Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Atlanta
Chimney repair in Atlanta, GA typically runs $180 to $340 for a standard brick or mortar fix, while a full flue relining job usually lands between $2,400 and $5,200 depending on the liner material and chimney height. That’s the honest range. What you get from Flint Chimney Sweep is a written price before any work starts, a camera inspection with photo report so you see exactly what we see, and a 365-Day Done Right Promise on every repair. We dispatch crews from our Atlanta office to homes across the metro, from Grant Park to Buckhead. Call (830) 251-4560 to schedule.
Why Flint Chimney Sweep Is Atlanta’s Preferred Chimney Repair Company
Atlanta homeowners have dealt with chimney companies that no-show, pad the bill at the door, or leave brick dust across the living room floor. That’s not how we operate. Every Flint technician arrives in uniform, background-checked, and inside the window we gave you when you booked. The price you approve before the job is the price on the invoice. No add-ons, no “while we’re here” surprises.
We’re part of the Garrison Partners family, founded in 2002, and every location operates under The Garrison Standard: a written scope, a written price, and a written guarantee. Hank Delano leads our Atlanta team, and the same discipline applies whether we’re repointing a firebox in Midtown or rebuilding a crown on a 1950s brick ranch in Decatur. Our Chimney Repair crew has worked on Atlanta’s older housing stock long enough to know what red-clay soil movement does to a chimney. That local knowledge is why our guarantee actually means something here.
Chimney Liner Installation in Atlanta
Chimney Liner Installation in Atlanta means replacing the inner liner that channels smoke and combustion gases safely out of the house. It’s not a cosmetic job. A cracked or missing liner lets heat, carbon monoxide, and creosote work into the chimney chase and the framing around it. In Atlanta, we install stainless steel liners from DuraFlex and Copperfield, specified by the flue dimensions and the appliance venting through it, not by what’s on the truck. A standard liner install in the Atlanta market runs $2,400 to $5,200, including the liner, top plate, and connector work.
What the camera shows us
Before we quote a liner, we run a camera through the flue and take photos. You get those photos. If the old clay liner has a hairline crack that isn’t leaking gases, we’ll tell you it can wait. If sections are spalling or missing entirely, the photos will show that too, and you’ll understand why the repair is necessary. This is the difference between a straight answer and a sales pitch.
When Atlanta homeowners need one
Homes built before the 1960s often have original clay tile liners. Fifty or sixty years of Atlanta’s freeze-thaw cycles, plus moisture from crown or flashing failures, cracks them. We see it regularly in older neighborhoods like Grant Park and Kirkwood. A furnace or water heater that was switched from natural draft to higher-efficiency venting changes flue temperatures and accelerates liner breakdown. The camera tells us what’s actually happening.
Chimney Flashing Repair in Atlanta
Chimney Flashing Repair in Atlanta addresses the metal seal where the chimney meets the roofline. When flashing fails, water runs down the outside of the chimney, behind the siding, and into the ceiling. In Atlanta, flashing takes a beating because the red-clay soil here expands and contracts with moisture more than almost any metro in the Southeast. That movement shifts the chimney slightly season after season. Flashing that was tight five years ago separates from the brick, and every rainstorm drives water into the gap. A flashing repair in Atlanta typically runs $180 to $500, depending on whether we’re re-sealing existing flashing or replacing it with new copper or aluminum.
The crown-flashing connection
Most leaking chimneys in Atlanta don’t have one point of failure. They have two. The crown cracks, water enters the top, and the flashing at the roofline fails around the same time because the chimney is moving. We were called out to a 1920s bungalow in Grant Park where the homeowner had water stains on the ceiling right beside the chimney. Camera inspection found a cracked crown and failed flashing where the chimney met the roof line. Water had been running down the outside of the flue liner for who knows how long. We rebuilt the crown, replaced the flashing with new copper, and installed a stainless liner with a HeatShield top plate seal. The ceiling stain stopped spreading and the next rainstorm proved it.
Signs you’re already leaking
Water stains on the ceiling near the chimney, damp insulation in the attic, or a musty smell after heavy rain are all flashing failure symptoms. By the time you see the stain, the leak has usually been active for months. Call us before the drywall goes soft and the framing starts to rot. The repair is cheaper than the remediation.
Trusted Brands We Service in Atlanta
We stock parts for Atlanta jobs from Copperfield, DuraFlex, and HeatShield, so a liner or top plate doesn’t have to be ordered and re-scheduled. These are professional-grade chimney trade brands, specified by the job, not by our margin. A Copperfield stainless liner goes in where a stainless liner is the right call. HeatShield’s cerfractory sealant is what we use when a clay liner has minor cracking and doesn’t need a full stainless replacement yet. DuraFlex is our go-to for flexible relining in tight or offset flues, common in Atlanta’s older two-story homes. If you want to verify the material quality before you approve the quote, you can look up any of these brands yourself.
