Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Hull
Chimney repair in Hull, MA typically runs $340 – $1,850 depending on whether you need crown work, repointing, flashing, or a partial rebuild, and most jobs take one to two days once we’re on site. We dispatch crews from our Boston office to Hull weekly, and we’ve spent enough time working along Nantasket Avenue, Atlantic Avenue, and the cottages off Spring Street to know exactly what salt air does to masonry. That local knowledge changes what we look for, what we recommend, and what we tell you can safely wait. Call (830) 251-4560 for a written quote before any work starts.
Why Flint Chimney Sweep Is Hull’s Preferred Chimney Repair Company
Hank Delano leads our repair crews, and his rule is simple: no tool comes off the truck until the homeowner has a written price and a written scope of work. That’s The Garrison Standard, the same code every Garrison Partners location follows, and it means the invoice you get at the end is the number you approved at the beginning. Hull homeowners have told us they’ve been burned by companies that moved the price at the door or pushed a $6,000 liner they never proved was needed. We don’t work that way.
Every repair we do in Hull carries our 365-Day Done Right Promise in writing. If a covered repair fails within one full year, we return and fix it at no charge. No argument, no re-booking fee, no fine print. We’ve held that standard since 2002, and it’s why Hull customers keep our number in their phones.
Our technicians are background-checked and uniformed. You’ll know exactly who’s walking through the door, and a live person answers our phone 24/7. No voicemail tree, no callback form. Call (830) 251-4560 and a real person picks up.
Chimney Crown Repair in Hull
Chimney Crown Repair in Hull is, far and away, the most common repair we do on this peninsula. The crown is the concrete slab at the very top of the chimney that sheds rain off the masonry. In Hull, it takes a beating: salt-laden onshore wind, driving rain from nor’easters, and freeze-thaw cycles that open hairline cracks into full fractures. Once water gets through the crown, it travels down into the brick and freezes there in winter. That’s how you get spalling, the flaking and popping of brick faces that turns a $400 crown repair into a $1,500 rebuild if it’s left a season too long.
A crown repair in Hull typically runs $340 – $680 depending on the extent of cracking and whether we need to remove and re-pour the full crown or can patch with a proper crown coat. We don’t caulk it with roof sealant from a tube. We build a proper form, pour a real crown mix, and tool it for drainage so water doesn’t pond on top.
Signs a Hull homeowner should watch for
Look at the top of your chimney from the yard. If you see a white-gray stain running down the brick, the crown is cracked and water is already moving through it. If you see flakes of brick on your roof or in your gutter, spalling has started. Neither fixes itself, and both get meaningfully more expensive the longer they go.
Why crowns fail faster near the water
Hull’s position as a coastal peninsula means airborne salt rides every onshore breeze and settles into the crown’s surface pores. When rain follows, the salt pulls moisture deeper into the concrete. Then January freezes it. Crowns that would last 20 years inland often need attention in 10 to 12 years here. We inspect them with every sweep so you know exactly where you stand.
Chimney Repair Companies in Hull
Chimney Repair Companies in Hull fall into two camps: those that treat every chimney like a creosote problem and those, like us, that recognize this town’s chimneys usually fail from water and weather first. Hull’s housing stock runs heavily to older bungalows, beach cottages, and converted summer homes along the shore, many with masonry chimneys that have faced decades of salt spray. A company that only brushes flues will miss what’s actually wrong. Our team starts every repair call with a camera inspection so you see the problem yourself, not just hear about it.
We’re part of the Garrison Partners family of independently owned chimney service companies, founded in 2002, and we’ve been chasing salt-air masonry failures on the South Shore long enough to know the difference between a draft problem and a crown problem. That matters when the answer is the difference between a $98 sweep and a $1,200 rebuilding job. We’ll never tell you to spend on work our own camera shows you don’t need.
What a Hull repair call actually involves
We show up inside the window we gave you. We run a Level 1 or Level 2 inspection depending on what we find, and the camera report is yours to keep, with photos timed and dated. You get a written price before any work begins. If the scope changes once we open something up, the new price is written down and approved before we continue. No phone call surprises.
When you don’t need us yet
Some findings can wait. A thin glaze of creosote is normal. A small chip in the crown’s edge is not urgent if the masonry below is sound. We’ll tell you that plainly, write it in the report, and note when to check back. The point isn’t to sell you a repair. It’s to give you a straight answer.
