Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Fish Hawk
A standard Chimney Sweep in Fish Hawk runs between $189 and $279 for a single flue with a same-week booking, and every job includes a camera inspection with a photo report you keep. If you live in FishHawk Ranch, Starling, or the older sections off Boyette Road, we know the homes, the roof pitches, and the factory-built metal chimney systems that dominate this area. Call (830) 251-4560 and you’ll get a written price before a single tool comes off the truck.
Why Flint Chimney Sweep Is Fish Hawk’s Preferred Chimney Sweep Company
Fish Hawk homeowners have dealt with enough no-show chimney crews to know the difference between a sales pitch and a straight answer. We’re part of the Garrison Partners family, founded in 2002, and every location operates under The Garrison Standard: a written price before work starts, background-checked and uniformed technicians, and a written guarantee on every repair that’s valid for one full year. Those aren’t talking points. They’re our operating rules.
We service Fish Hawk from our South Florida dispatch office, and our techs know the specific pain points of this area’s chimney stock. Fish Hawk’s housing runs heavily toward post-2000 construction with factory-built metal chimney systems, not old masonry stacks. That changes what a proper sweep looks like. We check the chase cover, storm collar, and cap, not just the firebox, because that’s where water problems start here. Our customers in Fish Hawk see the same thing on every job: camera footage of the flue, a written price, and a direct answer about whether the chimney can wait or needs work now.
Chimney Maintenance in Fish Hawk
Chimney Maintenance in Fish Hawk means more than running a brush. A proper maintenance visit includes a visual check of the full system, removal of loose creosote and soot, and a camera run through the flue liner so you can see what’s happening where you can’t look. Most Fish Hawk homes have factory-built metal chimneys, so we also inspect the chase cover at the top, the storm collar, and the termination cap, because that’s where rain and sun do their worst.
You need maintenance before burning season starts, roughly September or October in this part of Florida. But given how humid Fish Hawk summers get, chimneys here also benefit from a quick check after the rainy season ends, even if you haven’t burned in months. Water intrusion behind a rusted chase cover doesn’t fix itself. A basic maintenance visit typically runs $149 to $189, and we’ll tell you plainly if nothing else needs attention.
Annual Sweep
Even with light use, a Fish Hawk chimney should be swept once a year. Creosote is a byproduct of burning, and it builds up in tiny amounts even during short fires. In a metal flue, that buildup can reach first-degree thickness faster than people expect, and you won’t see it from the firebox.
Fireplace Cleaning
We remove soot from the firebox, damper, smoke shelf, and glass doors if you have them. A clean firebox looks good, but it also gives us a clear view for the camera inspection. If the firebox looks spotless and the flue is lined with powder creosote, that’s exactly the kind of thing the camera shows you.
Chimney Sweep Services in Fish Hawk
Chimney Sweep Services in Fish Hawk cover the full mechanical cleaning: brush out the flue, remove creosote and soot from the smoke chamber and damper, and clean the firebox. We run a camera through the liner afterward so you can see what was removed and what condition the liner is in. Every job gets a written price first. If the flue needs more than a sweep, we show you the footage and explain it in plain words.
For a standard open fireplace with a single flue, a sweep in Fish Hawk runs $189 to $279. If you have a factory-built system with a chase, the job still falls in that range unless we find a rusted chase cover or damaged cap that needs replacement, which we’ll quote separately and only after showing you the photos. Most jobs take 60 to 90 minutes.
Creosote Removal
Creosote comes in three degrees: first is a light powder, second is fluffy and flaky, third is a hard glaze. Brushes handle the first two. Third-degree creosote can’t be brushed off and often means the liner is compromised. We’ll tell you which one you have and what it means for your chimney.

Level 1 and Level 2 Inspections
A Level 1 inspection is visual and covers the readily accessible parts of the chimney. A Level 2 adds the camera run and is what we recommend after any weather event, before buying a home, or if you haven’t had the chimney checked in years. Most Fish Hawk homeowners booking a sweep with us automatically get the Level 2 camera scope as part of the standard work.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fish Hawk
We work on factory-built chimney systems from Olympia Chimney and Copperfield, and we install and service liners from DuraFlex and components from Famco. Because so many Fish Hawk homes use these specific manufacturers, our techs carry common replacement parts on the truck: caps, storm collars, chase covers, and liner components. That means fewer two-trip jobs for Fish Hawk customers. If your chimney needs a part we don’t have on hand, we order it and return without charging a second dispatch fee. You’ll know the brand and the cost before any repair starts.
