Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Angleton
A standard chimney sweep in Angleton runs $189 to $289 for a single flue with a basic fireplace, and most jobs are finished in about an hour once our techs are on-site. That price is written down and approved by you before the first tool comes off the truck. We are Chimney Sweep specialists, and we schedule Angleton work every week year-round, not just when the first cold snap hits Brazoria County. Call (830) 251-4560 and a live person answers, any hour, any day.
What makes Angleton chimneys different is the humidity. That is not a sales line. It is the single biggest factor in what our crews see when they pull caps and drop a camera down a flue in zip codes 77515 and the surrounding rural roads off Highway 288. More on that below.
Why Flint Chimney Sweep Is Angleton’s Preferred Chimney Sweep Company
We do not ask Angleton homeowners to take our word for anything. Every job gets a written price before work starts, and every repair carries a written guarantee for one full year. If a covered repair fails inside that year, we come back and fix it at no charge. That is the 365-Day Done Right Promise, and it applies in Angleton the same as anywhere else we work.
Our technicians are background-checked and uniformed, so when the truck pulls up on West Mulberry or down by the hospital district, you know exactly who is walking through the door. Hank Delano runs our crews by a simple rule: no camera, no recommendation. You will see the footage we see. We send a photo report with every inspection, showing the flue liner, smoke chamber, damper, and cap. If we tell you work is needed, you will have the pictures to verify it yourself.
For Angleton homeowners who have been burned by no-show crews or a price that changed at the door, we try to make the process feel less like a gamble. The number you approve before we begin is the number on the invoice. That is not a promotion. It is how we have done our scheduling and billing since Flint Chimney Sweep joined the Garrison Partners family of independently owned chimney service companies in 2002.
Chimney Cleaning in Angleton
Chimney Cleaning in Angleton means removing creosote, soot, and whatever the local wildlife dropped down the flue during the months the fireplace sat cold. Our crews brush the full flue length with poly or steel brushes sized to your liner, then vacuum out the smoke chamber and firebox. After the mechanical brushing, we hand-clean the smoke shelf, which is the ledge just above the firebox that catches most of the falling debris and is missed by quick jobs.
A standard sweep here runs $189 to $289 for an open fireplace with one flue. If the chimney has not been cleaned in several years, or if you burn a lot of unseasoned local oak and pecan, the buildup takes longer to clear and the price reflects the extra labor. You will know the number before we begin.
The Gulf Coast Creosote Pattern
Angleton homes burn differently than houses up north. Fires here are short and occasional, lit on the handful of cold, damp evenings between November and February. Those low, smoldering fires produce more creosote per hour of burn than hot, established fires do. Paired with the high humidity off the Gulf Coastal Prairie, that creosote stays sticky longer and cures hard on the flue walls. A chimney that is only used twenty nights a year can still carry a serious creosote load by late winter.
Camera Verification After the Brush
We do not consider a chimney cleaning finished until we have run a camera through the flue and shown you the walls. The camera catches second-degree and third-degree glazing that a brush alone will not remove, along with cracked tiles or shifted liner sections. In Angleton, where chimneys sit idle three seasons out of four, that verification is the difference between a clean flue and one that only looks clean from the top.
Fireplace Cleaning in Angleton
Fireplace Cleaning in Angleton is the interior half of the job: the firebox floor, the side brick or refractory panels, the damper, and the area behind the glass doors if your unit has them. We remove the loose ash and soot, scrape the baked-on deposits from the firebox floor, and clean the damper track so the plate opens and closes instead of rusting shut.
Fireplace cleaning is included as part of every standard sweep. If the firebox just needs ash and soot removal and the flue was recently cleaned, we can quote the fireplace portion separately, typically $99 to $149 for a straightforward open firebox. Our techs will tell you at the time of booking which service actually matches the condition of the fireplace.
What the Firebox Tells Us About Water
In Angleton, a firebox with crumbling mortar joints or spalling brick face is usually a water problem, not a fire problem. Rain gets past a loose cap or a cracked crown, runs down the flue, and soaks into the firebox brick. Then the Gulf humidity slows the drying, and the brick starts falling apart from the inside out. We flag that during the fireplace cleaning and show you the damage with the camera before any repair conversation happens.
Dampers and the Coastal Climate
Rusted damper hardware is one of the most common findings in Angleton chimneys. The hinge plates and operating lever corrode from the humid air that sits in the flue all summer. A damper that will not open is a fire hazard; one that will not close is a drafting problem that wastes conditioned air and can push smoke back into the room when the fire dies down.
Trusted Brands We Service in Angleton
We install and work with professional-grade chimney components from Olympia Chimney, Famco, and DuraFlex. These are the brands our crews have used for years because they hold up to Gulf Coast moisture and hold tolerances that cheap imports do not. When an Angleton chimney needs a new cap, a replacement damper, or a flue liner, we specify the product by the job, not by whatever was left on the truck. For most common cap and damper replacements, we carry parts on the truck and can finish the repair in the same visit as the sweep.
