Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Santa Rosa
Chimney repair in Santa Rosa typically runs $250 – $950 for cap replacement and $1,800 – $3,600 for a full flue liner install, and we give you a written price before any work starts. We dispatch background-checked, uniformed technicians from the San Francisco Bay Area office to every Santa Rosa zip code, including Coffey Park, Bennett Valley, and Rincon Valley. You get a flat number on paper before we touch anything, and every repair carries our 365-Day Done Right Promise in writing. Call (830) 251-4560 for a free estimate and a straight answer on what your chimney actually needs.
Santa Rosa’s housing stock is unlike most cities in Sonoma County. A single street can have a 1906 rebuild with a brick chimney next to a mid-century ranch with a terracotta flue next to a 2018 Tubbs-fire rebuild with a factory-built unit. That means the repair scope and inspection level change house to house. We know that because we see it every week. We’re Flint Chimney Sweep, part of the Garrison Partners family, and we’ve operated under The Garrison Standard since 2002: documented price, documented scope, documented guarantee. We also maintain our full Chimney Repair hub for homeowners who want to understand the broader service range.
Why Flint Chimney Sweep Is Santa Rosa’s Chimney Repair Team
Santa Rosa homeowners have told us the same story for years: a company books a sweep, finds “extensive damage,” and presents a number that doubled since the phone call. That doesn’t happen with us. Our owner, Hank Delano, built Flint Chimney Sweep on a simple rule: the price you approve before we start is the price on the invoice. No exceptions. That applies to mortar repointing off Highway 12, a cap replacement in Roseland, or a full liner install near Spring Lake.
The 365-Day Done Right Promise is what separates us from every other chimney company serving Santa Rosa. If a covered repair fails within one full year from the service date, we return and fix it at no charge. No argument, no re-billing, no fine print. That guarantee is written on every repair invoice. Santa Rosa customers also get a live person on the phone 24 hours a day, seven days a week. Not a voicemail tree, not a callback form. A person. At 3 a.m. in December when water is dripping through the firebox, that matters.
We also dispatch uniformly. When you book with Flint Chimney Sweep, you know exactly who is walking through your door: a background-checked technician in company uniform, carrying the camera inspection equipment to show you what’s actually going on inside the flue. Every job includes a photo report. Every recommendation is tied to a picture you can see yourself.
Chimney Cap Replacement in Santa Rosa
Chimney cap replacement in Santa Rosa falls between $250 and $950, and it’s the single most common repair we perform after a wet winter. The cap is the metal lid at the top of the flue. It keeps rain, birds, leaves, and backdrafts out. When a cap rusts through or blows loose, water enters the flue, runs down the liner, and softens the mortar joints below. That’s how a small cap problem becomes a spalling brick problem.
Signs a Santa Rosa cap has failed
Look for rust streaks running down the chimney chase or water staining inside the firebox after a heavy storm. A loose cap will also rattle in the wind. In Santa Rosa’s wet winter months, a failed cap is an open drain into your chimney. We replace caps with Olympia Chimney and Famco models, matched to the flue diameter and fuel type, and we re-seal the crown at the same time.
What the cap replacement includes
We remove the old cap, inspect the flue opening with a camera, install the new cap with mechanical fasteners, and seal the base. Before we start, you get a written price. The cap is typically in stock at our Bay Area office, so Santa Rosa appointments usually happen within the same week you call.
Chimney Liner Installation in Santa Rosa
Chimney liner installation in Santa Rosa runs $1,800 to $3,600 depending on flue height, diameter, and whether the old clay liner needs to be broken out first. The liner is the inner pipe that channels smoke and combustion gases safely out of the house. When it cracks, shifts, or fills with glazed creosote, the chimney can’t do its job. Especially in older Santa Rosa homes with 60-to-100-year-old clay liners, this is the repair that separates a safe chimney from a liability.
When a Santa Rosa home needs a new liner
If a Level 2 camera inspection shows cracked flue tiles, gaps between sections, or third-degree creosote glazing that brush sweeping won’t remove, the liner is the answer. We install DuraFlex stainless liners sized to the appliance and the flue. DuraFlex is a flexible, smooth-wall liner that handles high heat and resists creosote buildup better than old terracotta. For gas appliances, we often specify a different DuraFlex grade. The brand is chosen by the job, not by margin.
Why we don’t cut corners on liner work
A liner sleeve over a cracked clay flue without the right insulation will fail. We won’t sell that. Every liner install in Santa Rosa includes a camera inspection before and after, a written scope, and a written one-year guarantee. If the liner fails within that year, the return visit is free. That’s the 365-Day Done Right Promise, in writing.
Trusted Brands We Service in Santa Rosa
We stock and install professional-grade chimney parts from Copperfield, Olympia Chimney, and DuraFlex, so most cap and liner work in Santa Rosa doesn’t wait on a special order. We work on existing systems from HeatShield, Gelco, and Famco as well, and we carry the seals, fasteners, and crowns to match new components to older masonry. When you call for chimney repair in Santa Rosa, we can usually tell you over the phone which brand fits your flue and whether the part is in stock. No guessing, no “we’ll see when we get there.” A written price comes first.
