Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Foxborough
A chimney inspection in Foxborough costs between $189 and $529 depending on the level of inspection, and a Level 1 inspection on a fireplace you use regularly should happen once a year. If you’re buying a home near the Common, selling a colonial off South Street, or haven’t had the flue looked at in years, we’ll schedule an inspection, put the price in writing before any work starts, and hand you a photo report so you can see exactly what we saw. Call (830) 251-4560 and you’ll get a live person on the line, not a voicemail tree.
Flint Chimney Sweep has been part of the Garrison Partners family since 2002. Every inspection in Foxborough is performed by a background-checked, uniformed technician, and every repair carries a written guarantee valid for one full year. The number you approve before we start is the number on the invoice. That’s the Garrison Standard, and we don’t make exceptions for it.
Key Takeaways
- A Level 1 chimney inspection in Foxborough runs $189 to $289; Level 2 runs $329 to $529.
- We use a camera on every Level 2 inspection and on any Level 1 where we see a reason to look deeper.
- You get a written price before any work begins, and a photo report after the inspection.
- Every repair carries a 365-Day Done Right Promise: if a covered repair fails within one year, we return at no charge.
Why Flint Chimney Sweep Is Foxborough’s Preferred Chimney Inspection Company
Foxborough homeowners don’t need another chimney company that shows up late and hands over a scary quote with no way to check it. What they need is a crew that runs on discipline. We schedule a window, we arrive inside it, and we hand you a written price before a single tool comes off the truck. Hank Delano, who leads our inspection work, has built the Foxborough service around one rule: nothing gets recommended without camera evidence you can see on our monitor or in the photo report we leave with you.
The town’s housing stock demands that kind of discipline. The center-village colonials around the Common often hide multiple flues behind one wall, while the ranch and split-level homes out toward Route 140 usually run a single factory-built metal flue. Those are two different inspection protocols, and a company that treats every Foxborough home the same is going to miss something on one of them.
We also answer the phone with a live person 24 hours a day, seven days a week. If you call on a Sunday evening with a question about a rust stain on your smoke chamber wall, you’ll talk to a human, not a callback form.
Chimney Camera Inspection in Foxborough
A chimney camera inspection in Foxborough means running a high-resolution camera up the full length of the flue so we can see exactly what’s happening inside the liner, the smoke chamber, and around any offsets the flue makes through the house. It’s the only way to catch spalled clay liners, cracked mortar joints, or a third-degree creosote glaze that a standard brush-and-rod sweep would miss. For a Foxborough homeowner, this matters most when a home has been sold, when a liner is old enough to be original, or when a ground-level visual inspection raises a question that can only be answered from inside the flue.
What Shows Up on the Camera Report
We were called to a 1920s colonial near Foxborough Common where the homeowner hadn’t had the chimney looked at in 14 years and was seeing a rust stain on the smoke chamber wall. Our tech ran a Chimney Camera Inspection and found that the original clay flue liner had spalled in the upper two sections. You could see the crumbling terra cotta on the monitor, while the lower flue was clear of anything past first-degree creosote. We brushed the firebox and lower flue, documented the liner damage with a photo report, and gave the homeowner a written HeatShield resurfacing quote so they could decide on their own schedule rather than being pushed into it on the spot.
When We Add It to a Level 1
When we find creosote buildup we can’t see past, signs of moisture inside the firebox, or a cap that’s rusted through, we add the camera feed to the inspection rather than guess. On a Level 2 inspection, the camera is standard. The footage is saved and included in your photo report, so you’re looking at the same reason we’re making any recommendation.
A camera inspection as part of a Level 2 typically runs $329 to $529 in Foxborough. We don’t upsell the camera as a line item; when it’s needed, it’s part of the inspection we perform.
Fireplace Inspection in Foxborough
A fireplace inspection in Foxborough checks the firebox, damper, smoke chamber, and the flue above them for creosote, cracks, and anything that could let heat or gases escape into the house. If you burn fires through a New England winter, you should have this done every year even if the fireplace seems fine. If you only light the fireplace occasionally, every other year might be reasonable. But if you’ve never had the chimney looked at since you moved in, don’t put it off another season.
What the Damper Tells Us
The damper is the first thing we check. A rusted or warped damper can let conditioned air leak out of the house all winter and can signal that rain has been running down the flue. On Foxborough’s older capes and colonials, we see plenty of dampers that have been sitting half-open for years because a previous owner didn’t know it mattered.
Firebox and Smoke Chamber
Cracks in the firebox brick or a smoke chamber that’s coated in creosote are the findings we document for you. A cracked firebox in a home near Wading River Road is often a different problem than one near Gillette Stadium, but the fix is the same: document it, explain it, and give you a written quote if it needs repair. No pressure.
A fireplace inspection alone runs $189 to $289 for a Level 1. If we add the camera because the condition calls for it, that moves the job to Level 2 pricing.
