Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Staten Island
Chimney repair in Staten Island typically runs $225 – $1,850 depending on what’s actually wrong, and the honest answer is that most homeowners here don’t need a full rebuild, they need a proper camera inspection to find out what’s failing at the top of the stack. Flint Chimney Sweep has served Staten Island since 2002, with background-checked technicians who work in West Brighton, Great Kills, Tottenville, and everywhere in between. We don’t quote over the phone and we don’t guess. We run a camera, show you the photos, and hand you a written price before any tool comes off the truck. Call (830) 251-4560 to schedule an inspection.
Key Takeaways
- A camera inspection with photo report is included before any repair recommendation, so you see exactly what we see.
- Written pricing before work starts – the number you approve is the number on the invoice, always.
- Every repair carries the 365-Day Done Right Promise: if a covered repair fails within one year, we return at no charge.
- Staten Island’s salt air off the Kill Van Kull and Raritan Bay accelerates crown and flashing failure on North Shore homes especially.
- Live person answers the phone 24/7 – no voicemail trees, no “we’ll call you Monday.”
Why Flint Chimney Sweep Is Staten Island’s Preferred Chimney Repair Company
Reputation on Staten Island is built one block at a time, and we’ve been earning it since 2002 as part of the Garrison Partners family. Homeowners in neighborhoods like Huguenot and Westerleigh know our crews show up in uniform, inside the window we gave, and that the person on the phone at 2 a.m. is a live human being, not an answering service.
We don’t pad quotes with scare tactics. If your flue is fine and your crown is cracked, we’ll tell you that. If a repair can safely wait until after burning season, we’ll tell you that too, and we’ll put it in writing. The Garrison Standard is the code every Garrison Partners location follows: documented scope, documented price, documented guarantee. That’s the whole model. Hank Delano sets that tone from the top, and our techs carry it down to the smoke chamber.
Reviews from Staten Island customers mention the same things: the technician showed photos, the price didn’t move, the crew left the property cleaner than they found it. That’s not marketing language. That’s the job description.
Chimney Repair Companies in Staten Island
Chimney Repair Companies in Staten Island fall into two camps: sweep-only outfits that don’t touch masonry, and masonry contractors who don’t understand flue dynamics. Flint Chimney Sweep works both sides of the stack because on Staten Island, the salt air off the Kill Van Kull and Raritan Bay means the crown, the flashing, and the exterior brick are part of the same repair conversation as the liner. A typical repair visit starts with a camera run to see what’s actually failing, and we hand you a written scope with a flat price before any work begins. Most Staten Island repairs land between $325 and $1,650 depending on whether it’s a crown rebuild, a flashing replacement, or a partial reline.
Flue Liner Repair and Relining
The flue liner is the inner channel that moves smoke and combustion gases up and out of the house. When clay tile joints crack, creosote hides in those gaps and heat transfers to the surrounding masonry. We install DuraFlex and HeatShield systems, spec’d by job, not by margin. A camera inspection tells us whether you need a joint-by-joint repair or a full reline, and we show you those photos before we quote anything.
Chimney Caps and Crowns
The crown is the concrete slab on top of the chimney, and the cap is the metal lid above the flue opening. Both take a beating from Staten Island’s wind-driven rain, especially along the North Shore. A cracked crown lets water into the brick, which freezes and thaws and eventually spalls. Replacing a crown runs $450 – $1,100 on most Staten Island homes, cap included.
Chimney Masonry Repair in Staten Island
Chimney Masonry Repair in Staten Island is a waterfront-specific trade, because the salt-laden fog off the harbor accelerates spalling on exterior brick and mortar joints. Where inland Brooklyn chimneys might go decades before repointing, Staten Island stacks on the North Shore and anywhere within sight of the water show mortar deterioration years earlier. We handle repointing, brick replacement, tuckpointing, and full chimney rebuilds, and we’re the Chimney Repair team that treats the crown and flashing as part of the masonry job, not an add-on. Most masonry work on Staten Island runs $850 – $2,600 depending on stack height, access, and how much brick needs replacement.
Repointing and Tuckpointing
Repointing means scraping out deteriorated mortar joints and replacing them with fresh mortar. Tuckpointing is the more precise version, used when the surrounding brick is in good shape but the joints look woven. Salt spalling makes this the most common masonry repair we do on Staten Island homes, especially pre-1980 construction with lime-based mortar. A typical repointing job on a single-story stack runs $600 – $1,400.
Spalling Brick and Partial Rebuilds
Spalling is what happens when water gets inside the brick, freezes, and pops off the face. It’s not cosmetic, because each lost brick face lets more water in. If a Staten Island chimney has spalled but the structure is sound, we cut out the damaged units and set new brick. If the spalling has compromised the stack, we rebuild from the roofline up. Partial rebuilds run $1,200 – $3,000, and we’ll always show you photos of the damage before you commit to anything.
