Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Antioch
Chimney repair in Antioch typically runs $175 – $2,800 depending on what’s actually wrong, and most jobs are quoted in writing before any work starts. We serve every Antioch neighborhood, from the Delta-front streets near the marina to the tract builds off Hillcrest Avenue and Lone Tree Way. The diagnosis comes first: a camera inspection that shows you exactly what’s damaged, then a flat written price. Call (830) 251-4560 and you’ll reach a live person who can schedule the inspection.
The Chimney Repair team at Flint Chimney Sweep has worked on hundreds of Antioch chimneys, and the one thing we see consistently is that the same complaint, water in the firebox or a flue that won’t draft, traces back to two very different root causes depending on which side of town you live on. Antioch’s older Delta-front and downtown homes sit on original masonry chimneys that absorb decades of fog and winter rain. The 1980s and 1990s tract homes off Hillcrest and Lone Tree use factory-built metal flue systems. A proper repair starts with identifying which system you have, then inspecting it with a camera before any quote is written.
Why Flint Chimney Sweep Is Antioch’s Preferred Chimney Repair Company
We’re part of the Garrison Partners family, founded in 2002, and every repair we perform in Antioch carries the 365-Day Done Right Promise: a written guarantee valid for one full year from the service date. If a covered repair fails in that window, we return at no charge. No argument, no invoice. That standard applies to every mortar repointing job downtown, every crown rebuild near the marina, and every flue liner replacement in the east tract neighborhoods.
Antioch homeowners deal with real weather. Delta fog settles in overnight, winter rain comes off the river hard, and the summer sun bakes exposed brick and mortar. That cycle is exactly what cracks crowns, pulls flashing loose, and spalls brick faces. Our technicians live with the same conditions and know where Antioch chimneys fail first. We also carry the material brands that hold up here: Chimney Repair in Antioch work in our experience calls for Gelco sealants on crown rebuilds, HeatShield for flue resurfacing on older masonry flues, and Olympia Chimney components on cap and termination replacements. We name the parts on the quote, so you can verify quality independently before approving anything.
Written Price Before Work Starts
Every Flint Chimney Sweep job in Antioch, from a single tuckpoint patch to a full chimney rebuild, gets a written price before a single tool comes off the truck. The number you approve is the number on the invoice. This is non-negotiable and applies to every service call. No Antioch customer has ever been surprised at the door.
Background-Checked, Uniformed Technicians
You’ll know exactly who’s walking through the door in Antioch. Our technicians are background-checked, uniformed, and dispatched from our Bay Area scheduling office. We call with a window, we arrive inside it, and the first thing we do is put down drop cloths and explain what we’re checking. The chimney repair field has too many no-shows and drive-by quotes. We run on a different code: the Garrison Standard.
Chimney Crown Repair in Antioch
Chimney Crown Repair in Antioch usually costs $400 – $1,200, and it’s one of the most common repairs we quote on the Delta side of town where original masonry chimneys sit fully exposed to the elements. The crown is the concrete cap at the very top of the chimney stack. When it cracks, water gets into the chase and runs down through the smoke chamber, rusting the damper and eating mortar joints from the inside. On a Delta-front home near the Antioch Marina, our tech found exactly that: a cracked crown and flashing pulling away from the stack after a wet winter, with water tracking down the smoke chamber and rusting the damper. We ran a Level 2 inspection, shot photos of the crown, flashing and flue liner, and quoted a crown rebuild with new cap and flashing reseal, all confirmed in writing before we scheduled the work.
What the Crown Rebuild Includes
We remove the old cracked concrete, pour a new crown with a proper pour and drip edge so water sheds away from the flue, and seal it with Gelco or an equivalent professional-grade masonry sealer. The repair also includes a new chimney cap if the existing one is rusted or missing. You get photos before, during, and after.
When Antioch Homeowners Need It
If you see hairline cracks in the concrete at the top of your chimney, or if your firebox smells damp after rain, have the crown checked. A crown repair done early costs a fraction of a rebuild done after water has worked through the structure for two or three winters. On older Antioch mnic masonry homes, this is the single most cost-effective repair you can make.
Chimney Repair Companies in Antioch
Chimney Repair Companies in Antioch split into two camps: general handymen who will patch what they can reach from a ladder, and chimney-specific companies that run camera inspections before touching anything. We’re the second kind. Our Antioch customers get a Level 1 or Level 2 camera inspection as the first step on every repair call, because the real damage is rarely visible from the firebox. The photo report is yours on the spot, and your quote references what the camera showed. You never have to take our word for it.
What We Check Before Quoting
We inspect the flue liner joints with a camera, verify the flashing at the roofline, check the crown for cracks and spalling, and test the damper operation. Then we write the quote. If the chimney doesn’t need work, we’ll tell you that plainly and document it. About a third of the inspection calls we run in Antioch end with us saying the chimney can wait another season, and we send you home with the photos and a written note of what to watch.
Repair vs Rebuild
Some companies quote a full chimney rebuild on any stack with a cracked brick or two. That’s wrong. Where spalling is shallow and the flue liner is intact, tuckpointing and a crown reseal solves it for $400 – $900. Where the liner is damaged behind the brick, a rebuild or a flue relining may be justified. The difference is visible on camera, and we show it to you before you spend a dollar.
