Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterGelco Chimney Cleaning in Fort Worth, CA | Flint Chimney Sweep
We clean and service Gelco in Arlington and throughout Fort Worth, CA, handling prefabricated fireplaces, inserts, and chimney systems. Our techs work on Gelco Model A, Model B, 2100 series, and 3000 series units every week, and we know the failure patterns this climate creates. One thing separates our Gelco work here: we document everything with photos before and after, so you see exactly what we found, including the clay-soil cap shifting we see across Fort Worth foundations. Call (830) 251-4560 for a written quote.
Why Fort Worth Residents Choose Us for Gelco Service
We’re an independent Gelco service provider, not a manufacturer affiliate or authorized dealer. That matters because we don’t carry a quota or push replacement parts you don’t need. Our sweeps have logged thousands of Gelco wood and gas chimney systems in Fort Worth, so we know how factory components age under North Texas sun, wind, and clay soil movement - experience that shapes our Chimney Sweep in Fort Worth.
Hank Delano, our owner, grew up in Eagle Rock and learned the trade through the building maintenance and construction technology program at Los Angeles Trade-Technical College before putting in years of hands-on chimney work. He trained our techs to diagnose Gelco fireboxes and dampers the same way he does: straight talk, no padding the invoice. We handle Gelco sales & service with the same discipline on every call.
Every job gets a written price before we start. Every repair carries our 365-Day Done Right Promise in writing for a full year. If a covered repair fails, we come back at no charge. That’s the Garrison Standard, and it applies to every Gelco chimney cleaning in Fort Worth we perform.
Common Gelco Chimney Cleaning Problems We Solve in Fort Worth
- Hairline cracks in Gelco Model A fireboxes. North Texas freeze-thaw cycles take a toll on rear brick panels. We see these cracks routinely in Fort Worth homes, and we’ll photograph the panel and give you a straight read on whether it’s cosmetic or a safety issue.
- Pilot assembly fouling in Gelco gas inserts. Dusty summer air and clay soil particulate settle into pilot assemblies across Tarrant County. Your Gelco 2100 series insert may light intermittently or not at all. We clean the assembly and verify gas flow, then show you the before and after.
- Corroded or loose Gelco factory caps. The mounting tabs on original Gelco caps give out after years of wind and rain. When the cap shifts, water drives straight into the flue and rusts the damper below. We see this on Gelco units all over Fort Worth.
- Warped, seized Gelco dampers. High-wind rain events in Tarrant County spring storms force moisture past the cap and onto the damper blade. The blade warps, then seizes shut. Smoke backs up into the house, and the fireplace becomes a carbon monoxide risk until the damper is replaced.
- Out-of-level Gelco chimney caps. Fort Worth’s expansive clay soils shift foundations with seasonal moisture swings. That movement transfers up through the chimney chase, leaving Gelco caps out of level and leaking at the mounting collar. It’s a soil problem, not just an age problem.
Gelco Service in Fort Worth: What Local Conditions Mean for Your Equipment
Here’s something most chimney companies won’t tell you. Fort Worth sits on expansive clay soil that swells when wet and shrinks when dry. Over years, that seasonal movement shifts foundations by fractions of an inch. It doesn’t sound like much until you notice your Gelco chimney cap leaning three degrees out of level and water pooling at the mounting collar.
We’ve opened up Gelco chases in neighborhoods across Fort Worth and found the same pattern: the cap’s lag screws have pulled loose from the chase top, the sealant has cracked, and rainwater has been leaking down the flue for months. Homeowners assume the cap is old. Often it’s the ground underneath the chase that moved. We check for soil-related cap shift on every Gelco service call in Fort Worth because skipping that check means replacing a cap without fixing the reason it failed. If we’re already out, we’re checking it. That’s the difference between a cleaning and our Chimney Inspection in Fort Worth.
Gelco Models & Products We Service in Fort Worth
We work on Gelco Model A prefabricated wood-burning fireplaces, Model B factory-built fireplaces, 2100 series gas fireplace inserts, and 3000 series wood inserts. For repairs, we source OEM Gelco dampers, caps, and firebox panels when they’re still in production. When a Gelco part is out of production, we use quality aftermarket gaskets and chimney caps that fit the original chase dimensions. We stock common Gelco-compatible components locally for faster turnaround on Fort Worth service calls.
We also emphasize chimney waterproofing, damper repair, and chimney cap replacement on Gelco systems because those are the three services that prevent the expensive failures down the road.
Gelco Service Pricing in Fort Worth
A standard Gelco chimney sweep and inspection in Fort Worth typically runs $189 to $329, depending on the unit type and access. If we find a damper that needs replacing on a Gelco prefab, that repair usually adds $220 to $410. Chimney cap replacement, including a stainless multi-flue cap and installation, runs about $350 to $650. Waterproofing a Gelco chase and crown typically adds $275 to $475.
What drives the cost is parts availability, unit condition, and whether an existing repair has made things worse. Every quote includes a written price before work starts, and a camera inspection with a photo report. You approve the number, we do the work, and the invoice matches. For a free estimate on Gelco service in Fort Worth, call (830) 251-4560.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Fort Worth
A Gelco prefab wood-burning fireplace in Fort Worth needs a cleaning at least once per year, and more often if you burn frequently or burn unseasoned wood. We recommend an annual sweep plus a Level 1 inspection, which means checking the firebox, damper, cap, and accessible flue sections. Call (830) 251-4560 to schedule yours, and we’ll give you a written price first.
Damp Fort Worth days often mean your Gelco damper has warped or the cap is letting moisture into the flue. When the damper won’t seal, smoke and humid outside air drift back down into the house. The fix is usually a damper repair or replacement and possibly a new cap. We’ll photograph the issue and show you exactly what’s causing the smell before we quote anything.
Sometimes, yes. Hairline cracks in the rear brick panel of a Gelco Model A are often repairable if the firebox structure is still sound. But if the cracking has reached structural panels or the flue, we’ll tell you honestly that a rebuild or replacement is the safer path. We never recommend a repair that leaves a fire hazard in your Fort Worth home.
Usually it’s a soil movement problem. Fort Worth’s expansive clay shifts with moisture, and that movement transfers up to the chase. A crooked Gelco cap means the mounting tabs have loosened or the chase itself has moved. We’ll level or replace the cap and check whether waterproofing is needed at the collar. Call (830) 251-4560 and we’ll take a look.
We service both. Gelco 2100 series gas inserts are common across Fort Worth, and we clean pilot assemblies, check gas connections, and verify proper venting on every gas insert call. The short answer is we work on whatever Gelco unit you have. For a quote, call (830) 251-4560.
Service Areas Near Fort Worth
We serve Fort Worth and the surrounding communities throughout the region. Our service area includes Los Angeles, Brooklyn, Houston, Queens, Manhattan, and Philadelphia. If you’re outside the immediate Fort Worth service area, call and ask, we’ll do our best to get a crew to you. For Gelco work specifically, we also cover Gelco service in Jacksonville and Gelco service in Austin. See our Fort Worth service area page for full coverage details.
Book Your Gelco Service in Fort Worth Today
If you’re in Fort Worth and your Gelco fireplace, insert, or chimney needs attention, call (830) 251-4560. We’ll schedule a service window, give you a written price before any work starts, and stand behind it with a full-year guarantee in writing. Tell me what you’re seeing, I’ll tell you what it means.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Fort Worth since 2002.