Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Inspection Across Wauna
A chimney inspection in Wauna typically runs $169 – $289 for a Level 1, and $289 – $489 for a Level 2 with camera work. We serve the entire Wauna area including Cromwell, Wauna Shores, and homes along 140th Avenue NW and Wright Bliss Road. Our techs know what marine air does to a chimney crown here. Call (830) 251-4560 and you’ll get a live person, a written price before any work starts, and an inspection report you can actually read.
Why Flint Chimney Sweep Is Wauna’s Preferred Chimney Inspection Company
We’re part of the Garrison Partners family, founded in 2002, and we operate under The Garrison Standard: a written price delivered before any tool comes off the truck. That’s not a sales line. It’s the way every Chimney Inspection job runs, from first call to final photo report.
Wauna homeowners tell us the same thing over and over: they’ve had inspectors show up late, glance at the firebox, hand over a one-page form, and disappear. We don’t work that way. Our technicians are background-checked and uniformed. They arrive inside the window we give you. They run the camera. They show you what they found, in writing, with photos.
Hank Delano leads the crew, and he’s direct about what matters: a Wauna chimney inspection should tell you whether your flue is safe to burn, whether water is getting in, and whether anything needs attention now versus next year. That’s the job. We do it without softening the findings and without inventing work you don’t need.
Chimney Leak in Wauna
A chimney leak in Wauna is usually not a leak inside the flue at all. It’s water coming through the crown, flashing, or masonry. Our inspection finds the entry point and we give you a written repair scope with a fixed price. Most crown repairs in Wauna run $350 – $850. Flashing reseal work typically lands between $400 and $900. The exact number depends on what the camera shows, not a guess.
Where Water Gets In
Marine air from the Sound and heavy winter rain mean the crown and flashing take a constant beating in Wauna. We see cracked crowns, spalling mortar, and rusted flashing on homes of every age. A Level 2 inspection with a camera is the fastest way to pinpoint the entry point before the damage spreads to the smoke chamber or firebox.
The Written Report You Keep
Every inspection ends with a photo report. You see the crack. You see the water staining. If repair can wait, we say so. If it can’t, we give you a written quote that matches the invoice. No price movement at the door.
Chimney Camera Inspection in Wauna
A chimney camera inspection in Wauna is the difference between knowing your flue is safe and assuming it is. We run a high-resolution camera through the full flue, from firebox to cap, and we record what we find. A Level 2 camera inspection in Wauna runs $289 – $489. Homes with older, unlined flues or a history of water intrusion should get one before the burning season.
What the Camera Catches
The camera sees what a flashlight can’t: third-degree creosote baked onto the smoke chamber walls, deteriorated mortar joints between flue tiles, hairline cracks behind the damper, and animal nests in the offset. In Wauna, we regularly find glazed creosote in chimneys that only get used a handful of times a year. The camera shows it in real time.
Photo Proof, Not Just a Verbal Summary
We were called to a home on Carson Street in Wauna after the homeowner noticed a musty smell near the fireplace on damp days. Our tech ran a Level 2 inspection with a camera and found a hairline crack in the chimney crown and failed flashing, letting water drip onto the smoke chamber and mix with first-degree creosote. We replaced the crown, resealed the flashing, and swept the flue liner, and the smell was gone on the next rainy day. That’s the kind of finding a visual check misses.
Trusted Brands We Service in Wauna
We work with HeatShield for flue joint repair and resurfacing, Gelco and Olympia Chimney for caps and chase covers, and Famco for vents. When a Wauna inspection turns up a cracked flue tile or a rusted cap, we quote the specific product and get it ordered without a second visit to diagnose. We don’t substitute generic parts to hit a margin. We spec the repair to the job and put the brand name on the quote so you can verify exactly what’s going in.
Key Takeaways:
- A Level 1 inspection in Wauna runs $169 – $289; a Level 2 with camera runs $289 – $489.