Trusted Brands We Service in Hull
When we do repair work in Hull, we specify materials by the job, not by our margin. That means DuraFlex liners where a liner is genuinely needed, Olympia Chimney caps and dampers where the spec calls for them, and Famco copper flashing where a coastal chimney meets a steep roof. We keep common Hull repair parts in stock at our metro location, so turns stay fast even when the weather’s good and everyone on the peninsula is booking at once. You can verify the quality of every brand we install on your own time, which is exactly the point.
Common Chimney Repair Problems We See in Hull Homes
- Crown and cap failure from salt air and freeze-thaw. The crown cracks, water gets in, and spalling brick follows. Left a season, the repair becomes a rebuild. This is the single most common issue on the peninsula.
- Flashing pulled loose along steep coastal roof pitches. Rain tracks the smoke chamber instead of the flue, and homeowners blame the chimney when the actual leak is the roof joint. Wind off the bay works flashing steadily loose.
- Draft problems misdiagnosed as a dirty flue. When the real cause is a cracked crown or a cap missing its spark screen, brushing the flue does nothing. The carbon monoxide risk stays even though the chimney looks cleaner.
- Rust staining on the firebox floor. That’s the classic signature of water coming down the flue past a failed cap. We see it constantly in homes along Nantasket Beach and up toward Kenberma.
Pricing for Chimney Repair in Hull, MA
Here’s what you’re actually looking at in Hull. Mortar repointing runs $22 – $38 per square foot. A full chimney crown repair runs $340 – $680. Flashing repair around the base runs $390 – $820 depending on the roof pitch and how much copper or aluminum has to be replaced. Spalling brick repair runs $45 – $75 per brick. A partial chimney rebuild above the roofline runs $1,100 – $1,850. Full rebuilds with structural brick run higher and are quoted from the camera report. Every quote is written before work starts, so you’ll know your number to the penny. Call (830) 251-4560 for a free estimate.
We Also Serve Cities Near Hull
Our crews work across the South Shore, and we make the same written-price commitment in every town. See our Chimney Repair service page for the full scope of what we do, and if you’re in Hull or nearby, we cover Hingham, North Scituate, Quincy, and Scituate weekly.
Serving Hull, MA - Our Local Coverage Area
We’re based in the Hull area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Hull
Once a year, and the reason in Hull is the salt air, not the creosote. A chimney that sees occasional use still faces constant onshore wind, rain, and freeze-thaw cycles, and those attacks don’t care whether you burned one fire or forty. An annual inspection with a camera catches a cracked crown or failing flashing while it’s still a repair, not a rebuild. Call (830) 251-4560 to schedule yours, and we’ll put the findings and photos in your hands the same day.
Yes, and here’s why. If water is coming down the flue or through the masonry, the source is almost always crown failure, cap failure, or flashing failure, none of which have anything to do with burning wood. You still need repair because the water is degrading the brick and mortar, and in a Hull freeze-thaw climate, one winter can turn small cracks into structural spalling. We’ll show you the exact entry point on camera before we recommend a dollar of work. Call (830) 251-4560 for that inspection.
No, a standard brush cannot remove third-degree creosote. Third-degree creosote is the hard, glazed, tar-like buildup that forms from long, slow-burning fires or burning green wood, and sweeping alone just polishes it. Removing it requires chemical treatment or mechanical rotary methods, and in steel liners it can require replacement. Our camera inspection tells us which grade you’re dealing with before we touch anything, so you won’t pay for a sweep that doesn’t solve the problem.
Repair work in Hull runs $340 – $1,850 for most jobs: crowns $340 – $680, flashing $390 – $820, repointing $22 – $38 per square foot, partial rebuilds $1,100 – $1,850. You get a written price before any work starts, and payment is collected when the job is complete and you’ve walked it with us. We don’t take deposits, and we don’t ask for a card before we’ve done the work.
We do not promise same-day dispatch, because a repair job is not a fire call. What we will do is book your visit for the earliest slot our Hull schedule allows, arrive inside the window we give you, and complete the inspection and written quote that day. If the damage is severe enough that burning is unsafe, we’ll tell you plainly and help you stop using the fireplace until the repair is done. The urgency here is seasonal, before burning season, not hourly.
If your Hull chimney has been leaking, spalling, or just hasn’t been looked at in years, call Flint Chimney Sweep at (830) 251-4560. We’ll give you a written price, a camera-backed answer, and a straight recommendation on what needs doing now and what can wait.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Hull, MA and the South Shore.