Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Inspection Across Gladeview
A chimney inspection in Gladeview typically runs $189 – $549 depending on the level, and what most homeowners here actually need is a Level 2 with a camera. We book inspections across Gladeview every week and can usually get a technician to your door within a few days, not weeks. Call (830) 251-4560 for a written price before anything goes up on your roof.
We know Gladeview chimneys don’t get the same workout as ones up north. What they do get is humidity, salt air, and long stretches of sitting idle, which is exactly why a proper camera inspection matters more here than most homeowners expect. Hank Delano runs our inspection crews, and he’ll tell you straight: the problem most people find isn’t creosote. It’s rust and moisture damage that no one saw coming.
Why Flint Chimney Sweep Is Gladeview’s Preferred Chimney Inspection Company
We’ve been inspecting chimneys in Gladeview long enough to know the housing stock. Ranches from the 1950s and 60s near NW 27th Avenue, newer homes off NW 71st Street, and a fair number of properties around Liberty Square that changed hands and never had the chimney touched. Every inspection gets a written report with photos. You see exactly what our camera sees, and nothing gets recommended unless you can look at the evidence yourself.
Our inspectors are background-checked and uniformed, so when you open the door near NW 103rd Street or anywhere else in Gladeview, you know who you’re letting in. The number on your invoice is the number you approved before we started. That’s not a sales pitch. It’s how we’ve operated since 2002 as part of the Garrison Partners family, and it’s what The Garrison Standard requires of every location.
Reviews from Gladeview customers mention the same things over and over: we show up inside the window, we put the price in writing first, and we don’t sell a liner replacement unless the camera footage proves it. If you want a second opinion on what another company told you, we’ll give you one, and we’ll show you the photos to back up whatever we say.
Chimney Camera Inspection in Gladeview
A Chimney Camera Inspection in Gladeview runs between $249 and $349 and is the single most useful service we offer in this market. We run a high-resolution camera up your flue and record what’s actually there: cracked tiles, rusted dampers, animal nests, creosote buildup, or nothing at all. You get the footage alongside the report, so the recommendation is never just our word.
In Gladeview’s marine air, metal components corrode faster than they do inland. A camera inspection after a summer of humidity or a rough storm season is how you catch a rusted damper before it falls apart or a hairline crack before it becomes a fire path.
When To Schedule One
If you haven’t burned in over a year, the assumption is often that the chimney is fine. That assumption is wrong here. Moisture keeps working even when the flue is cold. Schedule a camera inspection before the first burn of the season, after any named storm passes through, or before you buy or sell a home in Gladeview.
Real Estate Inspections
For Gladeview home sales, we perform Level 2 camera inspections that satisfy most buyer’s requests and insurance requirements. The seller gets a written report with photos. The buyer gets proof of condition. Nobody has to guess.
Fireplace Inspection in Gladeview
A Fireplace Inspection in Gladeview covers the firebox, damper, smoke chamber, and visible masonry, and typically runs $189 – $279. This is the inspection that tells you whether your fireplace is safe to light right now, and whether the moisture that’s been chewing on Gladeview masonry all summer has done anything that needs attention.
We were called to a 1950s ranch-style house near the intersection of NW 27th Avenue and NW 119th Street, where the homeowner mentioned a musty smell and a damper that hadn’t moved in years. Our tech ran a Level 2 inspection with a camera and found the damper had rusted open, letting humid air flow freely into the firebox and flue. After a thorough cleaning, we applied a HeatShield liner repair to the spalling smoke chamber and replaced the damper. No more smell, and the chimney was back to safe operation without a full rebuild.
What Gets Checked
We check the firebox bricks for spalling and cracks, the damper for rust and movement, the smoke chamber for gaps, and the flue for blockage. In Gladeview, we pay special attention to the damper because salt-laden air is hard on the metal, and a damper that won’t close lets humidity straight into the house.
When A Fireplace Inspection Is Enough
If you burn occasionally and your chimney has been maintained, a fireplace inspection may be all you need. If we find anything questionable during the look, we recommend a camera inspection before you light the next fire. You’ll know the cost before we do either one.
Trusted Brands We Service in Gladeview
We inspect and service fireplaces and chimneys built around components from Olympia Chimney, Famco, and Copperfield, and we work with DuraFlex when a liner needs replacing. Because Gladeview’s moisture issues often mean damaged dampers and smoke chambers rather than burned-out bricks, we keep the parts that fail most often here stocked locally. That means faster turnaround than waiting on a shipment, and a written price for the repair before we order a single part.
