Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Glendale
Chimney repair in Glendale typically runs $220 – $1,900 depending on what’s damaged, and the first step is always a camera inspection so you can see exactly what you’re paying for. We work throughout Glendale from Adams Hill to Verdugo Woodlands, and every job starts with a written price before any work begins. Chimney Repair from Flint Chimney Sweep means a background-checked technician, a flat quote you approve first, and a repair backed by a written one-year guarantee. Call (830) 251-4560 and Hank Delano’s team will get you on the schedule.
Why Flint Chimney Sweep Is Glendale’s Preferred Chimney Repair Company
We’ve worked on enough 1920s Spanish Revival bungalows around Glendale to know what’s hiding inside the chimney before we even set up the ladder. Our repair techs have run camera inspections on original clay tile liners all over the city, from the hills off Chevy Chase Drive down to the flats near Glendale Community College, so when a homeowner describes spalling brick or a loose cap, we usually know the likely cause already.
Glendale homeowners call us because the price on the invoice is the number we agreed to on the phone. That’s The Garrison Standard, and we put it in writing on every single job. No surprise upcharges at the door. No mystery line items. Hank Delano has been running Flint Chimney Sweep as part of the Garrison Partners family since 2002, and the entire operation is built on one rule: write the scope, write the price, then do the work.
Every repair carries a 365-Day Done Right Promise. If a covered repair fails within a year, we return at no charge. No argument, no re-negotiation. It’s a written guarantee, and we hand you a copy before we leave.
Chimney Cap Replacement in Glendale
Chimney Cap Replacement is one of the most common repairs we handle in Glendale, and it’s the job that prevents most expensive water damage. A missing or rusted cap lets rain straight down into the flue, where it soaks the clay tile liner, drips into the smoke chamber, and eventually rusts the damper and spalls the firebox brick. In Glendale’s housing stock, where many fireplaces date to the 1920s and 30s, that kind of water intrusion moves fast because the original brick is already porous.
Signs your cap is failing
Glendale homeowners usually notice rust streaks running down the chimney chase, or they hear birds inside the flue, or water pools in the firebox after a good rain. Sometimes the old cap simply blows off in Santa Ana wind events and lands in the yard. Any of those means the cap needs to be replaced before the next wet season.
What replacement costs here
A standard stainless steel cap replacement in Glendale runs $220 – $480 installed, depending on flue size and whether we’re replacing a single-flue or multi-flue cap. We stock Famco and Olympia Chimney caps locally, so turnaround is quick, and every cap install includes a written price and the same one-year guarantee as any other repair.
Chimney Liner Installation in Glendale
Chimney Liner Installation in Glendale usually means resurfacing or relining an original clay tile flue that has cracked at the joints. The older bungalows here were built with flues sized for wood fires, and when a homeowner retrofits a gas log set into that original fireplace, the flue is often too small for the new appliance, which creates draft problems, smoke spillage, and a carbon monoxide risk inside the house. A proper liner job fixes the sizing and seals the flue in one pass.
When a liner is actually necessary
We only recommend a new liner or a HeatShield resurfacing when our camera shows open joints, spalling tiles, or a flue that is dangerously undersized for the appliance. If the clay tiles are intact and the flue is properly sized, we say so, and we tell you the chimney can safely wait. Nothing is recommended without photo evidence you can see for yourself in the report we email after the inspection.
Cost and materials for Glendale homes
A HeatShield resurfacing in Glendale typically runs $1,200 – $1,900 depending on flue height and the number of joints needing sealant. A full stainless reline with DuraFlex or Copperfield product runs higher when the original clay is completely failed, and we quote that out flat before any work starts so you can see the exact number in writing. Every liner job is inspected with the camera after installation, and the before-and-after photos are included in your report.
Trusted Brands We Service in Glendale
We work with professional-grade chimney products from Famco, Olympia Chimney, and DuraFlex, and we specify them by job, not by margin. That means when you need a replacement cap in Glendale, we’re pulling a Famco stainless cap that fits your flue size, not whatever is cheapest on the truck. We keep common stock available locally with fast turnaround, so most repairs are completed in a single visit. Chimney Repair in Glendale from Flint means real materials from named manufacturers, installed by a uniformed tech and backed in writing.
Common Chimney Repair Problems We See in Glendale Homes
- Cracked clay tile flue liners in 1920s – 40s bungalows. The original tiles shift at the joints over decades, letting creosote and heat reach the surrounding brick. A Level 2 camera inspection catches this before it becomes a chimney fire.
- Undersized flues from gas log retrofits. Old wood-burning fireplaces fitted with gas log sets often have flues that are too small for clean venting, causing smoke spillage and carbon monoxide backup rather than a clean burn.