Common Chimney Repair Problems We See in Santa Rosa Homes
- Water intrusion through flashing and a rusted cap. Santa Rosa’s wet winters expose failed flashing fast. Water softens the mortar in the smoke chamber and streaks firebrick before anyone notices a fire risk. We re-set flashing and replace caps with Olympia Chimney and Famco models.
- Spalling brick on pre-1940 chimneys. The 1906 rebuilds and early-1900s housing stock around the Junior College and West End neighborhoods show brick faces popping off from years of moisture. That’s spalling, and it will not stop on its own. We repoint mortar and rebuild brick courses where needed.
- Third-degree creosote glazing inside liners. Burning unseasoned oak or running smoldering fires in a cold stove produces a tar-like glaze on the flue wall. A brush won’t move it. Chemical treatment or liner replacement is the answer, and we won’t tell you a sweep fixed it when the camera still shows glaze.
- Cracked chimney crowns mistaken for simple leaks. A cracked crown lets water into the smoke chamber and can go unnoticed for years. In Rincon Valley and Bennett Valley homes with wide masonry crowns, we see this often. The fix is a crown repair or re-cast, not just flashing patchwork.
In Coffey Park, we were called to a 2018 rebuild where the original masonry chase had survived the fire but the carpenter-style chimney cap had rusted and the flashing had pulled away, letting water streak the smoke chamber. Our technician ran a Level 2 inspection with camera, found first-degree creosote on the flue liner and a damper that no longer sealed, then replaced the cap with an Olympia Chimney model, re-set the flashing, and applied HeatShield to a hairline crack above the firebox. We gave the homeowner a flat price before booking, showed the before-and-after photos in the report, and told her the damper could wait until fall.
Pricing for Chimney Repair in Santa Rosa, CA
A standard chimney repair in Santa Rosa runs between $250 and $3,600 depending on the scope. Cap replacement: $250 – $950. Mortar repointing: $500 – $1,400 for typical flue height. Flashing repair: $300 – $800. Spalling brick repair: $700 – $2,200 depending on brick access and course count. Full liner install: $1,800 – $3,600. These are the numbers we quote on the phone, not a bait price. What moves the cost is flue height, liner diameter, roof pitch, and whether the old liner needs to be broken out. A two-story chimney off the roof of a mid-century ranch in Montgomery Village costs more than a one-story flue in Roseland because of ladder setup time. The estimate is free, the written price comes before any work, and the invoice matches the price you approved. Call (830) 251-4560 for an exact quote.
We Also Serve Cities Near Santa Rosa
Flint Chimney Sweep covers Chimney Repair in Santa Rosa and the surrounding Sonoma County communities, including Sebastopol, Windsor, Rohnert Park, and Cotati. If you’re just outside city limits, we’ll tell you the drive time when you call and give you the same written price before dispatch. Same crews, same guarantee, same flat pricing.
Serving Santa Rosa, CA - Our Local Coverage Area
We’re based in the Santa Rosa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Santa Rosa
A Level 1 inspection is what we do during a routine sweep, once a year if you burn wood. A Level 2 inspection uses a camera and is required when you buy a home, after an earthquake or a chimney fire, or when a major change like a new liner or appliance happens. In Santa Rosa, with 1906 rebuilds, mid-century clay liners, and post-2017 rebuilds all on the same block, a Level 2 is the only way to know what’s actually inside your flue. If you bought a Santa Rosa house and haven’t had a Chimney Inspection in Santa Rosa, call (830) 251-4560.
No. First-degree creosote is a flaky soot; third-degree is a hard, tar-like glaze that requires chemical treatment or liner replacement. The only honest way to tell is with a camera in the flue. We include camera inspection with every Level 2 service in Santa Rosa, and the photo report shows you exactly what we saw. No camera, no guesswork. That’s the standard.
You can put it off, but it will get worse. A loose cap and pulled flashing let water into the flue and the smoke chamber every time it rains, and Santa Rosa gets real winter rain. The mortar softens, the brick spalls, and the repair bill climbs from a few hundred dollars to a few thousand. A cap and flashing repair in Santa Rosa runs $250 – $950 and $300 – $800 respectively. We’ll give you a written price before we book. Call (830) 251-4560.
We install and service all of them. DuraFlex liners are our most common liner install in Santa Rosa flues. Olympia Chimney and Famco caps are our standard cap replacements. HeatShield is used for localized liner and firebox repair. Copperfield and Gelco components are matched when the existing system calls for them. The brand is picked by the job, not by what we make the most margin on.
A sweep removes creosote and soot. A repair fixes something that is damaged: a cap, the flashing, the crown, the mortar joints, the brick, or the liner. In Santa Rosa, with the mix of 1906 rebuilds, mid-century clay liners, and post-2017 rebuilds, repair work often involves matching new components to an old flue rather than replacing the whole system. We give you a written scope and a written price before any repair starts, and the work is covered by our 365-Day Done Right Promise.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Santa Rosa under The Garrison Standard since 2002.
Call (830) 251-4560 for a free chimney repair estimate in Santa Rosa. A live person answers, 24/7.