Chimney Repair in Houston - Inspected on Camera, Then Priced in Writing

Fast, Reliable Chimney Repair Across Houston

Chimney repair in Houston usually means fixing water damage, not fire damage. The city’s humidity and wind-driven rain put constant pressure on flashings, crowns, and mortar joints. A standard flashing repair runs $350 – $650, while crown repair typically costs $450 – $900 depending on the extent of cracking. We serve homeowners from Bellaire to Kingwood and everywhere between. If your chimney is leaking, rusting, or shedding mortar, call Flint Chimney Sweep at (830) 251-4560 and we’ll give you a written price before any work begins.

Call (830) 251-4560

Why Flint Chimney Sweep Is Houston’s Preferred Chimney Repair Company

Houston homeowners call us because we put the price in writing before a single tool comes off the truck. That means the number you approve is the number on the invoice. No “discoveries” that double the bill after the work starts. Our technicians are background-checked and uniformed, so you know exactly who’s walking through your door. We’ve been part of the Garrison Partners family of chimney service companies since 2002, operating under the same standard every location follows: documented commitments, not verbal promises.

We also know Houston’s housing stock. The brick chimneys in neighborhoods like West University Place and the Heights tend to be older, with lime mortar that breaks down faster in humid air. The newer builds in Cypress and Pearland often have prefab chimneys with different failure points, usually at the flashing and chase cover. Our Chimney Repair team sees both every week, and we stock common Houston-specific parts instead of ordering everything from a warehouse. That means shorter turnaround on repairs in a city where a leaking chimney can’t wait through a wet week.

Every repair we perform carries our 365-Day Done Right Promise in writing. If a covered repair fails within one full year, we return at no charge. No argument, no re-quote, no fine print. That’s the Garrison Standard, and it’s been our operating code since day one.

Chimney Flashing Repair in Houston

Chimney Flashing Repair in Houston is the most common repair we perform, and for good reason. Flashing is the metal barrier where the chimney meets the roofline, and Houston’s hurricane-season wind-driven rain finds every gap in it. When flashing fails, water runs down the chimney chase, into the attic, and along the firebox. The first sign is usually a water stain on the ceiling near the fireplace or a musty smell in the room. A flashing repair in Houston typically runs $350 – $650, depending on whether we’re replacing a section or the full perimeter.

What the Job Involves

We don’t caulk over old flashing and call it fixed. We remove the damaged section, inspect the substrate underneath, install new flashing with the correct overlap, and seal it with a professional-grade sealant. If the old flashing was installed wrong, which we see often in homes built during Houston’s 1990s construction boom, we correct the pitch so water always sheds away from the chimney instead of pooling against it.

When to Repair vs. Replace

If the flashing is pulling away from the brick or shows visible gaps, replacement is usually the right call. Patching works only when the metal itself is sound and the issue is localized sealant failure. We’ll show you photos from the roof before you agree to anything. No guesswork, no pressure.

Chimney Crown Repair in Houston

Chimney Crown Repair in Houston addresses the concrete slab that caps the top of the chimney. This crown takes direct hits from Houston’s heat, humidity, and storm cycles. Hairline cracks open up, water gets in, and freeze-thaw cycles aren’t even the main culprit here; it’s simple thermal expansion. Houston’s summer sun bakes the crown, then a sudden downpour cools it fast. That cycle repeats weekly in the wet season. A crown repair in Houston typically costs $450 – $900, and the earlier it’s caught, the cheaper it is.

Hairline Cracks to Full Resurfacing

Small cracks can often be repaired with a flexible crown sealant that moves with the concrete instead of splitting again. If the crown has spalled, meaning the concrete surface has broken away in chunks, we resurface it with a proper crown mix that sheds water. In Bellaire, a homeowner booked a chimney cleaning after noticing a musty smell in the living room; our technician found the firebox full of crumbling mortar and the chimney crown cracked from last summer’s storms. We repaired the crown and added a stainless cap, then showed the homeowner a photo report confirming the flue liner and smoke chamber were sound. No sweep was needed, and we told them to book a Level 1 inspection next year, no same-day service promise, just a flat price agreed before we arrived.

Why a Cap Goes With It

We almost always recommend a stainless cap when repairing a crown in Houston. The cap keeps rain and the city’s abundant bird population out of the flue, and it extends the life of the crown by reducing water pooling on top. It’s an add-on, not a required upsell. We’ll show you why it makes sense for your specific chimney and let you decide.

Trusted Brands We Service in Houston

We work with professional-grade chimney products from brands like Olympia Chimney, Copperfield, and DuraFlex. When we resleeve a flue in a Houston home, we specify the liner based on the appliance type and fuel, not on what’s on the truck. We keep common DuraFlex liner components and Copperfield caps in our Houston stock, so repair schedules don’t stall waiting on a distributor. If your chimney has a specific manufacturer’s system in place, we’ll work within that system rather than Frankensteining mismatched parts. That’s how we keep our written guarantee honest; the materials have to perform as a unit for a full year in Houston’s humidity, and these brands do.

Common Chimney Repair Problems We See in Houston Homes

• Flashing rust-through from constant humidity. Houston’s average relative humidity runs near 75% most of the year, and galvanized flashing from older homes rusts from the underside first. By the time you see rust streaks on the brick, the flashing is usually too thin to save.
• Spalled firebox brick from water intrusion. When a crown crack lets rainwater into the chimney, the water absorbs into the firebrick. Houston’s heat then expands it and pops the surface off. This looks like flaking brick inside the firebox and means the water path needs to be fixed before repointing the damage.
• Rusted dampers from storm-driven humidity. Houston’s wet season pushes humid air through uncapped chimneys for months at a time. Cast-iron dampers rust open or shut. We replace them with stainless or cast alternatives designed for coastal humidity, not the cheap steel plate versions that fail in two years.
• Crushed or separated flue liners in homes near the Ship Channel. Older clay tile liners in neighborhoods like Galena Park and Pasadena shift with the region’s clay soil movement. The tiles crack or separate, allowing heat and exhaust to reach the masonry. A camera inspection shows exactly where the separation is so we’re not relining the whole chimney when only a section needs it.

Pricing for Chimney Repair in Houston, TX

We Also Serve Cities Near Houston

Flint Chimney Sweep serves the full Houston metro from Galena Park and Pasadena to Channelview and South Houston. If your chimney is leaking in one of these nearby cities, the same written pricing and one-year guarantee apply. We cover Houston neighborhoods including Bellaire, Meyerland, the Heights, Kingwood, and Clear Lake, plus everything in between. Call us and we’ll tell you exactly when we can be there, with a price in hand before we arrive.

FAQs About Chimney Repair in Houston