Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Inspection Across SeaTac
A chimney inspection in SeaTac typically runs $175 – $350 for a standard Level 1 check, and $250 – $550 for a Level 2 camera inspection. Most SeaTac homes we see need a Level 1 once a year if you burn regularly, and a Level 2 after weather events or before a property changes hands. Flint Chimney Sweep serves every SeaTac neighborhood, from Angle Lake to McMicken Heights, with a written price agreed before we ever park the truck. Call (830) 251-4560 to book your inspection and get the exact number up front.
Why Flint Chimney Sweep Is SeaTac’s Preferred Chimney Inspection Company
We understand what SeaTac’s housing stock actually looks like: postwar rental duplexes off International Boulevard, 1960s split-levels near Bow Lake, and newer infill townhomes squeezed in near the airport flight path. That mix means no two chimneys we inspect are the same, and we don’t treat them as if they were.
Our Chimney Inspection team works under The Garrison Standard, the same code every Garrison Partners location follows. That means one thing in practice: a written price delivered before any work starts, a camera report you can see for yourself, and a repair guarantee valid for a full year. Hank Delano runs our crews the way a disciplined tradesperson should run a crew, and it shows in how we handle the small stuff, like arriving inside the window we gave and leaving the hearth cleaner than we found it.
SeaTac homeowners call us because they’ve been burned by chimney companies that quote low on the phone and show up with a different number. We don’t operate that way. The price we give you at booking is the price on the invoice, period.
Chimney Fire in SeaTac
Chimney Fire in SeaTac is what our camera inspection is built to catch before it becomes an actual fire. When we inspect a SeaTac chimney, we’re looking for the creosote accumulation, cracked flue tiles, and blockages that turn a routine burn into a dangerous one. A Level 1 inspection in SeaTac, which covers the accessible portions of the fireplace, flue, and exterior chimney, runs $175 – $250. If anything looks off during that visual check, the camera comes out.
What We’re Actually Looking For
In SeaTac’s older rentals, we regularly find bird nests packed into the flue, dislodged liner sections, and dampers jammed open from years of grit. These are quiet problems. They don’t announce themselves the way a chimney fire does, which is exactly why an annual check matters here even if you barely burn.
What It Costs to Catch the Problem Early
A camera inspection, which pushes a real-time video feed down the entire flue, adds $100 – $200 to the base inspection price in SeaTac. That’s the check that catches a cracked clay tile or a twisted liner section before it becomes a six-thousand-dollar reline job. The camera report comes with the inspection; you keep it.
Level 2 Chimney Inspection in SeaTac
A Level 2 Chimney Inspection in SeaTac is what we recommend after a storm with heavy rain, before a real estate transaction closes, or any time the house has changed hands and nobody can produce a prior inspection record. It covers everything a Level 1 covers, plus the accessible attic, crawlspace, and basement portions of the chimney, and it always includes a camera scan of the flue interior. In SeaTac, a Level 2 inspection runs $250 – $550 depending on the chimney’s height and access.
When a Level 2 Makes Sense Here
SeaTac’s position directly under the Sea-Tac Airport flight path means heavy rain events hit hard and fast. Flashing that separated during a winter windstorm won’t make a sound you can hear over a landing 737. A Level 2 after a storm season is how you find the leak before the ceiling stain shows up.
The Camera Is the Whole Point
We don’t ask you to take our word on anything. A Level 2 includes a full camera scan with photographs, and we walk you through every image. If the report shows first-degree creosote only and no structural damage, we tell you the next sweep can safely wait a full year. If it shows a real problem, you see it with your own eyes before any repair is discussed.
Trusted Brands We Service in SeaTac
When a SeaTac inspection turns up a repair need, we specify professional-grade materials by job, not by margin. That means DuraFlex liner sections when a reline is warranted, HeatShield when a flue can be resurfaced instead of replaced, and Copperfield or Famco components when dampers, caps, or chase covers need attention. Our crews keep common parts stocked for fast turnaround on SeaTac jobs, and we stand behind every repair we install with a written one-year guarantee.
