Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Inspection Across Hunters Creek
A chimney inspection in Hunters Creek typically runs $189 – $429 depending on the level, and we book most inspections within 5 to 7 business days. Level 1 runs $189, Level 2 with camera work runs $329, and a full Level 3 after a chimney fire or structural event runs $429. That’s the price you approve before we dispatch, not a starting point that moves once we’re on your driveway. Call (830) 251-4560 to get your inspection on the calendar.
We know Hunters Creek because we work Hunters Creek. The subdivisions off Town Center Boulevard, the homes tucked back near Hunter’s Creek Golf Club, the cul-de-sacs around Flora Vista Drive. These are mostly 1980s and 1990s builds with factory-built metal fireplaces and flue liners that have never been camera-inspected since the day the drywall went up. This page tells you exactly what we look at, what it costs, and what you get in writing before any work starts.
Why Flint Chimney Sweep Is Hunters Creek’s Preferred Chimney Inspection Company
Flint Chimney Sweep operates under The Garrison Standard, the same code every Garrison Partners location follows. That means a written price before any work starts, background-checked and uniformed technicians on every call, and the 365-Day Done Right Promise backing every repair in writing for a full year. We’ve been part of the Garrison Partners family since 2002.
Hunters Creek homeowners call us because we hand over camera photos, not opinions. If a liner has a crack, you see the crack. If the damper is rusted, you see the rust. We don’t ask you to trust a verbal assessment. We hand you the evidence and let you decide. The price we quote over the phone is the price on the invoice, and if a covered repair fails within the guarantee period, we return at no charge.
Chimney Camera Inspection in Hunters Creek
A Chimney Camera Inspection in Hunters Creek is a Level 2 inspection, and it’s the one we recommend for nearly every home here because of what the housing stock actually is: original factory-built metal fireplaces with flue liners installed as part of the subdivision build. Visual only doesn’t cut it. The camera goes up the flue and records every inch of liner wall, every joint, every rust line.
The Hunters Creek difference is age and inactivity. These chimneys are 25 to 40 years old and many have burned fewer than 50 fires in their entire life. That sounds like good news, but it means creosote hardens into a glaze that won’t brush off, and moisture works on the liner from the outside every single summer. A camera inspection shows what a look-down cannot.
- Inspection Level 1 (visual): $189
- Inspection Level 2 (camera): $329
- Inspection Level 3 (structural, post-event): $429
What the camera sees
The camera documents the full flue run: liner material, joint integrity, rust, creosote thickness, animal nesting, and any separation where sections meet. On Hunters Creek’s original factory-built systems, the most common finding is rusted joints between liner sections and a damper plate that no longer opens fully. We photograph it all and hand you a written report with the images.
When you need it
If your chimney hasn’t been inspected in three or more years, you need a camera inspection. If you’re buying or selling a home in Hunters Creek, a Level 2 is standard for real estate transactions and we provide the photo report same visit. If you’ve burned more than a cord of wood since the last sweep, book the camera inspection with a sweep at the same time.
Fireplace Inspection in Hunters Creek
A Fireplace Inspection in Hunters Creek covers the firebox, the damper, the hearth, the surround, and the chimney system from throat to cap. Most Hunters Creek homes have zero-clearance factory-built fireplaces with a thin refractory panel lining the firebox rather than full masonry brick. Those panels crack over time, and a cracked panel isn’t cosmetic. It lets heat reach the wood framing behind it.
We inspect the firebox for spalling in brick or cracked refractory panels, the damper for full range of motion, the hearth for proper clearance dimensions, and the entire flue above it. On homes off Hunters Creek Boulevard and the Cane Island area, we routinely see firebox panels with hairline cracks that homeowners never noticed because they only look at the flames, not the walls behind them.
Firebox and refractory panels
Factory-built fireplaces have a lifespan, and the panels inside are a wear item. Once cracked or crumbling, the fireplace is not safe to burn. The fix is panel replacement, not patching. We carry Copperfield and Famco replacement panels and specify materials by the job, never by what’s in the truck already.
Damper and draft checks
A damper that doesn’t open fully is a carbon monoxide risk and a draft problem. We open, close, and inspect the full throw on every damper we encounter. Rusted damper assemblies are common in Hunters Creek because Central Florida humidity gets into the flue through degraded caps and crowns. Freeing and lubricating a stuck damper takes minutes and makes the fireplace usable again.
