Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Austin, TX
A chimney sweep in Austin typically runs $189 – $380 for a standard cleaning, and a Level 1 inspection adds about $149 – $249. The city brings a few things to the job you don’t see everywhere: high summer heat that bakes mortar, surprise cold snaps that push people to light fires in flues that haven’t been opened in years, and a lot of mid-century houses built with masonry that’s now sixty-plus years old. Flint Chimney Sweep works Austin with one rule: written price first, written guarantee on every repair, no exceptions. Call (830) 251-4560 and a real person answers.
Why Austin Homes Are Different
Austin’s housing stock leans older than the city’s tech-boom reputation suggests. The central neighborhoods – Allandale, Crestview, Brentwood, Travis Heights, Hyde Park – are full of homes built between 1940 and 1975, and those chimneys were laid when fire codes and liner standards were far looser. The clay tile liners common in those era houses crack under what Austin dishes out: long stretches of 100-degree days followed by the occasional hard freeze. That thermal cycling works on mortar joints and tile seams slowly, year after year.
The other Austin factor is humidity. It’s not New Orleans, but the combination of heat and moisture means creosote doesn’t stay dry and flaky the way it does in West Texas. In Austin, a chimney that burns oak or cedar (which is plentiful and cheap here) can build up a glaze that hardens inside the flue. That’s a different cleaning job than dry soot, and it’s why we take the camera up before we recommend anything beyond a standard sweep. Terrain matters too: a lot of west Austin sits on limestone ledges, and some driveways and rooflines are steep enough that ladder placement and roof access are part of the planning conversation, not an afterthought.
Our Main Austin Services
Austin homeowners call us most often for a straight chimney sweep before burning season, and for inspections right after buying a house or before putting one up for sale. Here’s what each job looks like down to the details that matter in this city.
Chimney Sweep in Austin
A standard sweep removes the creosote and soot buildup inside the flue so the chimney can draft safely. In Austin, we see a lot of glazed creosote from cedar and live oak burned in fireplaces, which takes more than a brush-and-vacuum pass to remove correctly. Chimney Sweep in Austin covers the process, what we protect in your home, and what a written price includes. The short version: floors and furniture covered, HEPA vacuum run at the firebox, and a summary of exactly what came out of your flue and what condition the flue materials are in when we’re done.
Chimney Inspection in Austin
If you’re buying a house in Travis Heights, Allandale, or anywhere inside the older ring of Austin neighborhoods, an inspection will tell you whether that fireplace is safe to use before you light the first fire. A camera inspection is the only way to see inside a flue without taking it apart, and it’s the evidence we use for every repair recommendation. Chimney Inspection in Austin details the levels of inspection and what photographs you’ll receive. In this market, a chimney inspection is one of the cheapest pieces of leverage a buyer has before closing.
Chimney Repair in Austin
Repairs in Austin range from replacing cracked flue tiles inside the chimney to rebuilding the crown and shoulder masonry up top, and any repair we recommend is backed by a written guarantee valid for one full year. If a covered repair fails in that window, we return at no charge. Chimney Repair in Austin covers common jobs, material choices like HeatShield and DuraFlex, and how we document the condition before making a recommendation. No repair is recommended without camera evidence you can see for yourself.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Austin
We stock and install parts from the brands that earn their place: HeatShield for resurfacing damaged flue liners, Gelco for chimney caps and chase tops, and Olympia Chimney for dampers and chase pans across Austin. Our brands page lists what we carry and why. Standard parts are on the truck when we arrive, so most jobs finish in one visit.
Pricing for Chimney Company in Austin, TX
| Service | Typical range in Austin |
|---|---|
| Chimney Sweep (standard, one flue) | $189 – $380 |
| Chimney Sweep with glazed creosote removal | $300 – $450 |
| Level 1 Inspection | $149 – $249 |
| Level 2 Inspection (camera scope) | $325 – $550 |
| Chimney Cap Installation | $250 – $500 |
| Chase Pan Replacement | $600 – $1,200 |
| Flue Relining (DuraFlex, per foot) | $110 – $175 |
| Crown Repair / Rebuild | $450 – $850 |
| Firebox Repair (mortar joints, minor) | $300 – $650 |
| Damper Replacement | $275 – $500 |
What pushes a job higher in Austin is what the camera finds: a badly glazed flue, cracked terra cotta tiles, or a chase pan rusted through from years of hill country rain. We don’t care if it’s a $189 sweep or a $3,000 reline. The price is written before we start, and the number on your invoice is the number you approved.
Neighborhoods We Serve in Austin
We work across Austin proper, from the older central neighborhoods with heavy masonry fireplaces to the newer builds on the edges where prefab fireplaces and metal chase tops are the norm. Typical arrival windows in Austin are 2 to 4 days from booking, not weeks. Here are a few of the neighborhoods we’re in regularly:
- Allandale
- Crestview
- Travis Heights
- Hyde Park
- Tarrytown
Service Area – Cities Near Austin
Our Austin office dispatches crews to the surrounding metro, including Pflugerville, TX, Cedar Park, TX, Manor, TX, and Round Rock, TX. If you’re just outside Austin and want to know whether we can get to your street, call (830) 251-4560 and a live person will tell you the earliest window.
Serving Austin, TX - Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Austin
Most standard sweeps and inspections in Austin are scheduled 2 to 4 days from when you call. Repairs that require ordering parts like a custom chase pan or a specific cap may take longer, and we tell you the honest lead time before you book. Call (830) 251-4560 for the current schedule.
Chimney sweeps and inspections don’t require permits anywhere in Austin, and most HOA rules don’t apply to flue work inside the existing structure. Repairs that change the exterior – like adding a cap or rebuilding the top masonry – may need an HOA exterior modification form if you live in a deed-restricted community. We’ll flag that before you book.
We cover all of Austin, from the downtown condos and older core up through the north and west suburbs. If your mailbox says Austin, we’ll get to you. If you’re in one of the surrounding cities, check the service area list above or call (830) 251-4560 and ask directly.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Austin Customers Say
"Rebuilt the crown on our chimney where water had been getting in. Neat masonry and a fair price."
- Eddie J."Very respectful, wore boot covers, laid drop cloths. Left no soot."
- Jan S."Level 2 inspection before we bought the house. Report was detailed and saved us from a bad surprise."
- Archie M.