Common Chimney Inspection Problems We See in SeaTac Homes
- Bird and rodent nests in the flue. SeaTac’s mature trees, especially around Angle Lake and North SeaTac Park, mean nesting birds find chimneys without caps fast. A nest packed into a flue is a carbon monoxide and chimney fire risk, and it’s one of the most common things our camera finds.
- Spalling crowns and cracked caps. SeaTac’s wet winters and summer temperature swings work on the masonry crown at the top of the chimney. Once water gets into the crown, it freezes and thaws its way into the brickwork below, and by the time you see it inside, it’s a repair, not a sweep.
- Detached or corroded flashing. The constant vibration from low-flying aircraft doesn’t help roof flashing around chimneys. We see flashing that’s pulled away from the roofline on homes all over SeaTac, letting rain run straight down the chimney chase between tenants.
- Jammed or rusted dampers. In SeaTac’s older rentals, dampers sit open for years because nobody thinks to close them. Grit and moisture rust the mechanism, and then drafts, heat loss, and rain intrusion become the tenant’s problem, which means they become the property manager’s problem.
Pricing for Chimney Inspection in SeaTac, WA
A standard Level 1 chimney inspection in SeaTac runs $175 – $250. A Level 2 with camera scan runs $250 – $550, with the price depending on flue height, roof pitch, and how many appliance flues we’re checking. A camera-only scan on an existing inspection runs $100 – $200. What affects the price is access: a single-story rambler near McMicken Heights is a faster job than a two-story split-level with a steep pitch near Bow Lake. You’ll get the exact number in writing before we start, and that number doesn’t change when we show up. Call (830) 251-4560 for a free estimate and a fixed quote at booking.
We Also Serve Cities Near SeaTac
Our Chimney Inspection in SeaTac coverage extends to nearby cities including Seattle, Tacoma, Vancouver, and Spokane. If you own or manage property in any of these areas, the same written pricing, camera reporting, and one-year repair guarantee apply. Dispatch and scheduling are coordinated from our Seattle office; crews serve SeaTac locally.
Serving SeaTac, WA - Our Local Coverage Area
We’re based in the SeaTac area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in SeaTac
Once a year, even if you rarely burn. SeaTac’s wet climate and tree cover mean moisture intrusion, bird nests, and crown damage happen whether you burn or not. An annual NFPA 211 Level 1 check costs $175 – $250 and catches problems while they’re still cheap. If you burn less than a cord a season and the annual report comes back clean for two straight years, you can safely stretch it to every other year. Call (830) 251-4560 and we’ll book the next inspection at a fixed price.
A Level 2 adds a camera scan of the entire flue interior plus the accessible attic, crawlspace, and basement portions of the chimney. A Level 1 is visual only: what the technician can see from the firebox and the roof. In SeaTac, we recommend Level 2 for real estate transactions, after storm season, or when a property has changed hands with no inspection record. The camera report shows you exactly what we saw, and it’s yours to keep.
Yes. You get a fixed price when you book, not a ballpark. A Level 1 inspection in SeaTac runs $175 – $250; a Level 2 with camera runs $250 – $550. We don’t quote low on the phone and find reasons to add cost on site. The number you approve at booking is the number on the invoice, and that’s the Garrison Standard, no exceptions. Call (830) 251-4560 for an exact quote.
We schedule inspections at the soonest available appointment in your area, but we don’t promise same-day dispatch. Chimney inspection work is booked ahead, especially in the fall before burning season, and the urgency here is seasonal rather than hourly. The right time to book a SeaTac inspection is before you light the first fire, not the day the smell hits. That said, a live person answers our phone around the clock, so call (830) 251-4560 and we’ll get you on the schedule.
You’ll get a written report with camera photographs of your flue interior, plus a plain-language summary of what we found and what can safely wait. If we find a repair, you’ll see the photo before we discuss the fix, and any repair we make carries a written guarantee valid for one full year. No repair is ever recommended without camera evidence you can see yourself. Call (830) 251-4560 to book your inspection and get the full report in hand.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving SeaTac with fixed-price chimney inspections and camera-reported findings under the Garrison Standard.