Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterChimney Company in Burbank, CA
Chimney cleaning in Burbank runs between $189 and $350 for a standard sweep, depending on the size of the firebox and how much creosote has built up. Homes here sit in the foothills below the Verdugo Mountains, and the mix of 1940s ranch houses and mid-century split-levels means we see everything from unlined masonry flues to newer prefab systems. Call (830) 251-4560 and we’ll give you a written price before any work begins.
Why Burbank Homes Are Different
Burbank’s housing stock skews older than most of the San Fernando Valley. The neighborhoods below the 134, especially around Magnolia Park and the streets north of Glenoaks, are full of homes built before 1960. Those chimneys were built with clay tile liners and brick that has now seen seventy winters of temperature swings. The summer heat in Burbank routinely climbs past 90 degrees, and that thermal expansion and contraction opens hairline cracks in mortar joints over time. When the rainy season arrives, those cracks let water in. What we find most often in Burbank is not creosote from a wood fireplace that gets used every night. It’s water damage to the crown and flashing that has gone unnoticed because the fireplace still drafts fine. Older Burbank homes also tend to have shallower fireboxes and shorter chimneys than what you find in newer developments, which means smoke can spill into the living room if the flue is not matched to the firebox opening. None of this is guesswork on a service call. We put a camera up the flue and show you exactly what is there before we recommend anything.
Our Main Burbank Services
Most Burbank homeowners call us for one of two reasons: the fireplace has not been cleaned in years and they want it safe for the season, or they want a written condition report before buying or selling a home. Here is what each job covers in Burbank.
Chimney Sweep in Burbank
A Chimney Sweep in Burbank removes the creosote and soot that accumulate on flue walls, then clears the smoke shelf and damper area where debris typically collects. In Burbank’s older homes, we also pull out the nests and yard debris that find their way in through uncapped chimneys near the foothills. The job takes about 60 to 90 minutes from setup to cleanup, and you get a written report showing what we removed and what condition the flue is in when we finish.
Chimney Inspection in Burbank
A Chimney Inspection in Burbank is a camera-based examination of the interior flue, looking for cracked tiles, gaps in mortar, hidden creosote, and any obstruction that could block the draft. Given how many Burbank homes were built before current code standards, we also check the clearance from the flue to the framing around it. Real estate transactions in Burbank move fast, and a Level 2 inspection is the one lenders and buyers most often require. We deliver the written report the same day.
Chimney Repair in Burbank
Chimney Repair in Burbank covers flue relining, crown rebuilding, firebox repair, and brick or mortar work on the exterior stack. In Burbank’s older homes, the two most common repairs we perform are stainless steel liner replacements using DuraFlex or Copperfield systems, and crown resealing where water has been pooling. Every repair from Flint Chimney Sweep carries a written 365-Day Done Right Promise. If a covered repair fails within one year, we return and fix it at no charge. The guarantee is in writing, not a verbal promise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Burbank
We work on and install the brands that hold up over time: DuraFlex, Copperfield, Famco, and HeatShield. Parts for these brands are stocked in our local inventory, so most Burbank repair jobs are completed in one visit. See our brands for the full list and specifications.
Pricing for Chimney Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Standard chimney sweep | $189 – $350 |
| Chimney sweep with minor smoke issues | $350 – $600 |
| Prefab/factory-built fireplace sweep | $300 – $800 |
| Wood stove sweep | $200 – $300 |
| Level 1 inspection | $75 – $150 |
| Level 2 inspection (including real estate) | $150 – $350 |
| Chimney cap installation | $185 – $500 |
| Chimney crown repair | $500 – $1,500 |
| Flue relining (stainless steel) | $1,500 – $5,000 |
| Firebox repair | $500 – $2,000 |
| Damper replacement | $250 – $600 |
Prices in Burbank tend to run toward the middle of these ranges, but the condition of the crown and the age of the original liner push some jobs higher. Whatever the number, it is on paper before we start. The price you approve is the price you pay.
Neighborhoods We Serve in Burbank
We work throughout Burbank, including these neighborhoods:
- Magnolia Park
- Rancho Adjacent
- Burbank Hills
- The Verdugo foothills above Glenoaks
- Media District residential blocks
We schedule Burbank jobs Monday through Saturday, and we can typically get to most calls within the week. If your chimney has an active leak, say so when you call and we will move you up the schedule.
Service Area – Cities Near Burbank
We also serve homeowners in Glendale, CA, West Hollywood, CA, Altadena, CA, and Beverly Hills, CA. Dispatch and scheduling are coordinated from our Los Angeles office, but the crews you’ll see in Burbank work the Valley and foothill areas regularly.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Burbank
Most Burbank sweep and inspection appointments are scheduled within three to five business days. Repairs depend on which materials your chimney needs, but common jobs like cap installation and crown resealing are usually done the same week. Call (830) 251-4560 and the live person on the phone will give you a specific window.
Routine sweeping and Level 1 or Level 2 inspections never require permits. Structural repairs like a full rebuild or a new liner can require a permit depending on the scope, and we will tell you that up front in writing before any work is scheduled. We handle the paperwork when a permit is required.
All of it. From the flats off Burbank Boulevard up to the hillside streets above Glenoaks, we cover every Burbank ZIP code with the same crew and the same written guarantee. If we are already on a job near Magnolia Park or the Rancho, we can often add a same-week appointment nearby.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Rebuilt the crown on our chimney where water had been getting in. Neat masonry and a fair price."
- Eddie J."Very respectful, wore boot covers, laid drop cloths. Left no soot."
- Jan S."Level 2 inspection before we bought the house. Report was detailed and saved us from a bad surprise."
- Archie M.