Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Sweep Across Gallatin
A standard chimney sweep in Gallatin runs $169 – $289 for a single flue with standard creosote buildup, and most jobs are booked inside a week. That price includes a camera inspection of the flue interior and a written photo report before the tech leaves your driveway. Call (830) 251-4560 and you’ll get a person on the line, not a voicemail tree. We work in Gallatin year-round, from the ranch houses off Green Lea Boulevard to the two-story colonials near Station Camp, and we put every price in writing before the first tool comes off the truck.
Gallatin homes burn a lot of wood between November and March. That means creosote, and creosote means chimney fires if it’s left alone. We’re not here to scare you into a liner replacement you don’t need. We’re here to sweep the flue, show you the photos, and tell you straight whether the chimney is safe to use.
Why Flint Chimney Sweep Is Gallatin’s Preferred Chimney Sweep Company
Flint Chimney Sweep has been operating since 2002 as part of the Garrison Partners family of independently owned chimney service companies. Every technician who pulls up to a home in Gallatin is background-checked and in uniform. You’ll know who’s at the door before you open it. Hank Delano leads the team, and he holds every job to The Garrison Standard: a written price before work begins, a documented scope, and a full-year guarantee on any Chimney Repair in Gallatin we perform.
Local homeowners off Nashville Pike and down near the bypass tell us the same thing: they’ve been burned by chimney companies that no-show, or show up and then change the number. We don’t do that. The price we write on the estimate is the price you approve. If a covered repair fails within 365 days, we return at no charge, no argument. That’s the 365-Day Done Right Promise, and it’s written on every repair invoice we hand to a Gallatin customer.
We also answer the phone at 2 a.m. Christmas Eve. A live person, 24/7. If your chimney is smoking into the house on a cold Gallatin night, you don’t need a callback form. You need someone to tell you what to do.
Chimney Services in Gallatin
Chimney Sweep services in Gallatin start with a full interior and exterior assessment, because a brush through the flue only matters if the flue is actually sound. We sweep the smoke chamber, remove creosote and soot from the firebox, check the damper operation, and inspect the crown and flashing from the roofline. Most sweeps in Gallatin are completed in 60 to 90 minutes.
Firebox and Smoke Chamber Cleaning
The firebox is where wood burns; the smoke chamber is the funnel above it that directs smoke into the flue. Both collect soot and first-degree creosote. In Gallatin’s humid summers, that residue traps moisture and accelerates metal damper rust, which is one reason a sweep here includes a damper check even if you only burn once a month.
Annual Maintenance for Wood-Burning Fireplaces
If you burn a cord or more per season in Gallatin, plan on an annual sweep. Homes that burn occasional weekend fires can often go two years, but only the camera can confirm that. We’ll tell you if the chimney can safely wait. No upsell, no manufactured urgency.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Sweep Certified in Gallatin
Chimney Sweep Certified Chimney Sweep in Gallatin means every technician follows the same inspection protocol on every job, whether it’s a brick ranch off Airport Road or a newer build in the Station Camp area. The work includes a written condition report, photos of the flue before and after, and a plain-language explanation of anything we find. Homeowners in Gallatin deserve to see the inside of their own chimney, not just hear about it over the phone.
Creosote Removal by Stage
First-degree creosote is dry and flaky, and a brush removes it well. Second-degree creosote is hardened and shiny, often on the smoke chamber walls, and calls for scraping and specialized tools. Third-degree creosote is a tar-like glaze that a brush cannot remove safely; it requires chemical treatment or liner replacement. We identify the stage by camera, not guesswork.
Gas Log and Insert Compatibility Checks
Gallatin has a lot of pre-1970s homes with fireboxes built for wood only. When a gas log set or insert is added without a flue liner upgrade, the existing liner may not be rated for the appliance now sitting in it. That’s a code and safety issue, and it’s one of the most common findings on sweeps in this town. We’ll check it and show you the photos.
Trusted Brands We Service in Gallatin
We work with professional-grade chimney materials from manufacturers like Copperfield, Olympia Chimney, and DuraFlex. When a Gallatin home needs a new chase cover, a replacement damper, or a liner component, we specify the part by job requirements, not by what’s easiest to stock. Local supply runs are quick, which means most repair follow-ups after a sweep can be scheduled promptly. You’ll see the brand name on the written estimate before any work is approved.
