Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Kirkland
Chimney repair in Kirkland typically costs $240 – $780 for common jobs like crown repair, flashing replacement, and mortar repointing, and most work is completed in a single visit. Flint Chimney Sweep serves the entire Kirkland area, from the lakefront streets near downtown to the subdivisions east of I-405 and up through Juanita, Houghton, and Bridle Trails. We show up with a written price before any tool leaves the truck, and our repair work carries a one-year guarantee. Call (830) 251-4560 to schedule a chimney inspection or repair evaluation.
Why Flint Chimney Sweep Is Kirkland’s Preferred Chimney Repair Company
Kirkland homeowners call us because we put the price in writing before work starts. That matters in this city, where two houses on the same block can have completely different chimney systems: a 1940s brick masonry chimney on a lakefront cottage and a factory-built flue liner in a 1990s eastside build. We have worked on both, often in the same week, and the repair path is rarely interchangeable. Our team is led by Hank Delano, a background-checked technician who has spent years diagnosing Kirkland’s masonry and prefab flue failures.
We are part of Garrison Partners, the chimney service network founded in 2002, and we operate under the Garrison Standard: a written scope, a written price, and a written 365-Day Done Right Promise on every repair. Kirkland customers tell us the difference is audible over the phone. A live person answers at (830) 251-4560, 24 hours a day, not a voicemail tree.
Our Chimney Repair team has handled everything from hairline crown cracks on mid-century brick chimneys to failed factory-built liner joints on newer builds near Bridle Trails. We do not guess, and we do not recommend work a homeowner cannot verify. Every inspection includes a camera run and a photo report.
Chimney Crown Repair in Kirkland
Chimney Crown Repair in Kirkland addresses the concrete or mortar slab that caps the top of a masonry chimney, and it typically runs $350 – $650 depending on whether we are filling a hairline crack or rebuilding the crown entirely. A cracked crown lets rainwater seep into the chimney structure, and in Kirkland’s wet winters that water freezes and thaws through the brick, causing spalling and internal damage that gets worse each season. Most Kirkland homeowners never see the crack because it is invisible from the ground.
Signs Your Crown Needs Repair in Kirkland
Water stains on the ceiling near the fireplace or white efflorescence on the exterior brick are the usual giveaways. A camera inspection confirms it. In Bridle Trails and the Market Street area, where many chimneys date to the 1940s and 1950s, our crews frequently find original crowns with no drip edge and surface cracking that has been letting water in for years.
How We Fix a Crown in Kirkland
We remove cracked or deteriorated material and recast the crown with a proper bond break and drip edge so water sheds away from the flue. The work usually takes a few hours. We re-capped a 1948 brick cottage off Market Street where the crown crack was visible from the ground, then sealed the flashing where it had pulled away from the brick. That repair stopped the water intrusion without touching the flue itself.
Chimney Repair Companies in Kirkland
Chimney Repair Companies in Kirkland are not all the same, and the difference shows up in how a company quotes the job. Many Kirkland homeowners tell us they have been burned by a lowball phone estimate that ballooned once a technician arrived. We do not work that way. Every job Flint Chimney Sweep books in Kirkland gets a written price before any work starts, and the number on the invoice is the number you approved. That is the Garrison Standard, without exception.
What to Expect When You Call Flint in Kirkland
You get a live person. You describe what you are seeing, and we tell you honestly whether it needs an inspection or can wait. If we come out, you get a flat-price chimney sweep or inspection agreed to before booking, plus a camera inspection and a photo report included. No upselling at the door.
Why Kirkland Homeowners Choose Flint Over Other Chimney Repair Companies
The 365-Day Done Right Promise covers every repair for a full year, and if a covered repair fails within that year we return at no charge. No argument. That guarantee is written into every Kirkland job we perform. Read more about how we serve Chimney Repair in Kirkland and the surrounding metro.
Trusted Brands We Service in Kirkland
We stock and install professional-grade chimney materials from brands homeowners can verify independently. On Kirkland jobs we regularly work with HeatShield resurfacing products for flue repair, Gelco for waterproofing and crown coat systems, and Olympia Chimney for caps and top-sealing dampers. When a Kirkland homeowner has a factory-built flue, we identify the specific liner brand before recommending anything. A failed joint or a bad top plate is a different repair than a full liner replacement. We tell you which one you actually need, with the photo evidence to prove it.
Common Chimney Repair Problems We See in Kirkland Homes
- Hairline crown cracks on mid-century brick chimneys. Water gets in through the crack, freezes in Kirkland’s cold snaps, and turns into spalling brick on the firebox and flue liner. Most homeowners only catch it because we run a camera on every visit.
- Missing or rusted-out chimney caps on older Bridle Trails and Market Street homes. This is how rain, squirrels, and nesting birds get into the flue. A homeowner who books a basic sweep is often surprised to learn raccoons have been bedding down in the smoke chamber.
- Failed joints and top plates on factory-built flue liner systems in 1980s and 1990s eastside subdivisions. These get quoted for full replacement when the actual failure is a single bad joint. We check the liner brand and condition before recommending anything.
- Third-degree creosote glaze in smoke chambers of homes that burn green or unseasoned wood. A brush will not remove it, and we say so up front rather than selling a sweep that will not fix the actual problem.
Pricing for Chimney Repair in Kirkland, WA
Here are the numbers we give Kirkland homeowners before we book anything. A standard chimney sweep in Kirkland runs $180 – $260. A same-visit crown repair runs $350 – $650. Flashing repair typically runs $400 – $750. Mortar repointing or tuckpointing runs $45 – $75 per square foot of damaged masonry. A full chimney rebuild starts around $2,800, and we will tell you if that is actually necessary or if a less invasive repair will hold. Call (830) 251-4560 for an exact quote. Estimates are free, and the price we quote is the price you pay.
We Also Serve Cities Near Kirkland
Flint Chimney Sweep also serves Redmond, Medina, Bellevue, and Bothell. Kirkland remains our primary service area, and scheduling is coordinated from the brand’s Seattle office, with crews dispatched locally to Kirkland. Call (830) 251-4560 to book in any of these nearby cities.
Serving Kirkland, WA - Our Local Coverage Area
We’re based in the Kirkland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Kirkland
Every year, if you burn wood regularly. Kirkland’s wet climate compounds chimney problems because water intrusion through crown cracks and flashing gaps accelerates masonry damage faster than in drier regions. An annual inspection takes about an hour and catches crown cracks and flashing issues before they become expensive rebuilds. Call (830) 251-4560 to schedule.
We sweep the flue, then run a camera from the firebox to the crown and photograph everything. You get the photo report the same day. We point out what needs repair now, what can wait, and what is fine. No pressure, no mystery. If you are in Juanita, Houghton, or Finn Hill, the process is identical.
No. We can often narrow it down based on what you describe, but a camera inspection is the only way to confirm whether a crown crack is superficial or structural. Anyone who quotes a chimney repair over the phone without looking at the flue is guessing. We would rather be honest about that.
No. Soot is powdery and brushes out easily. Creosote is a hard, tar-like glaze that forms when unseasoned or green wood burns at low temperatures, and third-degree creosote cannot be removed with a brush. If we find glaze in a Kirkland smoke chamber, we say so plainly and recommend the right treatment. A sweep in that condition is wasted money.
Minor spalling on the exterior brick can often wait, provided the crown and flashing are intact and no water is getting in. We will tell you when that is the case and put it in writing. But a cracked crown, failed flashing, or a missing cap should not wait through another Kirkland winter. Call (830) 251-4560 and we will give you a straight answer and a written quote.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Kirkland since 2002.