- Wauna’s marine air and winter rain make crown and flashing failures as urgent as creosote buildup.
- Every inspection ends with a written photo report, not a handshake summary.
- Every repair carries the 365-Day Done Right Promise: a written guarantee valid for one full year.
- Call (830) 251-4560. A live person answers 24/7.
Common Chimney Inspection Problems We See in Wauna Homes
- Cracked chimney crowns. Wauna’s freeze-thaw cycle and constant damp air open up hairline cracks in concrete crowns. Water seeps in, freezes, and widens the crack every winter. By the time you see staining on the ceiling, the damage is already inside the masonry.
- Failed flashing. Flashing around the chimney base takes direct rain off the Sound. We reseal or replace it on a large share of Wauna homes that have never had it touched since construction. A camera inspection shows exactly where the seal broke.
- Third-degree creosote in the smoke chamber. Even homeowners who burn only a few fires a season can have glazed, shiny creosote baked onto the smoke chamber walls. It’s a fuel source. A camera inspection catches it before it becomes a chimney fire.
- Deteriorated mortar joints in older, unlined flues. Many Wauna chimneys built before modern liner standards have mortar breaking down between flue tiles. Smoke and heat reach the surrounding masonry where they shouldn’t. Only a camera inspection shows the full extent.
Pricing for Chimney Inspection in Wauna, WA
Here’s what you’ll pay for a chimney inspection in Wauna. A Level 1 visual inspection runs $169 – $289. A Level 2 inspection with camera runs $289 – $489. A Level 3 inspection, which involves opening access to concealed flue areas, starts at $600 and is quoted after we see what’s involved. Crown repair runs $350 – $850. Flashing reseal runs $400 – $900. Flue liner replacement, when needed, starts around $2,800 depending on the liner brand and flue length. Every quote is written before work begins. Every repair carries a written one-year guarantee. Call (830) 251-4560 for a free estimate on any inspection in Wauna.
We Also Serve Cities Near Wauna
Chimney inspection service extends to the whole Kitsap and south Sound peninsula. We regularly work in Gig Harbor, Vashon, Port Orchard, and University Place. If you’re searching for Chimney Inspection in Wauna or the surrounding area, give us a call and we’ll confirm coverage for your street.
Serving Wauna, WA - Our Local Coverage Area
We’re based in the Wauna area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Wauna
Once a year, even if you only burn a few times a season. Wauna’s wet climate causes crown cracks and spalling that go unnoticed until a leak appears, and creosote buildup doesn’t reset just because the fireplace sat idle. Call (830) 251-4560 to schedule, and we’ll give you a written price before the visit.
It shows the full flue interior, including the smoke chamber and offset areas a flashlight can’t reach. In Wauna, where moisture mixes with creosote, a camera often catches third-degree creosote or cracked tiles that a visual check misses. You get photos of everything we find.
Generally no. Wauna’s rainy season runs from October through May, and every wet month pushes more water through the crack. What starts as a musty smell can turn into smoke chamber damage and masonry repair that costs thousands. If the leak is small and the camera shows no fire risk, we’ll say you can wait. Otherwise, fix it now. Call (830) 251-4560 for an honest assessment.
A shiny, tar-like coating on the flue walls, a strong campfire smell even when the fireplace is cold, or black flakes dropping into the firebox. Third-degree creosote is highly combustible and can’t be brushed off by a standard sweep. It typically requires chemical treatment or removal with a rotary chain.
Yes. We install and repair DuraFlex liners and use HeatShield for flue joint repair and resurfacing. We also work with Gelco, Olympia Chimney, and Famco products. The brand is specified on your written quote, so you know exactly what’s going in before any work starts.
If you need a chimney inspection in Wauna, call (830) 251-4560. You’ll reach a live person, get a written price before any work begins, and receive a photo report you can keep. Estimates are free.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Wauna and the surrounding Kitsap area as part of the Garrison Partners family since 2002.