Common Chimney Sweep Problems We See in Fish Hawk Homes
We recently had a tech out in Starling at FishHawk Ranch on a DuraFlex-lined factory chimney. The homeowner had never had it swept, the firebox looked clean, but the camera run showed first-degree creosote powdering the full length of the flue liner and a rusted chase cover dripping water past the damper. We swept the liner, brushed the smoke chamber, and photographed the water staining on the chase top so the homeowner could see exactly why we recommended resealing it. No fire risk that day, but a cheap fix now versus a rusted-out chase later. That’s the kind of thing we see constantly here:
- Clean firebox, dirty flue. Factory-built metal chimneys in Fish Hawk can build first-degree creosote in the liner even with light use. It only shows on camera, and it’s the most common surprise we find.
- Rusted chase covers on FishHawk Ranch roofs. The sun-and-rain cycle cracks and rusts chase covers and chimney caps, letting water reach the damper and smoke chamber. Nothing inside warns you until staining or odor shows up.
- Waiting for an alarm before booking an inspection. By the time third-degree creosote glazes, a brush can’t remove it and the flue liner often needs replacement. That’s a $2,000+ problem instead of a $189 sweep.
- Rainy-season water intrusion. Chimneys in Fish Hawk sit through daily summer downpours. A small gap in the storm collar lets water run behind the chase and into the smoke chamber. We find it all the time.
Pricing for Chimney Sweep in Fish Hawk, FL
A basic chimney sweep in Fish Hawk with camera inspection runs $189 to $279 for a single flue. A maintenance visit without a full sweep is $149 to $189. If we find a rusted chase cover or cracked cap, replacement typically runs $220 to $480 depending on the exact part and your roof pitch. A full flue relining with a DuraFlex liner runs $1,800 to $3,200 on most Fish Hawk homes, but we’ll only recommend that if the camera shows the current liner is actually failing. Every one of these prices is written down before work starts. Call (830) 251-4560 for a free estimate.
We Also Serve Cities Near Fish Hawk
Our crews handle Chimney Sweep in Fish Hawk and regularly run routes through Jacksonville, Miami, Tampa, and Orlando. If you’re just outside the Fish Hawk boundary, call and we’ll confirm coverage for your street.
Serving Fish Hawk, FL - Our Local Coverage Area
We’re based in the Fish Hawk area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Fish Hawk
Once a year, even with light use. Fish Hawk’s factory-built metal chimneys accumulate first-degree creosote faster than people expect, and it doesn’t show from the firebox. The annual look is less about heavy cleaning and more about catching water intrusion at the chase cover before it rots the system from the top down. If you burn fewer than ten fires a year, you could stretch it to 18 months, but we don’t recommend going longer than that because the cap and storm collar need eyes on them after every Florida rainy season. We’ll tell you honestly if your chimney can wait. Call (830) 251-4560 and we’ll talk through your usage.
A sweep at your Fish Hawk home takes about 60 to 90 minutes. We run a brush through the flue, clean the smoke chamber and damper, clean the firebox, then run a camera through the liner from bottom to top. You get sent the photo report before we leave. If the roof is safe to access, we check the chase cover, storm collar, and cap. You get a written price before work starts, and that price holds. No upsell at the door. No “while we’re here” add-ons.
No. The camera inspection and photo report are included in every sweep we do in Fish Hawk. We don’t treat documentation as an upgrade. The written price you approve includes the sweep, the camera run, and the photos. If we recommend repair work, those photos are the evidence. You keep them either way.
We service both, but factory-built metal systems dominate Fish Hawk, so that’s most of what we touch. We work on Olympia Chimney and Copperfield factory systems, and we service and install DuraFlex liners. The process is the same: sweep the flue, camera the liner, inspect the chase cover and cap. The difference is which parts we check, and our techs know these systems specifically because they see them every day in FishHawk Ranch, Starling, and the communities off Boyette Road.
A Level 1 is a visual check of readily accessible parts. A Level 2 adds the camera scope of the flue interior and is what we do on every standard sweep in Fish Hawk. A Level 3 involves opening up part of the chimney or wall and is only necessary when we suspect hidden damage, like after a lightning strike or a chimney fire. Most Fish Hawk homeowners only ever need Level 1 and Level 2, and Level 2 comes standard with our sweep. Call (830) 251-4560 and we’ll tell you which level your chimney actually needs.
If you’re in Fish Hawk and want a straight answer about your chimney, call (830) 251-4560. You’ll get a written price before any work starts, a camera report you keep, and a one-year written guarantee on any repair we do. That’s The Garrison Standard, and it applies to every job we take.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Fish Hawk as part of the Garrison Partners family since 2002.





Before
After
Before
After
Before
After