Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Arlington, WA
A standard chimney sweep in Arlington, WA runs $189 – $249, and most jobs are completed in 60 – 90 minutes. If you’re seeing soot streaks above the firebox or you can’t remember the last time the flue was cleaned, that’s the call to make. Flint Chimney Sweep serves Arlington under The Garrison Standard: a written price before any work starts, and a one-year written guarantee on every repair. Call (830) 251-4560 and a live person answers, day or night.
Why Arlington Homes Are Different
Arlington sits in the Stillaguamish River valley, which means two things for chimneys: damp, marine air from the west and a lot of older housing stock built before modern flue liners became code. Homes in the downtown Arlington neighborhoods around Olympic Avenue and the riverfront commonly date from the 1920s through the 1960s, with unlined or clay-tile-lined masonry chimneys that absorb moisture and crack over time. The result is a local pattern of flue deterioration that shows up differently than it does in drier parts of Snohomish County.
Wood-burning fireplaces get heavy use here from October through March. The softwoods burned in Arlington – Douglas fir, western redcedar, and alder – leave a creosote that is stickier and faster-building than the hardwoods common east of the Cascades. Add in the autumn damp, and a chimney that was clean in April can be carrying a serious glaze by Thanksgiving. Homes in the Gleneagle and Crown Ridge developments above the valley tend to be newer, with factory-built fireplaces, but the same burn-season realities apply. We plan Arlington sweeps around the fall pre-burn window for good reason.
Our Main Arlington Services
Most Arlington homeowners call us first about one of two things: a chimney that hasn’t been swept before burn season, or an inspection after a purchase or a weather event. Each of these services has its own Arlington page with full pricing and local detail.
Chimney Sweep in Arlington
A sweep in Arlington means more than running a brush up the flue. We remove creosote from the full length of the flue, clean the smoke chamber and damper assembly, and leave the firebox clean enough to inspect. The softwood creosote common around the Stillaguamish valley glazes hard, so we check for that specifically. You get a written price before any tool comes off the truck, and the sweep includes a visual condition report on the flue and cap. Learn exactly what’s covered on our Chimney Sweep in Arlington page.
Chimney Inspection in Arlington
Arlington homes with chimneys built before the 1980s often hold surprises: unlined flues, missing mortar joints, or old repairs that were never done properly. Our inspections put a camera in the flue so you see what we see, with a photo report handed to you at the end. That matters here because damp river air accelerates masonry wear in ways a visual-only inspection can miss. We inspect to the NFPA 211 standard, and the report tells you plainly what needs work now and what can wait. Details are on our Chimney Inspection in Arlington page.
Chimney Repair in Arlington
When an Arlington chimney needs repair, the most common culprits are cracked clay tiles in the flue and water-damaged crowns from the valley’s wet winters. We repair with professional-grade materials – DuraFlex and HeatShield liners, Famco caps, Copperfield flashing – specified by what the chimney actually needs, not what’s cheapest to install. Every repair carries our 365-Day Done Right Promise in writing. If a covered repair fails within a full year, we return at no charge. See repair options on our Chimney Repair in Arlington page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Arlington
We work on factory-built systems from the major manufacturers, and we stock common parts for DuraFlex, HeatShield, and Famco systems locally. Turnaround on most parts is under a week. For what we install and service, see our brands.
Pricing for Chimney Company in Arlington, WA
| Service | Typical range in Arlington |
|---|---|
| Chimney sweep (standard, one flue) | $189 – $249 |
| Level 1 inspection | $149 – $199 |
| Level 2 inspection (camera) | $299 – $449 |
| Chimney cap installation | $250 – $600 |
| Flue relining (stainless steel) | $2,500 – $5,500 |
| Flue relining (HeatShield resurfacing) | $1,800 – $3,500 |
| Crown repair | $300 – $800 |
| Masonry repointing (per chimney) | $800 – $2,500 |
| Damper replacement | $250 – $600 |
| Firebox repair | $500 – $1,800 |
What pushes a price higher in Arlington is usually access – steep rooflines in the foothill developments, or chimneys that need substantial masonry prep before a liner can go in. Whatever the quote, it comes in writing before any work starts, and the number you approve is the number you pay.
Neighborhoods We Serve in Arlington
We cover all of Arlington and the surrounding unincorporated pockets in Snohomish County. Most calls are answered with a same-week appointment, and we dispatch crews from our Seattle office to Arlington daily.
- Downtown Arlington (Olympic Avenue corridor)
- Gleneagle
- Crown Ridge
- Arlington Heights
- Smokey Point
Service Area – Cities Near Arlington
Our crews serve Arlington and the communities around the Stillaguamish valley. That includes Marysville, WA to the south, Granite Falls, WA to the east, Lake Stevens, WA to the southeast, and Stanwood, WA to the west. If you’re in one of these areas, call (830) 251-4560 and we’ll confirm coverage and scheduling.
Serving Arlington, WA - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Arlington
Most Arlington appointments are scheduled within the same week, and during the fall pre-burn rush we add extra crew days to keep wait times short. Call (830) 251-4560 and a live person gives you the first available slot, not a callback form.
Routine sweeps and inspections require no permit anywhere in Arlington or Snohomish County. Structural repairs and liner installations may trigger permit requirements depending on scope, and we tell you plainly if that applies to your job before any work begins.
Yes. We service the older masonry chimneys common in downtown Arlington and the manufactured systems in newer developments like Gleneagle and Crown Ridge. Every job gets the same written price and the same one-year guarantee on repairs, regardless of chimney type.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Arlington Customers Say
"Sweep showed up on time, in uniform, and ran a tight job. Cleaned the flue, inspected the firebox, and gave me a short written report. Veteran-run and it shows."
- Walt R."Chimney repair on loose bricks near the top. Tuckpointed it so it matches. Looks right."
- Rosa H."Direct, no nonsense, and polite. Exactly what I wanted."
- Tina W.