Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Temple City
Chimney repair in Temple City typically runs $220 to $1,800 depending on what’s actually failing, and most repairs are booked within a week, not a month. We work across Temple City every week, from the 1940s tract homes north of Las Tunas Drive to the newer construction along Rosemead Boulevard. The work starts with a written price before any tools come off the truck, then a camera inspection that shows you exactly what needs fixing and what can wait. Call (830) 251-4560 and you’ll reach a live person, day or night.
Why Flint Chimney Sweep Is Temple City’s Preferred Chimney Repair Company
We’ve been part of the Garrison Partners family since 2002, and Temple City customers get the same Garrison Standard every other location follows: background-checked, uniformed technicians, a written price before work begins, and a 365-Day Done Right Promise on every repair. That means if a covered repair fails within one full year, we return at no charge. No argument, no invoice, no second trip fee.
Temple City’s tight residential rooflines and mature street trees create repair patterns we see week after week. Cracked crowns, crushed caps, and flashing that separated after a big wind. When we quote a job near Temple City Park or off Camellia Street, we know the housing stock, the roof pitches, and the local building conditions that affect how a chimney fails. Dispatch and scheduling are coordinated from our Los Angeles office, but the crews serving Temple City are local, familiar with the streets, and arrive inside the window we give you.
Hank Delano leads the team. When you call, you speak to a person who can answer questions about your specific chimney, not a call center reading a script. That’s the point of the whole operation.
Written Price Before We Start. Always.
Every job gets a written price delivered before any work begins. No exceptions. The number on the invoice is the number you approved. If the scope changes because we find something unexpected on camera, you approve the new number before we proceed. That’s the Garrison Standard, and it applies to every service call in Temple City.
365-Day Done Right Promise on Every Repair
Every chimney repair we complete in Temple City carries a written guarantee, valid for one full year from the service date. If a covered repair fails within that period, we come back and fix it free. No charge for the visit, no charge for the work. It’s written on the invoice before you pay.
Chimney Cap Installation in Temple City
Chimney cap installation in Temple City usually runs $280 to $650 including the cap and labor, and it’s one of the most common repairs we do because of how many homes here sit under mature oaks and camphor trees. A proper cap keeps rain, birds, squirrels, and leaves out of the flue liner. Without one, water enters the flue, mixes with creosote, and forms an acidic slurry that eats mortar joints from the inside. In Temple City’s tight rooflines, we often see caps that were never installed when the home was built, or caps sized wrong for the flue, or caps crushed by a fallen limb.
Famco and Copperfield Caps, Sized to the Flue
We install Famco and Copperfield caps because both manufacturers build sturdy, correctly sized units that hold up in Southern California weather. The wrong cap size leaves gaps that let birds and rain through, and we see that regularly on Temple City homes close to mature street trees. We measure the flue, specify the right cap, and install it so it seats correctly and stays put.
What Temple City Homeowners Should Watch For
If you hear birds inside the chimney, see water staining on the ceiling near the fireplace, or notice rust on the damper, the cap is likely missing or damaged. A camera inspection confirms it in minutes. This is a repair we quote flat before we start, so there’s no surprise at the end.
Chimney Cap Replacement in Temple City
Chimney cap replacement in Temple City typically costs $240 to $520 when the flue and crown are still sound, and the job usually takes under an hour once we’re on the roof. Replacing a damaged cap with the correct Famco or Copperfield unit stops water intrusion and animal entry before either one becomes a $1,000 problem. We replace caps on Temple City homes every week, and the most common culprits are rusted galvanized caps, caps that didn’t fit the flue to begin with, and caps dented by falling branches.
When Replacement Beats Repair
A cracked or rusted cap can sometimes be patched, but if the mesh is torn or the hood is separated from the base, replacement is the honest fix. We’ll show you the damage on camera before you spend a dollar. On homes near Temple City Park and the surrounding streets, wind-driven debris shortens cap life, so we often recommend a heavier-gauge replacement when the old cap fails.
Straight Answer, Every Time
Some companies will sell a cap replacement when a repair would do. We show you the cap on camera, explain what failed, and quote replacement only when it’s the right call. If the existing cap can be re-seated and sealed, that’s what we recommend, and the price reflects it.
Trusted Brands We Service in Temple City
We work with professional-grade chimney products from DuraFlex, HeatShield, Gelco, Famco, and Copperfield, specified by job, not by margin. For Temple City customers, that matters because local supply houses carry these brands, which means we can get parts fast and stand behind them through the manufacturer’s warranty. Whether it’s a Famco cap on a 1950s tract home or a HeatShield resurfacing on an older flue, the material is selected because it suits the job and the home, and we name the brand on your written quote so you can verify it independently.
