Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Silverdale, WA
A chimney sweep in Silverdale, WA typically runs $189 to $349 depending on the condition of the flue, the height and pitch of your roof, and how long it’s been since the last cleaning. We’re Flint Chimney Sweep, part of the Garrison Partners family founded in 2002, and every Silverdale job gets a written price before any work begins. If you’re in Silverdale and want the flue inspected, swept, or repaired, call (830) 251-4560 and a live person answers.
Why Silverdale Homes Are Different
Silverdale’s housing stock spans a wide arc: mid-century ramblers near the old Bangor gate, 1990s and 2000s subdivisions up the Clear Creek valley, and newer construction pushed into the wooded lots east of Silverdale Way. That mix matters because chimney systems age differently. A masonry fireplace in a 1970s home off Ridgetop Boulevard may have a terra cotta liner that’s been soaking up decades of wet Kitsap winters. A factory-built fireplace in a 2005 house on a ridge above Dyes Inlet often has a prefab flue with a different inspection standard altogether.
The climate is the other half of the story. Silverdale gets real rain, and a damp chimney accelerates creosote breakdown into the heavier, harder deposits that don’t brush away cleanly. We also see moss on chimney crowns and cap flashing, which is less common in drier parts of the state. It’s not unusual for a standard sweep in Silverdale to turn into a conversation about a new cap or minor masonry repair because the moisture exposure is constant, not seasonal.
Our Main Silverdale Services
Silverdale homeowners call us most often for two things: a chimney sweep before burning season and an inspection after a rainy winter. Repair work usually starts as one of those two.
Chimney Sweep in Silverdale
A Chimney Sweep in Silverdale means we run brushes and rods through the full flue length, remove creosote and soot from the smoke chamber and firebox, and leave the hearth area cleaner than we found it. In Silverdale, damp-season buildup often includes hard, glazed deposits, so we plan for extra tooling when the weather’s been wet. The work typically takes 60 to 90 minutes. You get a written price before the brushes come off the truck.
Chimney Inspection in Silverdale
A Chimney Inspection in Silverdale tells you exactly what’s going on inside the flue, often with photo documentation so you can see it yourself. Given Silverdale’s rain exposure and the age range of chimneys in the area, we’re usually checking for moisture entry, cracked flue tiles, and flashing that’s lifted. Nothing gets recommended without evidence you can look at. A Level 1 inspection accompanies most sweeps; we also perform real estate inspections when a Silverdale home changes hands.
Chimney Repair in Silverdale
Chimney Repair in Silverdale covers anything from a simple cap replacement to a full flue relining, which is replacing the inner liner that channels smoke safely out of the house. Silverdale’s combination of aging masonry and steady rain means we see a lot of crown work and water-damaged brick at the top of the chimney. Every repair carries our 365-Day Done Right Promise in writing, with a free return visit if a covered repair fails within the year.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Silverdale
We work with and specify professional-grade chimney products on Silverdale jobs every week. That includes HeatShield for flue resurfacing, Famco caps and venting components, and Copperfield weather systems. Stock and turnaround depend on the exact part, but we source directly from the manufacturer when a Silverdale job needs something specialized. See our brands for the full range we use.
Pricing for Chimney Company in Silverdale, WA
| Service | Typical range in Silverdale |
|---|---|
| Chimney sweep, standard | $189 – $349 |
| Level 1 inspection (often with sweep) | $125 – $250 |
| Level 2 inspection (real estate, weather event) | $250 – $450 |
| Chimney cap replacement | $125 – $400 |
| Chimney crown repair | $300 – $800 |
| Flue relining, standard liner | $1,800 – $3,600 |
| Flue resurfacing (HeatShield) | $1,400 – $2,800 |
| Chimney flashing repair | $300 – $700 |
| Smoke chamber parging | $450 – $1,100 |
What pushes a Silverdale quote higher is usually access: steep roof pitches around Dyes Inlet, two-story flues on newer construction, and heavy creosote that takes extra equipment time. Whatever the number, it’s on paper before we start, and the invoice matches the quote.
Neighborhoods We Serve in Silverdale
We cover all of Silverdale, from the commercial core along Silverdale Way out to the residential streets above the water and the newer builds east of Waaga Way. Our scheduling runs on zones, so we typically route Silverdale calls together to reduce drive time for the crew and the wait for you.
- Central Silverdale near Silverdale Way and Ridgetop
- Dyes Inlet waterfront and hillside streets
- Clear Creek valley and Bucklin Hill
- East Silverdale toward Islington and the county line
- Newberry Hill and the higher-elevation lots west of Tracyton
Most Silverdale homeowners can get on the schedule within a few working days, though the weeks right before burning season fill faster.
Service Area – Cities Near Silverdale
While this page covers Silverdale specifically, our crews also route through the neighboring communities on the Kitsap Peninsula. If you’re across the county line or just over the ridge, one of these pages will give you the local details: Poulsbo, WA, Tracyton, WA, Bremerton, WA, and Manchester, WA.
Serving Silverdale, WA - Our Local Coverage Area
We’re based in the Silverdale area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Silverdale
Most Silverdale calls get scheduled within a few working days. Dispatch and scheduling are coordinated from our Seattle office, and crews serve Silverdale directly, so you’re not waiting on a long-distance trip. Call (830) 251-4560 for the next available slot.
Standard chimney sweeps and most inspections don’t require an HOA approval or permit in Silverdale. Major exterior repair, like re-roofing flashing or relining, may fall under a homeowner association covenant depending on your neighborhood. We can advise on what your specific job likely needs, but any required submission stays with you and the association.
Creosote builds up in layers, and in Silverdale’s wet climate it can harden quickly. The heavier the buildup, the higher the chimney fire risk and the more expensive the eventual cleaning. A standard sweep runs $189 to $349; call (830) 251-4560 for an exact quote before the season starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Silverdale Customers Say
"Smoky fireplace for years. Turned out the cap was clogged. Swapped it and the smoke is gone."
- Brandon T."Rebuilt the crown on our chimney where water had been getting in. Neat masonry and a fair price."
- Eddie J."Very respectful, wore boot covers, laid drop cloths. Left no soot."
- Jan S.