Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Nashville-Davidson?
A standard chimney sweep in Nashville-Davidson typically runs $150 to $300, with most single-flue masonry fireplaces landing near $185 to $225. If the technician finds creosote buildup above Level 2 or a nest blocking the flue, the job climbs toward $350 to $500. We write the price on paper before any tool comes off the truck, so the number you approve is the number on the invoice.
That’s the short version. The longer version depends on your chimney type, how long it’s been since the last sweep, and what Nashville’s climate has done to it since then. This guide breaks down every line item we see on jobs across Davidson County in 2026, so you can plan the expense instead of guessing.
- Typical sweep: $150 – $300
- Heavy creosote or blockage: $350 – $500
- Sweep plus Level 2 inspection: $350 – $600
- Written price before work starts: always, on every job
- Repair guarantee: one full year, free return visit if a covered repair fails
Chimney Cleaning Cost Breakdown (2026)
Below is the pricing we quote in the Nashville-Davidson market. These ranges reflect real line items, not national averages pulled off a template. If your chimney needs something that isn’t on this list, you’ll see that price in writing before we start.
| Service | Typical Price Range | Notes |
|---|---|---|
| Standard chimney sweep (single flue) | $150 – $300 | Masonry fireplace, light to moderate soot |
| Sweep with heavy creosote removal | $350 – $500 | Level 3 creosote, glazed or tar-like |
| Multi-flue sweep | $225 – $425 | Add $50 – $90 per additional flue |
| Wood stove or insert sweep | $200 – $375 | Baffle removal and reinstall included |
| Animal nest or debris removal | $200 – $450 | Often paired with a cap install |
| Level 1 inspection | $75 – $150 | Visual, accessible areas only |
| Level 2 inspection | $185 – $400 | Includes camera scan and attic/crawlspace check |
| Sweep + Level 2 inspection bundle | $350 – $600 | Most common package we write |
| Chimney cap installation | $150 – $450 | Stainless single-flue or multi-flue |
| Flue relining (per foot) | $45 – $95/ft | DuraFlex and Olympia Chimney stainless liners |
| Masonry crown repair | $300 – $900 | Depends on crack extent and access |
| Damper replacement | $250 – $650 | Top-sealing dampers run at the higher end |
What drives the price up or down on a Nashville-Davidson chimney? Mostly three things: creosote grade, access, and whether the flue is lined properly. A chimney burning seasoned hardwood with a clean liner and a working cap stays in the $150 – $250 range for years. A chimney that’s been burning green wood in a 1950s Inglewood bungalow with a cracked clay tile liner is going to look very different when we put a camera down it.
Roof pitch matters too. Nashville has a lot of steep-roofed homes in areas like Forest Hills and Belle Meade, and steep pitch means more setup time, more safety gear, and higher labor. A straight-forward ranch in Antioch with a low-pitch roof takes less time. That difference shows up in the quote.
What Affects Chimney Cleaning Pricing in Nashville-Davidson
Six factors move chimney cleaning pricing more than anything else. Here’s how each one plays out in this market.
- Creosote grade. Level 1 is a light, flaky soot that brushes off easily. Level 2 is denser and takes rotary tooling. Level 3 creosote is glazed, tar-like, and bonded to the flue wall; removing it safely is a $350 – $500 job on its own, and we won’t cut corners because doing so risks a chimney fire.
- Chimney type. A masonry fireplace in a brick home is the baseline. Factory-built and metal chimneys (common in newer build subdivisions across Nolensville Road and Cane Ridge) have different interior geometry and often need specialty brushes.
- Fuel type. Wood-burning fireplaces in 12 South and East Nashville produce more creosote than gas logs. Pellet stoves fall in between. Gas appliances burn cleaner but still need annual service to check for liner corrosion and blockages.
- Access and roof pitch. Steep roofs, tight alleys, and chimneys tucked behind dormers or HVAC equipment all increase labor time. A chimney accessible from a second-story flat roof is priced differently than one requiring staging on a steep slope.
- Time since last sweep. A chimney cleaned every year stays in the low range. One that hasn’t been touched in four or five years almost always lands in the mid to upper range once we account for buildup depth.
- Nashville’s climate. This is a real factor here. Middle Tennessee humidity combined with freeze-thaw cycles in January and February opens small cracks in masonry crowns and flue tile joints. Water gets in, creosote sticks harder, and the next sweep is tougher. We see more crown and liner repairs in Davidson County than in drier markets, and we see them most often after a wet winter.
If you want a straight answer on your specific chimney rather than a range, call (830) 251-4560. A live person answers 24 hours a day, and we’ll schedule a free estimate.
How to Save on Chimney Cleaning
You don’t have to overpay to keep a chimney safe. Here’s what actually works, based on what we see across Nashville-Davidson.
- Bundle the sweep with the inspection. A standalone Level 2 inspection runs $185 – $400. Paired with a sweep, most homeowners pay $350 – $600 total instead of $335 – $700 separately.
- Sweep every year. Annual maintenance keeps you in the $150 – $250 bracket. Neglect pushes you into the $350 – $500 bracket just to catch up. That’s a $200 difference year over year for the same chimney.