Common Chimney Repair Problems We See in Atlanta Homes
- Crown and flashing failures from clay soil movement. Atlanta’s red clay expands and contracts more dramatically than most metros, which means chimney crowns crack and flashing separates over time. A repair that only addresses the flue liner without fixing the crown and flashing is a repair that comes back.
- Third-degree creosote glaze mistaken for first-degree buildup. Atlanta’s mild winters mean people burn less frequently, but often with green or unseasoned wood. That produces a hard, tar-like glaze a brush can’t remove. It’s a chimney fire waiting to happen, and it requires chemical treatment or mechanical removal, not a standard sweep.
- Spalling brick on the exterior chimney chase. Homeowners see a few flakes of brick missing and assume it’s cosmetic. After Atlanta’s repeated freeze-thaw cycles, the mortar joints behind those spalled bricks have often gone soft. The face brick is what you see; the failing mortar is what’s holding the chimney together.
- Water intrusion through the top of the flue. A missing or rusted rain cap on an Atlanta chimney lets rain directly into the flue. That mixes with creosote and accelerates liner damage. A cage cap with a proper top plate is a twenty-minute fix that prevents a $3,000 liner replacement.
Pricing for Chimney Repair in Atlanta, GA
Here’s what we charge in the Atlanta market. Mortar repointing runs $180 to $340, depending on the square footage of wall surface. Tuckpointing is in the same range, $200 to $380. Flashing repair runs $180 to $500. A full chimney rebuild starts around $1,800 and can go to $5,000 or more if the firebox and smoke shelf need work. Chimney waterproofing runs $350 to $900. Flue relining with a stainless liner runs $2,400 to $5,200. Camera inspection is included with every sweep and every repair quote. We don’t charge for the estimate, and the price we hand you in writing is the price you pay. Call (830) 251-4560 for an exact quote on your chimney.
We Also Serve Cities Near Atlanta
Our crews work throughout the Atlanta metro, including Atlanta neighborhoods like Buckhead, Grant Park, Kirkwood, and Morningside, and the surrounding communities of Smyrna, Mableton, Marietta, and Austell. If you’re anywhere in the metro and wondering whether we cover your street, call and ask. We’ll give you a straight answer.
Serving Atlanta, GA - Our Local Coverage Area
We’re based in the Atlanta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Atlanta
Once a year, before burning season. Even if you only burn a few fires each winter, Atlanta’s humidity and freeze-thaw cycles work on the crown, flashing, and mortar all year round. An annual inspection catches those problems while they’re still cheap to fix. If you haven’t burned in two or three years, that’s not a reason to skip it, it’s a reason to have the camera run. Call (830) 251-4560 to schedule yours.
First-degree creosote is a light, dusty soot that a standard brush removes in one pass. Third-degree creosote is a hard, shiny, tar-like glaze that forms when you burn green or unseasoned wood at low temperatures, which we see a lot in Atlanta because the winters are mild enough that fires are more occasional than constant. A brush won’t touch third-degree glaze. It has to be chemically treated or mechanically removed, and until it is, it’s a chimney fire risk. The camera inspection tells us which one you have.
If the crack is hairline and the camera shows no water intrusion behind it, it can wait a season, and we’ll tell you that. If the crack is wide enough to let water reach the flue liner or the interior brick, it should be sealed now. Water is the slow killer of Atlanta chimneys. Every freeze-thaw cycle turns a small crack into a spalled brick and a spalled brick into a rebuild. We’ll show you the photos and give you a straight answer on timing. Call (830) 251-4560 for an assessment.
The camera inspection is included in the price of a sweep, and it’s also included when we come out for a repair estimate. We don’t charge extra to put a camera up your flue. The photo report is yours to keep, whether or not you hire us for the repair. That’s the only way for you to know what’s actually happening inside the chimney, and we want you to have that information regardless of who does the work.
Sometimes, and we’ll know once we see the scope. A flashing repair, a crown seal, a basic repointing job – those are often done the same visit because we stock the materials on the truck. A full liner install or a chimney rebuild is usually scheduled for a separate day, because the work takes longer and the price and material list need to be approved first. We don’t promise same-day service across the board, because we don’t start work until you’ve approved a written price. Call (830) 251-4560 and we’ll tell you honestly what your repair needs and how soon we can do it.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Atlanta, GA since 2002.