off the roof. We’ve seen this on Celina homes less than three years old.
- First-degree creosote turning into third-degree tar. Celina homeowners who burn hard through an ice storm can leave a heavy first-degree creosote layer in the flue. Left too long, it glazes into a dark, tar-like coating that a brush won’t remove. That requires chemical treatment or possibly a liner replacement, not just a sweep.
- Chase cover rust on prefab chimneys. The metal chase cover on a prefab chimney is often installed as a thin-gauge piece from the factory. North Texas rain and humidity rust these within a decade. If water drips onto your fireplace from above after rain, the chase cover needs replacement.
Pricing for Chimney Repair in Celina, TX
A standard mortar repointing and crown seal on a single-story Celina ranch runs $600 – $1,400. Spalling brick repair with tuckpointing runs $500 – $1,800 depending on how many bricks need replacement. Chimney cap installation runs $250 – $550. Full chimney rebuilding from the roofline up is rare but occasionally necessary on older downtown Celina homes and typically starts around $2,200. Chimney waterproofing with a vapor-permeable sealant runs $350 – $700. Every job includes a photo report and a written guarantee valid for one full year. Call (830) 251-4560 for a free estimate, and we’ll give you an exact written price before any work begins.
We Also Serve Cities Near Celina
Our crews working in Celina also serve Prosper, Frisco, Pilot Point, and Melissa throughout the week. If you’re near the Collin County line and need Chimney Repair or a full Chimney Repair in Celina inspection, we’ll route the nearest available technician. One phone number covers it all: (830) 251-4560.
Serving Celina, TX - Our Local Coverage Area
We’re based in the Celina area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Celina
Once a year, same as anywhere with a real burning season and a real freeze-thaw cycle. A Level 1 inspection (visual, at the time of your sweep) is enough for most Celina homes that burn seasoned wood and don’t see water signs. A Level 2 inspection is what we recommend if you’ve bought a home, had a chimney fire, or noticed water staining. Call (830) 251-4560 and we’ll walk you through which one fits your situation.
A Level 1 is a visual inspection of the accessible parts when you’re getting a sweep. A Level 2 adds camera work inside the flue and inspection of the attic, crawlspace, and exterior. A Level 3 involves partial demolition when a Level 2 turns up serious damage that can’t be seen otherwise. In Celina, most new-construction homeowners benefit from a Level 2 once after their first burning season, because that’s when builder flashing and crown issues show up.
We can give you a ballpark over the phone for most Celina chimney repairs, and we’ll put the exact price in writing before any work starts. That’s a Garrison Standard requirement, not a courtesy. If the repair turns out to be worse than the camera showed, you approve the new number before we proceed. No surprises at the door. Call (830) 251-4560 for a free estimate.
It happens more often than you’d expect. Builder flashing at the roofline is a common failure point on Celina homes less than five years old. The crown pour and the flashing are done by two different crews, and the seam between them is sometimes left unsealed. If you see water stains on the ceiling near the chimney or dampness inside the firebox after a rain, that’s flashing or crown, and it’s absolutely worth a camera inspection. This is the one repair category where a two-year-old home and a forty-year-old home can need the exact same fix.
If a brush knocks it down to clean tile or stainless, a sweep is all you need. If the creosote is glossy, tar-like, and a brush just skates over it, that’s third-degree glazed creosote. It’s what we see in Celina fireboxes that burned hard through ice storms and were left unserviced. At that point you’re talking chemical treatment or liner replacement, and we’ll show you the camera footage before we recommend either. Call (830) 251-4560 and we’ll give you a straight answer.
One thing about Celina: this city has grown faster than most chimney companies could keep up. You’ve got older ranch homes near the square with original mortar that has seen 40 winters. You’ve got new builds off Preston and around Mustang Lakes that are under builder warranty but still have flashing and crown seams that were never sealed. We’ve worked both. We ran a Level 2 inspection with camera on a house off Preston Road in Celina where the homeowner had never had the chimney looked at since the home was built. The camera showed spalling on the crown and a gap in the flashing where water had been tracking down the smoke chamber. We re-crowned it, sealed the flashing, and sent a photo report of every step before we left. That’s how we work in Celina: you see what we see, you approve what we quote, and you get it in writing. Call (830) 251-4560 for a free estimate.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Celina since 2002.