Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Repair in Los Angeles: What to Know First
Olympia Chimney chimney repair in Los Angeles typically runs $350 – $2,800 depending on whether you need mortar repointing, flashing replacement, or a partial rebuild. We’re an independent Olympia Chimney service provider, which means we repair the product but we don’t represent the manufacturer. Most jobs are completed in one visit, and you get a written price before any work starts.
This page is for Los Angeles homeowners who have an Olympia Chimney product on their roof or attached to their fireplace and need straight answers about what’s failing and what it costs to fix. If that’s you, call (830) 251-4560 and we’ll talk through what you’re seeing.
How Olympia Chimney Products Fail – and How We Fix Them
Olympia Chimney makes solid, serviceable chimney components. But every brand has weak points, and in Los Angeles the failure patterns are consistent. Here’s what we see in the field.
- Olympia aluminum chimney caps corroding at the seam. The slip-fit design on many Olympia caps leaves a seam that traps moisture. After five or six Los Angeles rainy seasons, that seam starts to bloom with white oxidation. We see it most on homes in the hills where morning marine layer sits longer. The fix is replacement with an aftermarket stainless cap from Copperfield or Famco, which costs less than an OEM Olympia cap and lasts longer in salt-adjacent air.
- Flashing failure at the roof line on Olympia chase installations. Olympia chases are fine, but the flashing detail where the chase meets the roof is only as good as the original install. We regularly find gaps where a previous contractor used roofing cement instead of a proper step flashing. Los Angeles heat cycles expand and contract that cement until it cracks. Our repair is a full step flashing replacement, not a patch.
- Cracked clay flue tiles inside Olympia masonry chimneys. This one is common across every chimney brand in Los Angeles because thermal shock is brutal here. A tile crack on an Olympia chimney isn’t an Olympia-specific defect, but we flag it consistently on older Olympia installs from the 1980s and 1990s. We repair it with HeatShield, a poured ceramic system that resets the flue surface without a full teardown.
- Mortar joints spalling on Olympia masonry chimneys. The freeze-thaw cycle everyone talks about on the East Coast doesn’t apply here, but Los Angeles does have something else: acidic air. Emissions from the 5 and the 134 settle and slowly eat at mortar joints, especially on chimneys within two miles of the freeway corridors. We repoint those joints with Type N mortar, which holds better in our climate than the Type S some contractors default to.
- Olympia prefab chimney warping under direct sun exposure. Prefab Olympia chimney sections on south-facing and west-facing roofs in Los Angeles take a beating from UV. We’ve measured surface temps over 160°F on some July afternoons. That heat causes the outer galvanized layer to warp and pull away from the insulation. The repair is section replacement, and we’ll spec a heat-reflective exterior paint after install to slow the next cycle.
Our Olympia Chimney Chimney Repair Process
Every Olympia Chimney repair in Los Angeles follows the same sequence. No surprises, no scope changes without a written update.
- 1
You call, a person answers. Live phone coverage 24/7. You describe the symptom, we ask a few questions about your chimney’s age and what you’re seeing.
- 2
We inspect the Olympia unit on site. Camera down the flue if needed, visual on the crown, cap, flashing, and masonry. We photograph everything that matters.
- 3
You get a written price before we touch anything. That number includes parts, labor, and cleanup. If we identify an OEM-vs-aftermarket decision, we spell out both options and let you choose.
- 4
We do the repair. Background-checked, uniformed technicians. The truck carries DuraFlex, HeatShield, Gelco, and Copperfield inventory, so most Olympia repairs don’t need a second trip for parts.
- 5
We test and document. Smoke test or camera confirmation depending on the repair. You get photos of the finished work.
- 6
You get the 365-Day Done Right Promise in writing. If a covered repair fails within one year, we return at no charge. No argument, no re-quote.
What Olympia Chimney Chimney Repair Costs in Los Angeles
Here are the price ranges we quote most often for Olympia Chimney work in Los Angeles. These are honest ranges, not teaser numbers.
- Mortar repointing (tuckpointing): $350 – $900 depending on how much of the chimney face needs work.
- Flashing repair or replacement: $400 – $1,200 depending on roof pitch and whether the chase is involved.
- Chimney cap replacement (aftermarket stainless): $150 – $500 installed.
- Spalling brick repair: $500 – $1,800 depending on how many bricks need replacement and whether they’re structural or cosmetic.
- Chimney waterproofing (Gelco sealer application): $250 – $700.
- Partial chimney rebuild (top 2 – 3 feet): $1,500 – $2,800.
What moves the price: roof access difficulty, how much masonry needs cutting out, and whether we’re repairing or replacing the Olympia component. If the repair involves a partial rebuild, permit requirements in some Los Angeles neighborhoods add cost. Call (830) 251-4560 for a free estimate specific to your chimney.
Why Los Angeles Homeowners Call Flint Chimney Sweep for Olympia Chimney Work
We’ve been doing chimney repair in Los Angeles since 2002 as part of the Garrison Partners family. Every repair carries a written guarantee valid for one full year. Every job gets a written price before any work starts, always. When a homeowner in Los Angeles calls us about an Olympia chimney, they’re usually coming off a bad experience with another company. They’ve had a no-show. They’ve had a price change at the door. They’re done with that. We run on The Garrison Standard: document the scope, honor the price, stand behind the work. As Hank Delano puts it, “Tell me what you’re seeing, I’ll tell you what it means.” Hank grew up in Eagle Rock and learned the trade through the construction technology program at Los Angeles Trade-Technical College, so when he walks a roof in Los Angeles, he’s seen that chimney’s pattern before. We’re an independent Olympia Chimney service provider, and we also work with DuraFlex, HeatShield, and Gelco, which means we’re not married to one parts supply chain and can spec the right material for the job.
FAQs
No. As an independent Olympia Chimney service provider, we repair existing installations without registering with Olympia, and our work does not void manufacturer warranties on unaffected components. If you have a warranty claim on an Olympia part, file it with the manufacturer before we do the repair, and we’ll work around that claim. Most Olympia warranties cover the original component, not the labor to access it.
Yes, but we usually recommend against them for caps and flashings. Olympia OEM parts are available through regional distributors, but aftermarket components from Copperfield and Famco are often better suited to Los Angeles weather conditions and cost less. We’ll show you the difference and let you decide before any work is approved.
Most Olympia chimney repairs in Los Angeles are scheduled within three to five days. If it’s a safety issue, like a flue tile collapse or a serious flashing leak, we’ll prioritize it. Call (830) 251-4560 and the person who answers will tell you the next available window.
Repair is almost always the right call unless the masonry is structurally compromised below the roofline. A partial rebuild of the top two to three feet costs $1,500 – $2,800 in Los Angeles. A full teardown and rebuild runs $8,000 – $15,000. If we can get you another decade for a quarter of that cost, we’ll say so plainly and put it in writing.
Water keeps getting in. On an Olympia chimney with failing flashing or cracked mortar, water intrusion accelerates spalling and eventually compromises the flue. A cracked flue tile that isn’t addressed can let carbon monoxide and embers into spaces they don’t belong. Most Olympia chimney failures we see in Los Angeles are ten-year slow-motion problems that could have been stopped at year three for a few hundred dollars. Call (830) 251-4560 and we’ll tell you honestly whether your repair can wait or needs attention now.
Written by Hank Delano, Owner, Flint Chimney Sweep at Flint Chimney Sweep, serving Los Angeles and nearby areas.