Common Chimney Sweep Problems We See in Angleton Homes
- Rusted and seized dampers. The same humidity that makes Brazoria County summers heavy corrodes damper hardware in chimneys that sit idle for nine months. A damper that will not close is a constant draft pulling conditioned air up the flue, and a damper that will not open is a carbon monoxide risk if you try to burn.
- Loose or missing chimney caps. Shoulder-season storms off the Gulf send sideways rain that beats against cap bases. A cap that has rusted loose lets water run straight down the flue, rust the damper, and soak the firebox brick. We see this most often in older ranch homes along North Velasco and the streets around the fairgrounds.
- Creosote glazing behind the smoke shelf. Homeowners watch the technician brush the flue and assume the chimney is clean. But the smoke shelf, the ledge just above the firebox, catches buildup the brush cannot reach, and second- or third-degree creosote behind that shelf can ignite if the chimney gets hot enough. A camera inspection shows the shelf clearly.
- Flue liner erosion from humidity. Clay tile liners absorb moisture from the air flowing up the flue. Over years of Angleton wet-dry cycles, the tiles crack and spall, and the liner loses its seal. The result is a chimney that will not draft properly and can leak combustion gases through the brick. HeatShield resurfacing or a DuraFlex liner stops the problem, but the homeowner has to know the liner has failed to make that call.
Pricing for Chimney Sweep in Angleton, TX
A standard open-fireplace sweep in Angleton runs $189 to $289. A Level 1 inspection is included with the sweep. If you have not had the chimney looked at in years, or you bought the house and have no idea what is inside the flue, a Level 2 inspection with camera runs $149 to $249 and gives you a photo report of every section of the chimney. Repairs are quoted separately, in writing, before any repair work begins. You will not get a feel-good number on the phone and a different number at the door. Call (830) 251-4560 for a free estimate and we will give you the real figure by phone before you book.
We Also Serve Cities Near Angleton
Our crews cover Angleton and the surrounding Brazoria County communities, including Danbury, Lake Jackson, Clute, and Freeport. If you are outside Angleton proper but within the county, call (830) 251-4560 and we will confirm coverage for your address. Scheduling and dispatch are coordinated from the brand’s Dallas-Fort Worth office, and our local crews serve Angleton directly.
Serving Angleton, TX - Our Local Coverage Area
We’re based in the Angleton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Angleton
Once a year, even if you only burn a handful of fires each winter. The National Fire Protection Association standard (NFPA 211) says chimneys should be inspected at least annually, and swept when buildup reaches 1/8 inch. In Angleton’s climate, that threshold is often hit even with light use because the humid air keeps creosote sticky and it cures into hard glaze instead of flaking off naturally. A chimney that burned twenty fires last winter can be as heavily loaded as one that burned a hundred hot fires up north. If you burn mostly pine or build small smoldering fires, bid toward a spring sweep rather than waiting for the fall rush. Call (830) 251-4560 if you are not sure what you have and want someone to look.
A Level 1 inspection is what happens during a standard sweep. We examine the readily accessible parts of the chimney, the firebox and flue walls, the damper, and the cap, with a visual check only. A Level 2 inspection adds a camera run through the full flue and is required when you are buying or selling a home, after an exterior event like a chimney fire or a big storm, or when you have changed anything in the system. A Level 3 inspection involves opening up part of the chimney structure, which is rarely needed and only happens after a Level 2 inspection has already found a problem. In Angleton, where housing stock ranges from older brick ranches to newer construction along Highway 288, a Level 2 inspection is the most useful for anyone who has not had the chimney looked at in three or more years.
Yes. Every job gets a written price, and you approve that number before we start. A standard sweep in Angleton is $189 to $289, a Level 2 camera inspection is $149 to $249, and any repair we propose gets its own written quote. If the camera shows work that changes the scope, we stop and show you the footage before any additional work is approved. The number on the invoice is the number you approved. That is a non-negotiable part of how we run every service call, and it applies in Angleton the same as every other market we serve.
Third-degree creosote is a hard, shiny glaze that forms when creosote is repeatedly heated and cooled without being fully removed. In Angleton, the damp, low-temperature fires that are common here are exactly the conditions that produce it. A brush will glide across the surface and leave the glaze intact. Removing third-degree creosote requires mechanical or chemical treatment that breaks the glaze down before the flue can be safely cleared. If we find it during a camera inspection, we will show you the footage and explain the options before any work is quoted.
If your chimney has been swept and inspected in the last year, your damper opens and closes, your cap is seated, and the camera shows a clean liner with no cracks or missing sections, you can probably wait until the next burning season. What should never be deferred is a chimney with a missing cap, a damper that will not open, a liner with visible cracks, or third-degree creosote. Those are hazards that get worse every month, and in Angleton’s wet climate, a missing cap does not just wait politely. It does damage while you ignore it. If you are not sure which category you are in, call (830) 251-4560 and we will tell you straight.
If you are ready to have your Angleton chimney swept, inspected, or just looked at by someone who will show you the camera footage and put the price in writing before any work starts, call (830) 251-4560 for a free estimate. A live person answers around the clock, and we will schedule your visit with a written price you approve before the tools come off the truck.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Angleton and Brazoria County since 2002.





Before
After
Before
After
Before
After