Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Taylor, TX
Flint Chimney Sweep handles chimney cleaning, inspection, and repair across Taylor, TX. This page is where Taylor homeowners start: what chimney work costs here, which neighborhoods we serve, and why chimneys in this part of Williamson County behave the way they do. Every job gets a written price before any tool comes off the truck, and every repair carries a 365-Day Done Right Promise in writing. If you want to talk to a live person about your chimney, call (830) 251-4560.
Why Taylor Homes Are Different
Taylor’s housing stock runs older than a lot of what you’ll find in nearby suburbs. Many homes date from the early 20th century, built when chimneys were laid up with lime mortar and unlined flues. Over decades, that mortar softens and spalls, especially in a climate that cycles between hot, humid summers and cool, damp winters. We see a lot of homes around Downtown Taylor and along East Fourth Street with double-flue masonry chimneys that have never had a proper camera inspection. The other big factor is wood-burning frequency. Taylor gets real cold snaps, not just light chills, and many older homes still rely on their fireplace as part of the heating plan. That means creosote builds faster than a homeowner might expect. It also means any crack in a flue liner, any gap in a smoke chamber, is already at work during the first fire of the season. We work all over Taylor, including the Avery Park and Hanna Estates subdivisions, where newer construction still meets the same operational reality: a chimney is only as safe as what’s inside the flue, and the only way to see that is a camera feed, not a mirror on a stick.
Our Main Taylor Services
Most Taylor homeowners call us for one of two reasons: an annual sweep before burning season, or a chimney inspection after buying an older home. Here’s what each service involves in Taylor.
Chimney Sweep in Taylor
A Chimney Sweep in Taylor means removing creosote and blockages from the flue with professional rotary brushes sized to your chimney. In Taylor’s older homes, we often find nests from starlings and squirrels that have worked their way down through a missing chimney cap. A standard sweep runs $159 to $319. Heavy glazed creosote, which is common in wood-burning Taylor fireplaces that run hot and cool repeatedly, costs more because it requires chemical or mechanical removal. Every sweep includes a visual check of the flue, and our sweep techs are background-checked and uniformed.
Chimney Inspection in Taylor
A Chimney Inspection in Taylor puts a camera through the entire flue, from firebox to crown, and we give you a written photo report at the end. In Taylor, where pre-1970s homes are common, that camera is the difference between knowing and guessing. We routinely document missing mortar joints, cracked flue tiles, or a liner that needs HeatShield resurfacing rather than a full tear-out. A Level 2 inspection runs $199 to $399, which is money well spent before you sign on a home around Taylor’s historic district.
Chimney Repair in Taylor
Chimney Repair in Taylor covers everything from a new chimney cap to a full flue relining with DuraFlex or Gelco. Taylor’s clay tile liners crack over time, and once a crack opens, it will not close on its own. We quote the repair in writing before any work begins, and the job carries the 365-Day Done Right Promise: if a covered repair fails within one year, we return at no charge. No argument, no trip fee.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Taylor
We install and service professional-grade chimney products in Taylor, including HeatShield, Gelco, and Olympia Chimney. When your repair or liner job calls for a specific product, you’ll know the brand and why it was specified. See our brands for the full line we work with.
Pricing for Chimney Company in Taylor, TX
| Service | Typical range in Taylor |
|---|---|
| Chimney sweep (standard) | $159 – $319 |
| Chimney sweep (heavy glazed creosote) | $300 – $600 |
| Level 1 fireplace inspection | $129 – $299 |
| Level 2 inspection (with camera) | $199 – $399 |
| Chimney cap installation | $180 – $450 |
| Mortar crown repair | $350 – $800 |
| Flue tile replacement (first tile) | $300 – $700 |
| Flue tile replacement (per additional tile) | $100 – $200 |
| Smoke chamber parging | $400 – $1,000 |
| Chase cover replacement | $250 – $800 |
What pushes a Taylor chimney bill upward is access and condition. A steep roof pitch on a two-story home, or a chimney surrounded by mature trees, takes longer to set up safely. And a flue that has gone years without cleaning will have creosote that takes time and effort to clear. The price you get in writing before we start is the price you pay, full stop.
Neighborhoods We Serve in Taylor
We cover all of Taylor, from the older single-story blocks near the downtown grid to the newer subdivisions on the north and east sides. Our response time across the Taylor area is typically next-day for sweeps and inspections, with repair quotes delivered within a couple of business days after the camera work is done.
- Downtown Taylor
- Avery Park
- Hanna Estates
- The Julia
- Ranches at Taylor
Service Area – Cities Near Taylor
Beyond Taylor, we also serve Hutto, TX to the west, Pflugerville, TX southwest, Round Rock, TX further west, and Georgetown, CT for our Connecticut customers. Dispatch and scheduling are coordinated from our Austin office, but the crews who arrive at your Taylor home are local, uniformed, and background-checked.
Serving Taylor, TX - Our Local Coverage Area
We’re based in the Taylor area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Taylor
Most Taylor sweeps are scheduled within one to three business days, depending on the season. Fall is our busiest stretch. A live person answers the phone around the clock, so you can book a window that works without leaving a message.
For routine sweeps and inspections, no. For structural repairs or a full flue relining, City of Taylor permitting can apply. We’ll tell you in writing if your job needs one, and you’ll never be asked to pull a permit we can handle through the inspection process.
Yes. We service all of Taylor with no minimum job size. Whether you’re on a quarter-acre lot near Bull Branch Creek or in a new-build subdivision off Carlos G. Parker Boulevard, the process is the same: written quote before any work, uniformed tech, camera evidence on inspection days.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Taylor Customers Say
"Very respectful, wore boot covers, laid drop cloths. Left no soot."
- Jan S."Level 2 inspection before we bought the house. Report was detailed and saved us from a bad surprise."
- Archie M."Full inspection with a camera. Found a cracked flue tile and quoted the repair clearly. Did not push."
- Lydia C.