Trusted Brands We Service in Antioch
Flint Chimney Sweep specs professional-grade material brands by job, not by margin. On Antioch masonry repairs, we use Gelco sealants and water repellents where the Delta exposure demands them. For flue relining and resurfacing, we install HeatShield and DuraFlex systems and our techs are factory-trained on both. When a metal flue termination on a Hillcrest or Lone Tree tract home needs replacement, we stock Olympia Chimney caps and flashings locally so the truck doesn’t have to wait on a parts run. Every brand is named on your written quote, and you’re welcome to verify each one independently.
Common Chimney Repair Problems We See in Antioch Homes
- Cracked crowns on Delta-front and marina-area masonry chimneys. The winter rain and overnight fog off the river work on exposed concrete year after year. Once water gets past the crown, it quietly rots the firebox and damper before the homeowner notices anything inside.
- Spalling brick and failing mortar on older downtown Antioch homes. The original masonry on these chimneys drops mortar and sheds brick faces, but the deeper problem is often a damaged flue liner behind the brick. We’ve seen rebuilds quoted without a Level 2 inspection that would have caught the liner damage first.
- First-degree creosote glazing at flue liner joints in east-side tract builds. The 1980s and 1990s factory-built metal flue systems off Hillcrest and Lone Tree often get a generic sweep that misses the glazed creosote at the joints. That glazing is the part that actually needs attention before it hardens into third-degree creosote, which is a chimney fire risk.
- Failed flashing at the roofline. On Antioch homes with composition shingle roofs, the flashing where the chimney meets the roof takes constant expansion and contraction. Once the seal breaks, water follows the stack down into the attic and ceiling. Flashing repair runs $300 – $700 when caught early.
Pricing for Chimney Repair in Antioch, CA
Here are the ranges we quote in Antioch, with the understanding that every job gets a written price before any work starts. A mortar repointing patch runs $300 – $600. A chimney crown rebuild runs $400 – $1,200. Flashing repair at the roofline runs $300 – $700. Spalling brick repair and tuckpointing run $500 – $1,500 depending on the area. A full chimney rebuild from the roofline up runs $2,500 – $8,000. A flue relining with HeatShield or a DuraFlex liner section runs $1,800 – $4,500. Waterproofing the masonry exterior runs $250 – $600. The camera inspection that starts every repair call is included in the repair quote, and the written price covers the full scope. Call (830) 251-4560 and we’ll get you on the schedule.
We Also Serve Cities Near Antioch
Our Antioch crews work the full corridor: Oakley to the west, Pittsburg and Clayton to the southwest, and Brentwood to the south. If you’re in one of those cities, the same written-price process and 365-day guarantee apply. Call (830) 251-4560 and we’ll confirm which crew serves your street.
Serving Antioch, CA - Our Local Coverage Area
We’re based in the Antioch area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Antioch
Every 12 months, no matter which side of town you live on. The Delta fog and winter rain off the river accelerate crown cracking and flashing failure on masonry chimneys near the marina and downtown. On the east side, the metal flue systems in Hillcrest and Lone Tree tracts glaze with creosote at the joints faster than homeowners expect, especially if you burn softwood or unseasoned wood. A yearly inspection with a camera catches both problems early, and the photo report shows you exactly what’s there. Call (830) 251-4560 to schedule yours.
Ours includes a camera inspection, a written scope of work, the specific material brands we’ll use, and a flat price that will not change at the door. If you’re in a brick 1950s ranch downtown, the quote reflects a masonry system. If you’re in a 1990s stucco tract house off Lone Tree, it reflects a factory-built metal flue. You get the photos and the inspection report whether or not you approve the repair. Estimates are free, and the number you approve is the number on the invoice.
No, and anyone who says they can from looking up the flue with a flashlight is guessing. First-degree creosote is a light dusty film that brushes out. Third-degree is a hardened, glazed tar that will not brush off and is a serious chimney fire risk. The difference is only clear on camera, and on Antioch’s east-side metal flue systems, the glazing hides at the liner joints, which a top-down glance never sees. We show you the camera footage before we recommend anything.
The three most common leak sources in Antioch are a cracked crown, failed flashing at the roofline, or a missing or damaged chimney cap. We narrow it down with a Level 2 camera inspection and water tracing around the crown and roofline. On a Delta-front home near the Antioch Marina, the answer is almost always the crown; on tract homes off Hillcrest, flashing at the roofline fails just as often. We’ll point to the exact source in the photos and quote only what’s needed, which usually runs $400 – $1,200.
Most repairs can wait until spring if you stop using the fireplace now and the damage is limited to the crown or flashing. What shouldn’t wait is third-degree creosote: that’s a chimney fire risk, and it will not improve on its own. Water intrusion is a slower burn, but every wet winter in Antioch works the damage deeper and raises the eventual repair cost. If we inspect your chimney and tell you it can wait, you’ll have that in writing with the photos to back it. Call (830) 251-4560 for an honest read on your chimney.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Antioch since 2002.
Call (830) 251-4560 for a free chimney repair estimate in Antioch. A live person answers, day or night.





Before
After
Before
After
Before
After