Trusted Brands We Service in Staten Island
We stock and install professional-grade materials from manufacturers that publish their specs, so you can verify quality independently. On Staten Island jobs, we typically spec Copperfield caps for salt-exposure resistance and Famco bases for solid anchorage. For liner work, we run DuraFlex and HeatShield because they handle the thermal cycling Staten Island’s freeze-thaw winters demand. These aren’t whatever’s on the truck. They’re selected for the conditions your chimney actually faces.
Common Chimney Repair Problems We See in Staten Island Homes
- Salt-driven spalling on exterior brick. North Shore and waterfront-adjacent homes get wind-driven salt fog off the Kill Van Kull and Raritan Bay. That salt wicks into mortar, freezes in winter, and pops brick faces by spring.
- Cracked crowns blamed on the flue. Water dripping into the firebox during nor’easters is almost never a flue problem. We camera the flue and usually find the crown or flashing is the real entry point.
- Failed flashing at the roofline. Chimney flashing leaks into the smoke chamber and attic long before staining shows up inside. By the time homeowners see the water mark, mortar joints have been wicking moisture for months.
- Clay flue liners with cracked joints. Older Staten Island masonry stacks typically have original clay tile liners. First-degree creosote hides in those gaps on camera, and brushing alone never gets it out. HeatShield resurfacing handles it without a full reline.
Pricing for Chimney Repair in Staten Island, NY
A standard chimney sweep in Staten Island runs $180 – $300, and most repair jobs here land between $450 and $1,850. Repointing runs $600 – $1,400 per stack. Crown replacement runs $450 – $1,100. Flashing repair runs $350 – $900. A partial rebuild with new brick starts around $1,200. What moves the number is access (two-story stacks off a steep pitch cost more in labor), how much masonry actually needs cutting out, and whether a liner repair is joint-by-joint or full-length. We give you the written price before work starts, not after. Call (830) 251-4560 for a free estimate on your Staten Island chimney.
We Also Serve Cities Near Staten Island
Our crews cover Chimney Repair in Staten Island and the surrounding boroughs, including Brooklyn, Manhattan, the Bronx, and Long Beach. If your chimney sits anywhere in the metro’s salt-affected zones, we’ll run the same camera-first process and give you the same written price before any repair work begins.
Serving Staten Island, NY - Our Local Coverage Area
We’re based in the Staten Island area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Staten Island
If you burn fewer than a dozen fires a year, an annual camera inspection is probably more than you need, but you should have an inspection at least once every two years because Staten Island’s real risk is at the top of the stack, not the firebox. Salt fog off the harbor and freeze-thaw cycles crack crowns and flashing even when the flue sees almost no use. A Level 1 inspection every other year catches that before water does structural damage. If you burned regularly in past seasons and recently stopped, get a sweep and inspection now, before the next burning season. Call (830) 251-4560 for an exact quote, estimates are free.
A Level 1 inspection is a visual check of the accessible parts of the chimney, a Level 2 adds camera scanning of the flue interior and is what we recommend before any repair, and a Level 3 involves opening up masonry to reach concealed areas. For almost any Staten Island repair, you need a Level 2 because the camera shows exactly where the liner, crown, or flashing has failed, and that determines the scope and the written price. We send you the photos from the scan, so you don’t have to take our word for the recommendation. If you’re buying or selling a home in Staten Island, a Level 2 is the right call for the same reason.
The only way to know for certain is a camera scan of the flue interior, because cracked clay tile joints are not visible from the firebox or the roof. During a sweep we run the camera and look for gaps where creosote has filled in between tiles, which is the telltale sign of liner deterioration. If the joints are intact, a good brushing is all you need. If we find first-degree creosote hiding in cracked joints, we’ll show you the footage and give you a written price for HeatShield joint repair or a DuraFlex reline, and you decide. We don’t recommend liner work without camera evidence, and we’ll tell you plainly if a repair can safely wait a season.
A cracked flue liner or a blocked flue can absolutely create a carbon monoxide risk inside a Staten Island house, but the risk depends on how you’re using the chimney. If the liner has failed and you’re still burning, combustion gases can leak into wall cavities and living space. If you don’t burn until the repair is done, the risk drops significantly, but water damage from a failed crown or flashing continues all year. We’ll give you an honest assessment with the camera footage to back it up, and we’ll tell you if it’s safe to wait or if you should stop using the fireplace until repairs are complete. Call (830) 251-4560 for a free estimate, and mention you want the camera-report protocol.
We don’t promise same-day dispatch because a proper repair needs a camera inspection, a written scope, and the right materials spec’d for your chimney, not just whatever a technician has spare on the truck. What we can do is get you on the schedule quickly, usually within a day or two across all five boroughs, and a live person answers the phone around the clock to book or answer questions. For an active water leak into the house, we can prioritize an inspection, but we will never rush a repair and guess at the cause. Call (830) 251-4560 and ask for the next available inspection window.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Staten Island since 2002.