Chimney Inspection in Murfreesboro - Flat-Price Sweep, Findings in Writing

Fast, Reliable Chimney Inspection Across Murfreesboro

A chimney inspection in Murfreesboro, TN typically costs between $120 and $350 depending on the level of inspection your home needs, and most inspections take 45 to 90 minutes on site. We serve every corner of Murfreesboro, from the historic streets near the downtown square to the newer subdivisions off Medical Center Parkway and Veterans Parkway. Our techs know exactly what to look for in Rutherford County homes, and we show you the camera photos before we recommend anything. Call (830) 251-4560 to book an inspection, and you’ll get a written price before any work starts.

Call (830) 251-4560

Why Flint Chimney Sweep Is Murfreesboro’s Preferred Chimney Inspection Company

Murfreesboro homeowners call us because we put the price in writing before a single tool comes off the truck. That’s not a sales pitch. That’s how every our Chimney Sweep in Murfreesboro job runs, and it’s part of The Garrison Standard that every Garrison Partners location follows since 2002. No tech will surprise you with a larger number after the inspection. The invoice matches the approved quote, every time.

Our technicians arrive in uniform, background-checked, and inside the window we give you when you book. When we finish an inspection, you get a written report with photos from the camera run. If we find something that needs repair, you get a flat price for that repair in writing. If that repair is covered by our 365-Day Done Right Promise and it fails within one year, we return at no charge. No argument, no re-quote, no fine print.

Dispatch for our Chimney Inspection team is coordinated from our Memphis office, and our crews run routes through Murfreesboro weekly. When you call the office, a live person answers. It’s not a voicemail tree and it’s not a callback form. It’s a person on the phone, 24 hours a day. That matters when you smell smoke in the house on a January night off Thompson Lane and you need a straight answer.

Chimney Flue Inspection in Murfreesboro

A Chimney Flue Inspection in Murfreesboro is a camera run up the flue to check the liner, mortar joints, and any blockages between the firebox and the chimney cap. Older homes near East Main Street and the historic district often have original clay tile liners that crack after decades of Rutherford County freeze-thaw cycles. Newer subdivisions off Veterans Parkway were frequently built with factory chimneys and DuraFlex or Copperfield liners that fail silently at the joints. In both cases, the only way to actually see the problem is a camera. A quick look at the firebox will not tell you what’s happening 15 feet up.

A standard flue inspection in Murfreesboro costs $175 to $325, and it typically takes about an hour on site. You’ll leave with a photo report showing exactly what the camera saw, which means any repair recommendation is backed by evidence you can see for yourself.

What the camera looks for

The camera is checking for cracked tiles, separated liner joints, creosote accumulation, and any obstruction like a bird nest or fallen brick. We also check the flue size against the fireplace opening. If you recently switched from wood to gas logs, that flue sizing check matters.

When a homeowner should schedule one

Schedule a flue inspection if you have not had one in two years, if you’re buying or selling a home in Murfreesboro, or if you have noticed a change in how the fireplace drafts. Back-puffing smoke, a sulfur smell, or visible water stains on the ceiling near the chimney all point to flue trouble.

Chimney Fire in Murfreesboro

The phrase Chimney Fire in Murfreesboro usually means one of two things: a homeowner wants an inspection because they suspect they’ve had one, or a homeowner wants to understand the risk before one ever happens. Both are legitimate reasons to call, and we take both seriously. A chimney fire happens when creosote in the flue reaches ignition temperature. First-degree creosote is a flaky black coating that brushes out easily. Left alone through several burning seasons, it glazes into third-degree tar. A brush cannot remove third-degree creosote, and that tar burns hot enough to crack the flue liner and spread to the framing around the chimney.

If you suspect a chimney fire in your Murfreesboro home, we’ll do a Level 2 inspection with a camera. Cost for a post-fire inspection runs $250 to $350. The camera will show whether the liner cracked, whether the mortar joints shifted, and whether the chimney is safe to use. That answer is worth every dollar, and you’ll see the evidence in the photo report.

What a real chimney fire sounds like

A chimney fire typically sounds like a freight train or a jet engine rumbling from inside the chimney. Some also report a loud crackling. After it dies down, the flue may look fine from the outside. It often is not fine. Interior liner damage is common.

What happens if you skip the inspection after a fire

You risk burning your next fire with a cracked liner, which allows heat and embers to reach framing and insulation that were never meant to be near open flame. This is not a small risk. If you suspect a chimney fire, call us before you burn again.

Trusted Brands We Service in Murfreesboro

We install and work with professional-grade chimney products including DuraFlex, Copperfield, Olympia Chimney, and Famco. These are brands that chimney trade professionals recognize by name, and we specify them by what the job actually needs, not by margin. If your Murfreesboro home has a factory-built fireplace with one of these liner brands, we can inspect it and service it correctly. If the inspection shows your liner needs work, we quote the right product for that chimney and that fuel type. No generic one-size-fits-all recommendations.

Common Chimney Inspection Problems We See in Murfreesboro Homes

• Cracked chimney crowns on older brick chimneys. The homes near the downtown square and around Middle Tennessee Boulevard were mostly built before 1940. Decades of Rutherford County freeze-thaw cycles crack the concrete crown at the top of the chimney, and water runs down the flue. That moisture shows up later as spalling brick on the exterior and a rusted damper inside.
• First-degree creosote turning into third-degree tar. In older Murfreesboro neighborhoods, homeowners often assume a brick chimney is maintenance-free and skip annual inspections. First-degree creosote sits through summer humidity, then hardens into a glaze that a standard brush cannot remove. The older the flue, the sooner we recommend a camera run.
• Silent liner joint failures in 2000s-era factory-built fireplaces. Subdivisions built around 2005 off Veterans Parkway and Medical Center Parkway typically have factory chimneys with DuraFlex or Copperfield liners. A Level 1 visual inspection of the firebox will not catch a failing joint halfway up the flue. Without a camera, the homeowner has no way to know until smoke or carbon monoxide becomes a problem.
• Blocked flues from nesting animals. Squirrels and birds nest in uncapped or unguarded chimneys across Murfreesboro. A blocked flue pushes smoke and carbon monoxide back into the house. An inspection is the fastest way to confirm a cap or damper is missing or damaged.

Pricing for Chimney Inspection in Murfreesboro, TN

We Also Serve Cities Near Murfreesboro

Beyond Murfreesboro itself, our crews run inspection routes into Christiana, Smyrna, La Vergne, and Nolensville. If you’re in one of those towns and you need a chimney inspection, call the same number and we’ll get you scheduled on the next route through your area.

FAQs About Chimney Inspection in Murfreesboro