Common Chimney Inspection Problems We See in Gladeview Homes
- Rusted dampers in idle chimneys. A fireplace that hasn’t been lit in years still has a metal damper sitting in humid air. Gladeview’s marine climate rusts them open or seizes them shut, and you won’t know until the inspection finds it.
- Spalled firebox bricks and crumbling crowns. Moisture absorbs into masonry, and the salt in coastal air accelerates the breakdown. Brick faces flake off, mortar fails, and water works its way deeper every season.
- Animal nests in the flue after long vacancies. Birds and small animals find their way in during months when no fire is burning. A nest is a chimney fire waiting for a spark, and a camera inspection is the only way to see it without running a sweep.
- Third-degree creosote in chimneys that do get used. This is tar-hard glaze that a brush won’t remove. It needs chemical treatment, and in some Gladeview homes it’s the result of burning unseasoned wood or running low, smoldering fires.
Pricing for Chimney Inspection in Gladeview, FL
A Level 1 inspection in Gladeview runs $189 – $249 when performed alongside a sweep. A Level 2 camera inspection runs $249 – $349, and that’s the most common service we book here because of the moisture problems in older homes. Full Level 3 inspections, which involve opening walls or masonry, run $549 and up depending on what has to be accessed. Every inspection gets a written price before we start. Every report includes photos. No surprises, no upgraded invoice at the door.
Call (830) 251-4560 and we’ll quote your inspection over the phone. The estimate is free, and the number we quote is the number you pay.
We Also Serve Cities Near Gladeview
Flint Chimney Sweep provides Chimney Inspection and full chimney services to homeowners across South Florida. If you’re outside Gladeview, our crews also cover areas around Jacksonville, Miami, Tampa, and Orlando. For the full picture of what we do in this part of the state, see Chimney Inspection in Gladeview and the surrounding communities we serve.
Serving Gladeview, FL - Our Local Coverage Area
We’re based in the Gladeview area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Gladeview
Once a year, and that’s a straight answer. In Gladeview’s humid, salt-laden air, metal and masonry degrade whether you burn or not, so the annual inspection is as much about rust and moisture as it is about creosote. If you use the fireplace regularly, get it swept and inspected before the season starts. If it sits idle, still get the inspection, because that’s when dampers rust and critters move in. Call (830) 251-4560 to schedule yours, and we’ll give you a written price before we come out.
A Level 1 is a visual check of all accessible parts: firebox, damper, smoke chamber, flue entrance, and exterior. It’s fine for a chimney that’s been used regularly and has no history of problems. A Level 2 adds a camera run through the full flue, which is what we recommend for most Gladeview homes because of the moisture-related damage we find even in chimneys that haven’t burned in years. A Level 2 is also the standard for real estate transactions and after storms. Call (830) 251-4560 and we’ll tell you which level your chimney actually needs.
Not reliably, and no honest company should claim otherwise. Third-degree creosote looks like a hard, shiny, tar-like glaze, but you can’t see where it builds up in the middle of a flue without a camera or a good set of eyes on a ladder. In Gladeview, we run the camera on any inspection where you’ve been burning wood, because the difference between brushable creosote and a glaze that requires chemical treatment or a liner replacement is a decision you should make with evidence, not a guess. Call (830) 251-4560 for a camera inspection with a written report and photos.
Water in the firebox, a musty smell from the fireplace, loose bricks or mortar on the exterior, or any new sound when wind blows across the flue. South Florida storms can drive rain sideways and leave water inside the chimney through a cracked crown or damaged flashing, so if any of those signs show up after a storm, get the chimney looked at before you burn again. Call (830) 251-4560 and we’ll inspect it and show you the photos.
First-degree creosote is a light, flaky, brushable layer, and it’s the least dangerous form of buildup, but it still needs to come off before you burn on top of it. We can usually remove it during the same visit as the inspection, and we will tell you the sweep cost before we start. What you should not do is leave it there and run hot fires, because creosote doesn’t improve with age. Call (830) 251-4560 to schedule the inspection, and we’ll have a sweep price ready if it’s needed.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Gladeview and South Florida since 2002 as part of the Garrison Partners family.
Call (830) 251-4560 for a free estimate on a chimney inspection in Gladeview. A live person answers, day or night, and you’ll get a written price before any work begins.