Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Canyon Lake
Chimney repair in Canyon Lake typically runs $220 to $900 for common fixes like flashing repair and mortar repointing, while full chimney rebuilding or flue relining can range from $1,800 to $4,500 depending on the scope. Most Canyon Lake homeowners reach us after a bad stretch of damp weather exposes a leak or after an inspection flags damage they didn’t know was there. Our crew works the neighborhoods around Cranes Mill Road, Oblate Drive, and along FM 2673, so we know the lakefront conditions and the older Hill Country masonry that holds up differently than what builders use farther inland. Call (830) 251-4560 and we’ll schedule a time to look at what’s actually going on.
Why Flint Chimney Sweep Is Canyon Lake’s Preferred Chimney Repair Company
Flint Chimney Sweep has been part of the Garrison Partners family since 2002, which means every job in Canyon Lake runs under the same Canyon Lake operating code we call The Garrison Standard. What that means for you is simple: a written price before any tool comes off the truck, a camera inspection with a photo report you keep, and a 365-Day Done Right Promise on every repair we make. If a covered repair fails within one full year, we come back at no charge. No argument, no re-quote.
Canyon Lake homeowners tell us the same thing: they’ve had crews quote one price at the door and another after the flue cap comes off. That doesn’t happen with us. Hank Delano, our owner, set a rule from the start: the number on the written estimate is the number on the invoice. Technicians are background-checked and uniformed, and the phone is answered by a live person 24/7, not a voicemail tree. You’ll know exactly who’s walking through your door and exactly what the repair will cost before we start.
We also return calls from the Canyon Lake side of the lake same business day, and most repair visits are scheduled within the week. The humidity out here means water damage moves fast, so we don’t let these calls sit.
Chimney Liner Installation in Canyon Lake
Chimney Liner Installation in Canyon Lake replaces the inner channel that carries smoke and combustion gases safely out of the house, and it’s a job we handle frequently for homeowners in older lakefront and hillside homes where the original flue was built without a clay tile liner or where that liner has cracked from decades of heat and moisture. When the liner fails, heat and creosote can reach the masonry behind it, which is how chimney fires start and how carbon monoxide finds its way into living spaces. This is not a cosmetic repair.
When a Liner Is Required, Not Just Recommended
A cracked clay tile liner or an unlined flue is a fire risk and a carbon monoxide risk, plain as that. On Cranes Mill Road and around the north side of the lake, we regularly see unlined flues in homes built before Comal County code required them. If our camera shows spalling inside the flue, second-degree creosote flaking on the masonry, or animals that have nested in the opening, a liner is the correct fix, not a sweep.
What a Liner Job Costs Here
A stainless liner installation in Canyon Lake typically runs $1,800 to $3,200 for a single-story home, depending on flue length and whether an existing clay liner needs to be removed first. We use DuraFlex and Olympia Chimney stainless systems, which carry their own manufacturer warranties in addition to our written one-year guarantee on workmanship. The written quote you approve before the job starts includes the liner material, the insulation wrap if needed, and the cap replacement.
Chimney Flashing Repair in Canyon Lake
Chimney Flashing Repair in Canyon Lake addresses the metal seal where the chimney meets the roofline, and it’s the single most common repair we make for lakefront and hillside homes where wind blows rain sideways off the water. Flashings fail in two ways: the metal itself corrodes or the sealant between the flashing and the brick or stone breaks down. Once water gets under the flashing, it runs down the chimney chase and into the attic, often showing up as a stain on the ceiling far away from where the leak actually starts.
Blowing Rain and Rusted Flashing
Canyon Lake gets wind that carries moisture from the shoreline in directions most roofs weren’t designed to shed. We see step flashing and counter-flashing that looks intact from the ground but has pulled away from the chimney by a quarter inch, which is enough for water to track down the flue and onto the smoke chamber. A chimney cap replacement usually goes hand in hand with flashing work on the lake side because both fail from the same exposure.
What a Flashing Repair Costs Here
Flashing replacement or resealing in Canyon Lake typically runs $350 to $750 for a standard masonry chimney, with the higher end covering full counter-flashing replacement and a new storm collar. We use Gelco and Copperfield flashing products, chosen for how they hold up under repeated wet-dry cycles rather than just whatever is cheapest at the supply house. The written quote covers both the labor and the specific flashing material we’ll use.
Trusted Brands We Service in Canyon Lake
We stock and work with a short list of professional-grade chimney materials: Olympia Chimney, Famco, Copperfield, and DuraFlex. That’s deliberate. When your flue cap, damper, liner, or flashing fails, the replacement part should be a known name with documented performance in humid climates. We keep common Canyon Lake repair parts on the truck, which means many flashing and cap jobs get completed on the first visit instead of a week later. Chimney Repair work on lakefront homes demands materials that can handle constant damp air and wind-driven rain, and the brands we carry are chosen for exactly that.