- Burn seasoned hardwood. Wood dried for at least six months produces less creosote. Green wood from a cheap lot costs less up front and more at the sweep.
- Install a cap before you need one. A $150 – $450 cap keeps rain, birds, and squirrels out of the flue. Cleaning up after a chimney swift nest costs more than the cap did.
- Watch the crown. If you can see cracks from the ground, get them sealed early. Crown repair at $300 – $900 beats a rebuilt crown and a water-damaged flue.
- Ask for the written price up front. This should be standard. If a company won’t put the number in writing before they start, that’s your signal to move on.
None of these tips require special tools or a background in the trade. They’re just habits that keep Nashville-Davidson chimneys in the low cost bracket. For a free estimate on your chimney, call (830) 251-4560 and we’ll walk you through what we found and what it costs before anyone picks up a brush.
FAQs – Chimney Cleaning Cost
How much does a chimney sweep cost in Nashville-Davidson?
A standard chimney sweep in Nashville-Davidson costs $150 to $300, with most single-flue masonry fireplaces landing around $185 to $225. If there’s heavy creosote, an animal nest, or a damaged liner that needs attention, expect $350 to $500 or more. Call (830) 251-4560 for an exact quote – estimates are free, and the price you get is the price you pay.
Is chimney cleaning really necessary every year?
Yes, for any chimney that sees regular use. Annual cleaning keeps your cost in the $150 – $250 range and catches liner cracks, crown damage, and creosote buildup before they turn into $1,000+ repairs. Nashville’s humidity and freeze-thaw cycles make annual inspections more important here than in drier parts of the country. To book a sweep, call (830) 251-4560.
How much does a Level 2 chimney inspection cost in Nashville-Davidson?
A Level 2 inspection runs $185 to $400 in this market, and a sweep-plus-inspection bundle typically lands between $350 and $600. Level 2 is the right choice after a chimney fire, when you buy a home, or if you’ve noticed a change in how the fireplace draws. Call (830) 251-4560 to schedule one.
Can you clean my chimney the same day I call?
Often yes, especially for standard sweeps on masonry fireplaces. Same-day slots depend on the day and your location within Davidson County, but we keep our schedule flexible and a live person answers every call 24 hours a day. Call (830) 251-4560 to find out what’s open today.
What’s the difference between a $150 sweep and a $500 sweep?
The difference is creosote grade, chimney type, and access. A $150 – $250 sweep covers a lightly soiled masonry flue in an accessible location. A $350 – $500 job involves Level 3 glazed creosote, rotary tooling, or a flue that’s been neglected for years. Every job gets a written price before we start, so there’s no surprise on the invoice. Call (830) 251-4560 for a firm quote on your specific chimney.
Safety Note on Chimney Work
One thing worth stating plainly: chimney cleaning is not a do-it-yourself task, and we don’t recommend treating it as one. The two real dangers are falls from the roof and exposure to creosote dust, which is a known carcinogen. Add in the fact that a blocked or cracked flue can push carbon monoxide into the living space, and the case for hiring a trained, insured professional writes itself. Our technicians are uniformed and background-checked, and we carry the safety gear that makes the job safe on any roof pitch in Davidson County. If your chimney hasn’t been inspected in years, or if you’ve noticed a change in how it draws, call us before burning another fire.
Why Homeowners Call Flint Chimney Sweep
Flint Chimney Sweep is part of the Garrison Partners family of independently owned chimney service companies, founded in 2002. We operate under The Garrison Standard, the same code every Garrison Partners location follows. That means three things on every job, no exceptions.
- A written price before any work starts. You approve the number first. The invoice matches what you approved.
- The 365-Day Done Right Promise. Every repair carries a written guarantee valid for one full year from the service date. If a covered repair fails within that year, we come back at no charge. No argument, no fee.
- A live person on the phone, 24 hours a day, 7 days a week. No voicemail trees, no callback forms, no waiting until Monday morning.
We install professional-grade chimney materials specified by job, not by margin: DuraFlex and Olympia Chimney stainless liners, HeatShield resurfacing systems, Gelco and Copperfield components, and Famco caps and accessories. If we’re putting something in your chimney, we’ll tell you the brand and why we chose it.
Explore more from our home page to see how we work.
Pricing for every job is set in writing before the first tool comes off the truck. Estimates are free. Call (830) 251-4560 and a live person will help you schedule.
Written by Hank Delano, Owner at Flint Chimney Sweep, part of the Garrison Partners family, serving Nashville-Davidson from 2002.
Pricing reflects the Nashville-Davidson market as of 2026. Flint Chimney Sweep offers free estimates – call (830) 251-4560.
What Our Customers Say
"Full inspection with a camera. Found a cracked flue tile and quoted the repair clearly. Did not push."
- Lydia C."Great sweep. Only thing, the appointment window ran long and I waited. Cleanup was spotless though."
- Marge P."Sweep showed up on time, in uniform, and ran a tight job. Cleaned the flue, inspected the firebox, and gave me a short written report. Veteran-run and it shows."
- Walt R.