Trusted Brands We Service in Foxborough
When a repair is needed, we use HeatShield for resurfacing damaged flue liners and Olympia Chimney for caps and termination hardware. We keep common parts for Foxborough’s older masonry chimneys on the truck so a simple cap replacement doesn’t turn into a two-week wait. For factory-built metal flues in the ranch homes and split-levels off Route 140, we’re familiar with the standard brands and can source what’s needed quickly. Our techs are trained on Gelco and Famco components as well, but the brand follows the job; we don’t pad a quote with a marked-up part we could have gotten for less.
Common Chimney Inspection Problems We See in Foxborough Homes
- Missing or rusted caps: The older center-village homes around the Foxborough Common frequently have caps that are rusted through or missing entirely. Rain runs straight down the flue and accelerates spalling of the clay liner, and a visual inspection from the ground won’t catch it. Only a camera sees that damage.
- Spalled clay liners: Wind-driven rain off the Neponset River lowlands toward the open caps and older masonry is a recurring source of interior flue damage. The terra cotta liner crumbles, and the fragments can collect at an offset and create a blockage.
- Third-degree creosote glaze: This tar-glazed stage of creosote cannot be removed with a brush. A sweep that skips the camera and just runs a rod down the flue leaves the homeowner with a false all-clear and a continuing chimney fire risk. We look for it every time.
- Neglected factory-built flues: In the newer ranch and split-level developments, homeowners assume a metal chimney needs no annual service. The flue liner and cap still need a Level 1 inspection every year per NFPA 211, and the damper and firebox still collect creosote.
Pricing for Chimney Inspection in Foxborough, MA
A Level 1 chimney inspection in Foxborough runs $189 to $289 and is the right call for an annual checkup when nothing has changed. A Level 2 inspection runs $329 to $529 and is required for real estate transactions, after a chimney fire, or if you’ve made any change to the heating system that uses that flue. If we find a problem that requires a camera during a Level 1, we’ll show you why and move to Level 2 pricing with your approval.
If you’re selling a home in Foxborough, the buyer’s inspector will almost certainly flag the chimney. That’s when a Level 2 with a written photo report pays for itself. If you’re buying, the same report tells you whether the liner needs work before closing. Call (830) 251-4560 for an exact quote. Estimates are free.
We Also Serve Cities Near Foxborough
Our Chimney Inspection team covers Foxborough and the surrounding towns. If you’re in Boston, Worcester, Cambridge, or Lowell, we’ll schedule the same upfront written pricing and camera-backed photo report we provide here in Foxborough. Dispatch and scheduling are coordinated from our Boston office, and crews serve the Foxborough area locally. Call (830) 251-4560 and we’ll get you on the calendar.
For more about how we work in this corner of Massachusetts, see Chimney Inspection in Foxborough.
Serving Foxborough, MA - Our Local Coverage Area
We’re based in the Foxborough area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Foxborough
Once a year if you burn fires through the winter, per NFPA 211. If you only use the fireplace occasionally and nothing has changed with the heating system, every other year is usually enough. Houses near the Common with original masonry chimneys should lean toward annual because wind-driven rain and open caps cause damage that you won’t see from the ground. Call (830) 251-4560 and we’ll help you figure out the right interval for your specific chimney.
A Level 1 looks at the readily accessible parts of the chimney and flue when nothing has changed. A Level 2 adds a camera sweep of the full flue and is required for real estate sales, after a chimney fire, or after a change to the heating system. A Level 3 is uncommon and only comes up when a Level 2 suggests serious damage that may require accessing the flue through the wall. Most Foxborough homeowners need Level 1 or Level 2. We’ll tell you which level your situation calls for before we start, and you’ll know the price before the tools come off the truck.
Yes. A Level 1 inspection is $189 to $289. A Level 2 with camera is $329 to $529. That price is put in writing before any work begins, and the number on the invoice is the number you approved. If we find something during the inspection that needs repair, you’ll get a written quote with the exact materials and cost, and you decide whether to proceed. Call (830) 251-4560 for a free estimate on the inspection itself.
If the creosote is first-degree and brushable, if the damper works, and if the liner is intact on camera, the chimney can wait until the service interval. Flaking or spalled liner, a tar-glazed third-degree creosote deposit, or a rusted-through cap should not wait because those conditions can allow a chimney fire or carbon monoxide to back up into the house. We’ll tell you plainly which category your chimney falls into, and we’ll show you the camera footage so you can see it yourself.
We use a camera on every Level 2 and on any Level 1 where we see a reason to look deeper. If you’ve had a no-camera sweep from another company, that job missed what a camera would have caught. In Foxborough, where original clay liners are common in the older center-village homes, the camera is the only way to know if the liner has spalled. You get the photo report either way.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Foxborough since 2002 as part of the Garrison Partners family.





Before
After
Before
After
Before
After