Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Upland
Chimney repair in Upland, PA typically runs $185 – $400 for crown sealing and mortar work, $600 – $2,900 for full rebuilds or liner replacement, and most jobs are booked within a week of your call. We serve Upland homeowners with a written price before any tool comes off the truck, a camera inspection with a photo report you keep, and repairs guaranteed in writing for one full year. Call (830) 251-4560 and Hank Delano’s team will get your chimney squared away on the first visit.
Why Flint Chimney Sweep Is Upland’s Preferred Chimney Repair Company
We’ve worked on every type of chimney Upland has to offer, from the brick rowhomes off 6th Street to the mid-century single-family houses near Chester Creek. Upland customers call us because we don’t leave them guessing. The number we quote over the phone is the number on your written estimate, and the written estimate is the number on your invoice. No price creep at the door, no surprise add-ons after we’re on the roof.
Hank Delano runs a disciplined crew. Every technician is background-checked, uniformed, and arrives inside the window we give you. When a Upland homeowner has a question about a crack in the crown or a draft issue, a live person answers the phone around the clock. You’re never routed through a voicemail tree or told to fill out a form and wait. We answer, we schedule, we show up.
We’re part of the Garrison Partners family, founded in 2002, and we operate under The Garrison Standard: documented scope, documented price, documented guarantee before any work begins. That standard applies to every repair we make in Upland, from a small flashing patch to a full chimney rebuild. Our local Chimney Repair team doesn’t consider a job finished until you’ve seen the photo report and signed off.
Chimney Crown Repair in Upland
Chimney Crown Repair in Upland addresses the concrete or stone slab that caps your chimney and sheds water off the masonry. Upland’s climate works hard against chimney crowns. Our inland location means real temperature swings between summer and winter, and every freeze-thaw cycle pushes moisture deeper into hairline cracks until spalling starts. A crown that fails lets water into the smoke chamber and firebox, which is how you end up with rusted dampers, crumbling brick, and expensive rebuilds.
On a typical Upland crown repair, we inspect the full perimeter, grind out failed mortar, seal active cracks, and repour or recoat the top surface so it sheds water again. Expect to spend $185 – $400 for sealing and resurfacing. If the crown has broken down beyond patching, we’ll form and pour a new one, which runs higher but stops the water damage for good.
Crown Sealing and Crack Repair
Small crown cracks are the cheapest problem to fix and the most expensive to ignore. We clean, fill, and seal cracks with a masonry-grade flexible sealant that handles Upland’s hot-dry summers without peeling. This is a same-week job in most cases.
Full Crown Repour
When chunks are missing or the crown is porous all the way through, patching won’t hold. We build forms to Upland’s typical flue dimensions, pour a new reinforced crown, and shape it with a drip edge so water actually leaves the chimney instead of running down the brick.
Chimney Repair Companies in Upland
Chimney Repair Companies in Upland don’t all operate the same way. Some give you a phone quote and then upcharge the minute they see the flue. Others sub out the work to whoever’s available. Flint Chimney Sweep sends the same uniformed, background-checked technicians to your Upland home every time, and our prices are put in writing before any work begins. That’s the Garrison Standard, and it’s non-negotiable on every job we take in Upland.
We see a lot of Upland homeowners who had a previous company tell them they needed a full liner replacement when the liner was fine. Our rule is simple: if we can’t show it to you on camera, we don’t recommend it. You get a photo report from the inspection. You see exactly what we see. If a repair can wait, we tell you it can wait. If it can’t, we tell you why and show you the damage.
Locally Stocked Parts for Common Upland Chimneys
Because Upland has a mix of older masonry chimneys and newer factory-built units, we keep a range of caps, dampers, flashings, and liner components on the truck. That means fewer return trips for parts and faster completion on most Upland repair calls.
Free Return Visits When Repairs Don’t Hold
Every repair we make in Upland carries our 365-Day Done Right Promise. If a covered repair fails within the guarantee period, we come back at no charge, no argument. The guarantee is written, not verbal, and it’s yours for a full year from the service date.
Trusted Brands We Service in Upland
We install and service liners, caps, dampers, and flashing from brands we can stand behind: DuraFlex, Olympia Chimney, Famco, and Copperfield. When a Upland homeowner has an existing DuraFlex stainless liner or a HeatShield resurfaced flue, we service it in place without trying to sell you a replacement you don’t need. Because we stock common parts locally, most Upland repair jobs are completed in a single visit. You get professional-grade materials specified by the condition of your chimney, not by whatever carries the highest margin.