Common Chimney Repair Problems We See in Temple City Homes
- Crushed or missing chimney caps. Temple City’s mature oak and camphor trees drop limbs that dent and crush caps. We’ve replaced caps on homes off Camellia Street, Lower Azusa Road, and throughout the neighborhoods around Temple City Park after storm winds came through.
- Cracked chimney crowns. The tight rooflines across Temple City trap debris and standing water on chimney crowns. Water seeps into the crown, freezes rarely but expands in heat, and cracks the mortar. This is why our repair work here usually starts on the roof, not inside the firebox.
- Flashing that separated from the roofline. High winds and seasonal expansion push flashing away from the chimney stack on homes along Rosemead Boulevard. Once flashing gaps open, water follows the chimney chase down into the ceiling, and it shows up as stains around the fireplace wall.
- Second- and third-degree creosote glaze. On older Temple City fireplaces that burn unseasoned wood, the flue liner glazes over. A brush won’t remove third-degree creosote. The fix is a Gelco stainless liner or HeatShield resurfacing, and we’ll show you the glaze on camera before recommending either one.
Pricing for Chimney Repair in Temple City, CA
Here’s what chimney repair in Temple City actually costs. A standard chimney sweep runs $180 to $260. Chimney cap installation runs $280 to $650. Crown repair typically runs $350 to $700. Mortar repointing on a standard single-flue chimney runs $400 to $900. Flue relining with Gelco stainless or HeatShield resurfacing runs $900 to $2,400 depending on flue height and access. Flashing repair runs $250 to $550. Every one of those prices is stated before we start work, in writing, on every job in Temple City. Call (830) 251-4560 for a free estimate, and we’ll give you a flat number before booking.
We Also Serve Cities Near Temple City
If you’re searching for Chimney Repair in nearby areas, our crews also work in El Monte, San Gabriel, Arcadia, and Rosemead. The same written pricing, camera inspection, and one-year guarantee apply everywhere we go. Whether you’re in Temple City or across the city line, you can reach us at (830) 251-4560. We also maintain a page specifically for Chimney Repair in Temple City if you want more detail on this market.
Serving Temple City, CA - Our Local Coverage Area
We’re based in the Temple City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Temple City
Once a year, per NFPA 211, and that’s not a sales pitch, it’s the national fire protection standard we follow. Temple City’s mature trees and tight rooflines mean caps and crowns fail faster than the flue itself, so a Chimney Inspection - Temple City catches damage before water reaches the firebox. If you burn wood more than occasionally, an annual inspection is worth it. Call (830) 251-4560 to schedule one, and you’ll get a written price before we book it.
Yes. We give a written price for every repair before any work begins, on every job in Temple City. Cap replacement, crown repair, flashing, repointing, flue relining. You’ll know the number before you approve anything. For an exact quote on your chimney, call (830) 251-4560. Estimates are free.
It shows the full interior of the flue liner from the firebox to the cap, and we record it as a photo report you receive after the inspection. On Temple City homes, we look for third-degree creosote glaze, cracked flue tiles, separated mortar joints, and water entry at the crown. You see exactly what we see, and you decide with the evidence in front of you. If we find something that needs repair, we point to it on camera. Call (830) 251-4560 to schedule a camera inspection.
If the flue shows second- or third-degree creosote glaze, a brush won’t remove it, and re-sweeping won’t fix it. The glaze is baked onto the liner and requires a Gelco stainless liner or HeatShield resurfacing. We determine this with a camera, not a guess, and we show you the glaze before recommending anything. A brush-only sweep on a glazed flue does nothing for fire safety. If you’re not sure what’s in your flue, call (830) 251-4560 for a flat-price inspection.
It can be, even if you haven’t lit a fire. Animals build nests, wind drives debris into the cap, and a rusted damper or blocked flue prevents proper draft when you do light a fire. Carbon monoxide is odorless and colorless, and a blocked flue forces it back into the house. On a slate-roof ranch off Camellia Street near Temple City Park, we found a crushed Famco cap, a spalled crown, and a rusted damper on a chimney that hadn’t been used in two years. The animals and weather had been working the whole time. Call (830) 251-4560 for a camera inspection before you burn again.
Get Your Temple City Chimney Repaired Right
Hank Delano and the team at Flint Chimney Sweep have been repairing chimneys under the Garrison Standard since 2002. We give you a written price before the work starts, a camera inspection with a photo report, and a one-year guarantee on every repair. When you call (830) 251-4560, a live person answers, day or night, and you’ll know the number before we book. That’s how Chimney Repair should work in Temple City.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Temple City as part of the Garrison Partners family since 2002.