- Cracked chimney crowns and loose flashing. Earthquake-era masonry chimneys across Glendale frequently show separation where the crown meets the flue and where flashing meets the roofline, allowing water intrusion that spalls firebox brick and rusts the damper.
- Spalling brick in the firebox near the damper. Years of water entry and heat cycles break the brick face apart, and once spalling starts, it accelerates. This is usually a repointing or partial rebuild job, and we quote it after the camera shows us the full extent.
Pricing for Chimney Repair in Glendale, CA
A standard chimney cap replacement in Glendale runs $220 – $480. Mortar repointing on a typical residential chimney runs $600 – $1,400. A HeatShield flue resurfacing runs $1,200 – $1,900, and a partial chimney rebuild above the roofline starts around $1,600 and goes up with height and brick access. Flashing repair around the chimney base runs $350 – $750. The number that matters is the one on your written quote, and you get that before we schedule any work. Call (830) 251-4560 for a free estimate, and we will walk you through exactly what your chimney needs and what it costs in Glendale.
We Also Serve Cities Near Glendale
Flint Chimney Sweep sends the same background-checked, uniformed technicians to Burbank, West Hollywood, Altadena, and Pasadena. If you’re just outside Glendale, we likely already have a crew scheduled near you, and every job in every city runs on the same written-price, one-year-guarantee standard. Call us and we’ll confirm your area.
Serving Glendale, CA - Our Local Coverage Area
We’re based in the Glendale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Glendale
Once a year, and if you burn regularly in an older Glendale home, twice a year is not unreasonable. The clay tile flues in 1920s – 40s bungalows collect creosote at the joints faster than stainless-lined flues do, and our camera inspections routinely find second-degree glazing in chimneys that looked clean from the firebox. A yearly Level 2 inspection with photo report catches joint failure early, while the fix is still a resurfacing and not a rebuild. Call (830) 251-4560 and we’ll get your Glendale chimney on the inspection calendar.
First, we run a Level 2 camera inspection to document what’s wrong, then we write a flat price for the repair, and only after you approve it do we schedule the work. For a cap replacement, the repair is a single visit with the new cap installed and sealed. For a liner resurfacing, the work takes a day or two and we re-inspect the flue with the camera before we call it done. Every Glendale repair includes a photo report and a written one-year guarantee.
Yes. That is exactly what our inspection is for. We run the camera up the flue, check the firebox, the damper, the crown, the flashing, and the cap, then we tell you plainly whether it is safe to light a fire, safe with specific repairs, or should not be used until further work is done. We are not going to recommend a rebuild when a repointing will do, and we will tell you when it can wait safely until next season. Call (830) 251-4560 to book the inspection.
First-degree creosote is a light sooty dust that brushes off easily. Third-degree creosote is a hard, glossy glazing that forms when flue temperatures are low and the smoke condenses heavily, common in older Glendale chimneys with cold, oversized flues. Third-degree glazing is a chimney fire risk and cannot be removed with a standard brush; it requires chemical treatment or mechanical removal. If our camera shows third-degree glaze in your Glendale flue, we will say so directly and quote the correct removal process.
Yes, and often more urgently than a wood-burning fireplace. Gas log sets in original 1920s – 40s Glendale flues are frequently undersized, which means the flue cannot vent combustion gases fast enough, and that is a carbon monoxide risk inside the house. We run the same camera inspection and check the flue sizing, the joints, and the cap, then tell you whether the liner needs resurfacing or replacement to be safe. Get a free estimate by calling (830) 251-4560.
One More Thing About Chimney Repair in Glendale
Glendale’s housing stock is full of Spanish Revival and Craftsman bungalows from the 1920s through the 1940s, and those original brick chimneys were built tight against the roofline with clay tile flues that were never meant to last a century. The joints crack, the tiles shift, and when a gas log set gets dropped into that old firebox, the whole system is suddenly doing a job it was never sized for. We were called to a 1928 Spanish Revival bungalow in the Adams Hill area where the homeowner had never had the chimney looked at, and the firebox showed spalling brick near the damper. Our tech ran a Level 2 inspection with a camera, found the original clay tile flue liner had open joints and moderate second-degree creosote glazing, and we quoted a HeatShield resurfacing plus a new stainless cap and a damper repair. Flat price agreed before booking. Photo report emailed with before-and-after shots of the flue and smoke chamber. That is how every job goes.
If your chimney is doing anything that worries you, call (830) 251-4560. We’ll send a uniformed, background-checked technician to your Glendale home, put the problem on camera, and give you a written price before any tool comes off the truck. If the chimney is fine, we’ll tell you that too, and you’ll have the photo report to prove it.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Glendale since 2002.