Common Chimney Repair Problems We See in Upland Homes
- Cracked crowns from inland heat-and-dry cycling. Upland’s big temperature swings push moisture into crown hairline cracks, then freeze-thaw does the rest. Water gets into the smoke chamber, rusts the damper, and starts spalling the brick face.
- Third-degree creosote glaze in flue liners. We run into hardened creosote glazing in Upland homes that burn seasoned but resinous local oak or citrus wood at low, smoldering settings. A standard brush won’t touch it; it has to be chemically treated or mechanically removed.
- Wind-driven debris and bird nests clogging caps. Santa Ana wind events push debris, leaves, and nesting material into chimney caps around Upland. A clogged cap reduces draft and raises carbon monoxide risk, often without any visible smoke problem inside the house.
- Failed flashing at the roofline. Upland’s damp winter-to-spring season exposes flashing gaps quickly. Leaks show up as water stains on the ceiling near the fireplace, and the fix is usually a flashing repair rather than a full rebuild.
Pricing for Chimney Repair in Upland, PA
Here’s what Upland homeowners can expect to pay. Crown sealing and crack repair: $185 – $400. Flashing repair: $250 – $600. Mortar repointing and tuckpointing: $40 – $80 per square foot. Chimney rebuilding above the roofline: $1,800 – $2,900. Liner replacement with DuraFlex: $1,500 – $3,500 depending on flue height and access. These are straight numbers for the Upland market, not nationwide averages. Your written estimate is free, and the price you approve is the price you pay. Call (830) 251-4560 for an exact number on your chimney.
We Also Serve Cities Near Upland
Flint Chimney Sweep serves Upland and the surrounding Pennsylvania communities, including Chimney Repair in Upland and regular calls across Philadelphia, Levittown, Norristown, and Chester. If you’re just outside Upland, call us anyway. Chances are we’re already in your neighborhood this week.
Serving Upland, PA - Our Local Coverage Area
We’re based in the Upland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Upland
For a wood-burning fireplace used regularly during the season, once a year. If you burn oak or citrus wood, or if you tend to run the fire low and slow, you may need it twice. Gas fireplaces can go longer, but annual inspection is still smart. Upland’s dry heat means creosote doesn’t wash away; it bakes on. Call (830) 251-4560 and we’ll give you a straight answer based on what we see in the flue.
First-degree is dusty soot, second-degree is flaky tar, and third-degree is a hard glaze that a standard brush cannot remove. In Upland, we see third-degree more often than you’d expect because inland homeowners burn resinous local wood at low temperatures, which produces heavy creosote that bakes hard in the dry heat. Third-degree creosote is a chimney fire waiting for a spark. We can remove it, but it requires chemical treatment and mechanical cleaning, not just a standard sweep.
Crown cracks can wait a season if they’re hairline and you’re not seeing water stains inside. Bigger cracks, chunks missing, or spalling brick below the crown mean water is already getting in, and water is what turns a $300 crown repair into a $3,000 rebuild. We’ll tell you plainly which category your crown falls into, and we’ll show you a picture of it. If it can wait, we’ll say so. If it can’t, we’ll tell you why.
Yes. Every inspection includes a camera run through the full flue and a photo report you keep. You see exactly what we see: creosote build-up, cracks, gaps in the liner, water entry points, animal nests. Nothing is recommended that you can’t verify in the photos. This is standard on every Upland inspection and repair we do.
Yes. We install, repair, and service DuraFlex stainless liners and HeatShield resurfaced flues. If your existing liner has a small gap or separation, we can often repair it in place without a full replacement. We’ll inspect it first, show you the problem, and give you a written price before any liner work begins. Call (830) 251-4560 to schedule.
What a Chimney Repair Call in Upland Actually Involves
Here’s the process, no mystery about it. You call (830) 251-4560, a live person answers, and we schedule a window. Our technician arrives in uniform, introduces themselves, and sets up protection around the fireplace before anything else. Then we run a camera inspection of the flue, check the crown, flashing, damper, and firebox. You get a written report with photos and a line-item price for any recommended work. You approve the price before we start. Work gets done, we clean up, and you sign off. The whole thing is documented, photographed, and guaranteed in writing.
We were called to a home near the historic Euclid Avenue corridor where the homeowner had never had the chimney looked at since buying the house. Our tech ran a Level 1 inspection, found second-degree creosote in the flue liner and a cracked chimney crown that was letting water into the smoke chamber, then installed a HeatShield liner repair and poured a new crown. The damper had also seized, so we freed and lubricated it before we left. The photo report showed the homeowner exactly what we found before and after. That’s the standard on every Upland job.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Upland since 2002.