Common Chimney Repair Problems We See in Canyon Lake Homes
- Rusted dampers and chimney caps. The shoreline humidity in Comal County means dampers and caps rust out faster than in drier Hill Country towns, even on chimneys that go a season without a fire. Once a damper seizes, the flue can’t be closed properly, and the whole system pulls moisture year round.
- Spalling chimneys crowns and softened mortar. Blowing rain off the lake saturates brick and stone, then the Texas sun bakes it. The freeze-thaw cycle may not be harsh here, but the wet-dry cycle is, and it breaks down mortar joints faster than most Canyon Lake homeowners expect.
- Creosote buildup from occasional, low-temperature fires. Homes that burn only a few times each winter tend to produce more creosote per fire than those that burn hot and regularly. In an older unlined flue, that creosote flakes off as second-degree deposits that brushing won’t fully remove and that only a camera inspection will show.
- Animal entry during skipped seasons. When a fireplace goes a full season without use, birds, squirrels, and raccoons find the flue. Nests block the draft and their droppings accelerate corrosion inside the flue. A proper cap and a screened chase cover prevent most of this, but only if they’re installed correctly and inspected after storms.
Pricing for Chimney Repair in Canyon Lake, TX
Here’s what Canyon Lake homeowners can expect for common repairs: mortar repointing and tuckpointing runs $220 to $480 for a standard repair area, spalling brick replacement typically lands between $300 and $700 depending on how many bricks need to come out, chimney waterproofing runs $250 to $500, flashing repair runs $350 to $750, and a liner installation runs $1,800 to $3,200. Partial or full chimney rebuilding starts at $3,000 and goes up based on height, access, and whether the flue also needs work. The price you approve before we start is the price you pay. Call (830) 251-4560 for a free estimate, and we’ll give you the number in writing before booking.
We Also Serve Cities Near Canyon Lake
Our repair crews cover Canyon Lake and the surrounding corridors regularly. If you’re in New Braunfels, Bulverde, San Marcos, or Schertz, we run the same written-price and guarantee system there. Just call the same number, (830) 251-4560, and we’ll route the right technician to your side of the county.
Serving Canyon Lake, TX - Our Local Coverage Area
We’re based in the Canyon Lake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Canyon Lake
If you build fires at all, yes, an annual Level 1 inspection is the right cadence, because moisture and animals enter chimneys whether you burn or not, and a camera check is the only way to see what’s inside the flue before it becomes a fire or carbon monoxide problem. That said, if you never burn and the chimney is capped and sealed, a Level 1 every other year may be sufficient. We’ll tell you plainly when work can wait. Call (830) 251-4560 for a straight answer on your specific chimney.
Every job gets a written flat price before we start any work, covering labor, materials, and disposal. You approve it, we do the work, and you pay when the job is done and you’ve seen the photo report. There’s no deposit and no line item that appears after the fact. If the repair is covered under our 365-Day Done Right Promise and fails within the year, the return visit is free.
A brushing removes surface creosote, but a camera shows what’s behind it: cracked flue tiles, second-degree creosote flaking on unlined masonry, rusted damper assemblies, and animal nests pushed deeper into the flue. In Canyon Lake’s damp air, moisture damage inside the flue is common even when the firebox looks fine. The photo report we give you documents exactly what we see so you can make a decision with your own eyes.
Yes. Flashing and cap replacement are two of the most common repairs we make on the shoreline and along Cranes Mill Road and the FM 2673 corridor. Lakefront homes get wind-driven rain that fails standard flashing faster than inland homes. We use Copperfield and Gelco flashing products plus stainless caps chosen for that exposure. The written quote covers both repairs together when they need to be done at the same time.
Spalling brick on an exterior surface that isn’t letting water into the home can often wait a season, and minor mortar cracks on the outer face of the chimney are usually cosmetic, not urgent. What cannot wait: a damaged liner, a rusted-through damper in an operating fireplace, flashing that’s already leaking into the attic, or any condition a camera inspection shows as a fire or gas risk. Call (830) 251-4560 for an inspection and we’ll give you the honest priority order in writing.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Canyon Lake under The Garrison Standard since 2002.
For a free estimate on chimney repair in Canyon Lake, TX, call (830) 251-4560 today. A live person answers, we’ll put the price in writing before any work begins, and every repair carries the 365-Day Done Right Promise.