Common Chimney Sweep Problems We See in Gallatin Homes
- Rusted or misaligned dampers. Gallatin’s humid summers condense inside the flue, and metal dampers are usually the first thing to go. A damper that won’t fully open or close changes draft and can push smoke back into the living room.
- Second-degree creosote in the smoke chamber. A brush alone won’t fully remove it. This is the exact spot where chimney fires often start, and it’s why a visual check from the firebox floor isn’t enough.
- Spalled chimney crowns from freeze-thaw cycles. Gallatin winters dip below freezing overnight and warm again by afternoon. That cycle cracks masonry crowns, lets water into the flue, and accelerates liner mortar damage over time.
- Gas log sets installed on wood-only fireboxes. A large share of Gallatin’s pre-1970s ranch and two-story homes have had gas inserts added without a liner rating check. The firebox holds the appliance, but the flue liner may not be rated for it.
Pricing for Chimney Sweep in Gallatin, TN
A standard chimney sweep and inspection in Gallatin runs $169 – $289 for a single flue with first-degree creosote. Second-degree creosote removal adds $80 – $150 depending on the smoke chamber condition. A chimney cap replacement typically adds $120 – $220 for the part and install. Crown sealing runs $300 – $500 when water intrusion is confirmed. If a liner replacement is recommended, expect $2,800 – $5,500 depending on the flue length and liner material. Every price is written before work begins, and the estimate is free. Call (830) 251-4560 for an exact quote.
What changes the number: flue height, creosote stage, damper condition, and whether the chimney is on a steep roof pitch that requires additional setup. We’ll tell you the price before you approve anything.
We Also Serve Cities Near Gallatin
Our crews cover the broader Sumner County and Middle Tennessee area, including Gallatin and nearby communities like Hendersonville, Portland, Mount Juliet, and White House. If you’re just outside Gallatin city limits, call and we’ll confirm dispatch coverage to your address. The same written pricing and guarantee apply everywhere we work.
Serving Gallatin, TN - Our Local Coverage Area
We’re based in the Gallatin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Gallatin
Most wood-burning fireplaces in Gallatin need a sweep every 1 – 2 years, and the deciding factor is burn volume and creosote stage, not a calendar. If you burn a cord or more each season, annual is safer. If you only light a fire on occasional weekends, the flue may be fine for two years. The only way to know is a camera inspection. We’ll give you a straight answer and never recommend a sweep you don’t need. Call (830) 251-4560 to book an inspection and get a written photo report.
A Level 1 inspection is a visual check of accessible portions of the chimney and is part of every standard sweep. A Level 2 inspection adds a camera scan of the flue interior and is required when the home changes hands, after a chimney fire, or when the appliance is modified. A Level 3 inspection opens up portions of the chimney structure and is rare; it’s ordered when a Level 2 reveals damage that can’t be assessed visually. In Gallatin, a Level 2 camera scan is standard on our sweeps because we believe homeowners deserve to see the flue condition for themselves.
No. We book our Gallatin sweeps on a schedule, and we don’t promise same-day dispatch or scramble crews at the expense of doing the job correctly. What we do promise is that the appointment window we give you is the window we’ll hit, and the written price we quote is the price you’ll pay. If you have an active chimney fire or smoke entering the house, stop using the fireplace immediately, keep the damper closed, and call (830) 251-4560 so a live person can advise you on next steps.
Third-degree creosote is a hardened, tar-like glaze that bonds to the flue walls after prolonged high-heat burning with poor draft. A brush alone will not remove it safely, and attempting to do so can score the liner and create ignition points. Third-degree creosote typically requires chemical treatment or a liner replacement depending on the condition of the underlying flue. We identify it on camera during the sweep and show you the footage before recommending any treatment path.
Yes, every Gallatin sweep includes a roofline inspection of the crown, cap, and flashing. Gallatin’s freeze-thaw cycles put real stress on masonry crowns, and a cracked crown lets water into the flue liner all year long. We document what we find and include it in the written photo report. If the crown needs sealing, we quote it as a separate line item, not as a surprise on the invoice.
Call (830) 251-4560 to schedule your Gallatin chimney sweep. You’ll reach a live person, get a written price before any work begins, and receive a camera photo report showing exactly what we found inside your flue. If a covered repair fails within a year, we return at no charge. That’s how we work in Gallatin.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Gallatin since 2002.