Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Pflugerville
Chimney repair in Pflugerville usually means one of two things: a cracked crown letting water into the smoke chamber, or a rusted cap that stopped doing its job years ago. Most repairs run $350 – $1,800 depending on what the camera finds, and we’ll put that number in writing before any work starts. We serve every Pflugerville subdivision from Falcon Pointe to Highland Park to the older streets off FM 685. If you’re seeing water stains on the ceiling near the fireplace or brick faces flaking onto the roof, call (830) 251-4560 and we’ll get a background-checked tech out to look at it.
Why Flint Chimney Sweep Is Pflugerville’s Preferred Chimney Repair Company
We’ve been under the same Garrison Standard since 2002, and Pflugerville homeowners tend to hear about us the way most trade work actually spreads: a neighbor gets a written price, watches the job get done, and passes the number along. Hank Delano runs our crews the same way on every call. Uniformed tech, price on paper before tools come off the truck, and a camera report you keep. No exceptions.
Our Chimney Repair team works Pflugerville regularly enough to know which 1990s and 2000s subdivisions have builder-grade caps that fail early, and which older streets have masonry that’s held up but needs joint work. The 365-Day Done Right Promise covers every repair we make in Pflugerville for a full year. If a covered repair fails, we come back free. That’s the whole point of putting it in writing.
Chimney Cap Replacement in Pflugerville
Chimney Cap Replacement in Pflugerville typically runs $350 – $650 for a stainless cap sized to your flue, installed with a new crown seal. Most Pflugerville homes we see still have the original galvanized cap from the builder, and on a 20-year-old house that cap is usually rusted through at the corners or missing entirely. The cap keeps rain, birds, and squirrels out of the flue. Without it, water pools at the smoke shelf and slowly eats the damper and firebox brick.
When the cap has failed
Rust stains on the chimney chase, nesting material in the flue, or a cap that wobbles when you test it from a ladder. If the damper plate is seized or the firebox faces are spalling, the cap failed a while ago and water has been working downward. We see this pattern constantly in Falcon Pointe and the neighborhoods off Kelly Lane.
What replacement actually involves
We pull the old cap, inspect the crown underneath, and if the crown is cracked we address that before seating the new cap. Stainless caps from Copperfield and Famco hold up far better than builder sheet metal. You get before and after photos in the same report we use on every job.
Chimney Liner Installation in Pflugerville
Chimney Liner Installation in Pflugerville runs $2,200 – $4,800 for a full reline, depending on flue height and whether we’re dropping a rigid or flexible liner. But here’s what matters for Pflugerville specifically: we don’t recommend a full reline unless the camera shows the existing flue tiles are actually cracked or separated. In this area, the clay soil movement cracks the exterior masonry faster than it damages the liner. A lot of liners we inspect are still sound and only need a HeatShield resurfacing, which runs far less.
When a liner is actually done
The camera shows gaps between flue tiles, missing mortar joints, or a breach into the chimney cavity. That’s when combustion gases can leak into the house or the chimney chase. We recommend HeatShield or DuraFlex systems for Pflugerville homes based on what the camera shows, not what costs more.
When it can wait
Surface spalling on the firebox brick or a sticky damper usually doesn’t mean the liner is shot. We’ll tell you straight if the flue is safe to burn and what to monitor. That’s the entire reason we run a camera on every job.
Trusted Brands We Service in Pflugerville
We stock and install professional-grade chimney products from Copperfield, HeatShield, DuraFlex, and Famco, and we specify by the job rather than by margin. That means if your Pflugerville chimney needs a stainless cap, we pick the one sized to your flue and the exposure on your roof. If it needs a liner repair, we use the HeatShield system when the camera shows the existing tiles can be saved. We keep common Pflugerville sizes on the truck so most cap and crown work doesn’t wait on parts.
Common Chimney Repair Problems We See in Pflugerville Homes
- Cracked chimney crowns. Pflugerville sits on expansive blackland clay that swells and shrinks with every drought-to-wet cycle. That movement opens crown cracks that let water into the smoke chamber, which is why we see more crown repair here than flue repair.
- Rusted builder-grade caps. Homes built in the 1990s and 2000s across Pflugerville often have galvanized caps that corrode at the seams within 15 years. Once the cap fails, rain and animals get straight into the flue.
- Pulled flashing seams. The same soil movement that cracks the crown also works on the flashing at the roofline. Seams open, water follows, and the ceiling near the fireplace shows it first.
- Spalling firebox brick. When water sits in the smoke chamber and firebox, the brick faces flake off. It looks like cosmetic wear but it’s a moisture problem, and in Pflugerville it’s almost always traceable to a failed cap or cracked crown.
Pricing for Chimney Repair in Pflugerville, TX
Cap replacement runs $350 – $650. Crown repair runs $400 – $900. Mortar repointing and tuckpointing runs $40 – $60 per square foot. Full liner installation runs $2,200 – $4,800, and HeatShield resurfacing lands between $1,800 and $3,200. What moves the number in Pflugerville is access: a two-story chimney with a steep pitch costs more to work safely than a single-story ranch off FM 1825. Every quote is written before work starts, and the number on the estimate is the number on the invoice. Call (830) 251-4560 and we’ll schedule a flat-price sweep and camera inspection first, so you’re looking at an exact recommendation, not a guess.
We Also Serve Cities Near Pflugerville
Our crews run regular routes through Pflugerville and the surrounding area. We also cover Round Rock, Hutto, Manor, and Austin with the same written-price guarantee and 365-Day Done Right Promise. If you’re just outside Pflugerville, call and we’ll tell you which day we’re working your area.
Serving Pflugerville, TX - Our Local Coverage Area
We’re based in the Pflugerville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Pflugerville
Once a year is the safe answer, but it depends on what you burn and how the flue looks on camera. If you burn dry hardwood and the camera shows light soot and no creosote glaze, you can stretch to every other year. If you burn pine or construction scraps, or the flue shows heavy buildup, sweep before the next burn. The camera tells us which camp you’re in so you’re not paying for a sweep you don’t need. Call (830) 251-4560 and we’ll put eyes on it.
If the crack is hairline and you’re not seeing water stains inside, it can usually wait a few months. But Pflugerville’s blackland clay keeps moving with every rain and dry spell, so a crack that’s hairline in October can open by spring. The thing to watch is moisture on the ceiling near the fireplace or a musty smell after rain. If you see either, don’t wait. We’ll tell you straight after a camera inspection whether it’s monitor-and-wait or patch-and-seal now.
Not always. Third-degree creosote is a hard, shiny glaze that can’t be brushed out, but if the flue tiles underneath are intact and the joints are tight, a chemical treatment or rod-and-scrape removal may be enough. The camera decides. If the tiles are cracked or separated behind that glaze, that’s when a liner is the honest fix. We don’t quote a reline without showing you the footage.
We’re looking at flue tile condition, mortar joints, and anywhere the liner has shifted. From the ground you can see a cracked crown or a missing cap. You can’t see a separated flue joint 12 feet down, a breach into the chimney chase, or glaze buildup in the upper third of the flue. The camera shows all of it, and you get the photos in your report. That’s the only way to know if a repair is needed or if it can wait.
Flaking brick is spalling, and in Pflugerville it almost always traces back to water getting in through a failed cap or cracked crown. It’s not normal wear. A sticky damper usually means rust from that same water. Both are repairable, and the fix starts with stopping the water, then addressing the damaged brick. Get the camera on it before you light another fire. Call (830) 251-4560 and we’ll look at it for free.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Pflugerville since 2002.