Trusted Brands We Service in Hunters Creek
We stock and install components from brands your chimney was likely built with in the first place. DuraFlex liners, Famco dampers and caps, Copperfield refractory panels. These are professional-grade materials specified by job, not by what’s on sale. If your factory-built flue liner needs replacing, we’ll quote a DuraFlex system and show you the spec sheet before you spend a dollar. Hunters Creek homeowners get the same materials our techs would put in their own homes.
Common Chimney Inspection Problems We See in Hunters Creek Homes
- Cracked flue liners from original subdivision builds. Homes built in Hunters Creek during the 1980s and 1990s shipped with factory-installed liners that are now decades past their intended service life. A camera inspection shows rusted joints and hairline cracks that a visual check cannot see.
- Spalling firebox brick and cracked refractory panels. The firebox takes direct heat every burn, and Central Florida’s humidity works its way in when the fireplace sits idle for months. Cracked panels or flaking brick mean the fireplace is unsafe until repaired.
- Degraded chimney caps and crowns from humidity and rain. Hunters Creek gets heavy summer rain and high humidity year-round. Water enters through worn caps, runs down the flue, and accelerates corrosion at every joint. The cap is not cosmetic.
- Glazed creosote and animal nesting from disuse. A fireplace that hasn’t burned in years doesn’t mean a clean flue. It usually means a hardened creosote glaze and sometimes a squirrel or bird nest inside the flue. Both are fire hazards and both need removal before the next burn.
Pricing for Chimney Inspection in Hunters Creek, FL
A Level 1 visual inspection in Hunters Creek runs $189. A Level 2 camera inspection runs $329 and includes the full photo report. A Level 3 inspection, which we perform after a chimney fire or suspected structural damage, runs $429. These are flat prices, not estimates. If the inspection turns up a repair need, you’ll get a separate written quote for the repair. You approve it or you don’t. The inspection price never changes.
What affects cost beyond the inspection level is whether we are also sweeping while we’re there, and whether the home has multiple flues or an unusually tall chase. We’ll tell you all of that over the phone before we book. Call (830) 251-4560 for a firm price on your inspection.
We Also Serve Cities Near Hunters Creek
Our Chimney Inspection team serves Hunters Creek and the surrounding Central Florida metro. If you’re in Jacksonville, Miami, Tampa, or Orlando, we can schedule Chimney Inspection in Hunters Creek or your own neighborhood with the same flat pricing and written guarantee. Dispatch and scheduling are coordinated from our South Florida office, and crews serve Hunters Creek locally.
Serving Hunters Creek, FL - Our Local Coverage Area
We’re based in the Hunters Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Hunters Creek
No, you do not need a Level 2 camera inspection every year if the fireplace sits unused and the liner was found to be in good condition within the last two years. A Level 1 visual check every other year is sufficient for a lightly used fireplace. If you burn regularly, sweep it annually and run the camera every two years. The risk in Hunters Creek is not frequency of use; it’s moisture and age working on liners that never get looked at. Call (830) 251-4560 and we’ll tell you honestly what your situation calls for.
A Level 1 is a visual inspection of the accessible parts of the fireplace and chimney, no camera. A Level 2 adds a camera run up the full flue and is required for real estate transactions, after any chimney fire, or when the system hasn’t been inspected in more than two years. On Hunters Creek’s original factory-built chimneys, we recommend Level 2 for most first visits because the liners are all 25+ years old and visual alone cannot show joint rust or liner cracks.
If you burn a cord of wood or more per season, sweep it once a year. If you burn less, every two years still makes sense because creosote hardens with time even without new buildup. Hunters Creek has no real burn season, so fireplaces sit idle for months, and that idle time is exactly when glazed creosote and nesting become problems. A sweep is $189 – $249 depending on flue condition, and it is cheap insurance against a chimney fire.
Yes. Every inspection gets a written price before we schedule the dispatch. Level 1 is $189, Level 2 with camera is $329, Level 3 is $429. That is the number you approve. If the inspection reveals a needed repair, we hand you a separate written quote with photo evidence, and you decide. No price moves once we’re on site. That’s The Garrison Standard and it applies on every single call.
The photo report shows you the interior of your flue in color images: liner walls, joints, any rust, any creosote thickness, any nesting, and the damper from below and above. You’ll see exactly what our tech saw. If we tell you a liner needs replacing, the report shows you the crack or rust line that led to that conclusion. Nothing is recommended without camera evidence you can see for yourself. That’s the whole point.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Hunters Creek and Central Florida since 2002 under The Garrison Standard.