Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Clovis
Chimney repair in Clovis is a seasonal reality, not an emergency surprise. Most Clovis homes need mortar work, cap replacement, or flue resurfacing at some point, and the work almost always costs between $300 and $1,950 depending on what the camera finds. We serve the entire Clovis area, from Old Town Clovis to Harlan Ranch, and we put a written price in your hand before any tool comes off the truck. Call (830) 251-4560 and you’ll reach a live person, not a voicemail tree.
Flint Chimney Sweep has repaired chimneys in Clovis for years, and we know what the valley’s dry heat and winter inversions do to masonry. Our crews are background-checked and uniformed. We schedule Clovis calls Monday through Saturday, and we arrive inside the window we give you. No exceptions.
Why Flint Chimney Sweep Is Clovis’s Preferred Chimney Repair Company
Clovis homeowners call us because they’ve been burned before, literally or financially. They’ve had a chimney company quote one price over the phone, then ask for $600 more after peeking into the flue. Our process removes that possibility. We quote a flat price before any work begins, and that’s the price you pay. It’s written down. That’s The Garrison Standard, the same code every Garrison Partners location follows.
We’ve been part of the Garrison Partners family since 2002, and Hank Delano runs the operation with a tradesperson’s discipline: show up, inspect, document, and fix only what needs fixing. The 365-Day Done Right Promise backs every repair we make in Clovis. If a covered repair fails within one year, we return at no charge. That’s not a sales line. It’s in writing on every invoice.
When you call us, a live person answers. Day or night. You don’t get a callback form or an automated menu. You get a person who can schedule you, answer a question, or tell you what a repair typically costs in Clovis. That matters when you’ve got water staining around your firebox and you need a straight answer at 9 p.m.
We also know Clovis building patterns. Much of the housing stock off Clovis Avenue and in the neighborhoods around Sierra Vista Mall dates from the 1960s and 1970s, and those chimneys are hitting the age where crown cracks and flashing failures start showing up. Our Chimney Repair team sees it every week. The same houses that need roof work after valley heatwaves start needing chimney crown repair shortly after.
Chimney Cap Installation in Clovis
Chimney Cap Installation in Clovis typically costs $280 to $680, including the cap and labor. The first thing we do is measure the flue tile dimensions. A lot of Clovis chimneys have non-standard tile sizes, especially on the older homes in the Quail Lakes and Wawona Ranch areas, so we carry caps in multiple sizes and fabricate what we don’t have.
Why a Cap Matters in This Climate
Clovis winters bring rain, and summers bring 100-degree heat waves. A missing cap lets both in. Rainwater pools on the smoke shelf and soaks into the firebox masonry. Intense summer heat then bakes that moisture, causing spalling and cracked mortar. A properly fitted cap stops that cycle before it starts.
Which Caps We Use
We install Olympia Chimney and Copperfield caps because they hold up in valley weather. Galvanized steel rusts in a few seasons here. Stainless steel or copper lasts decades. We’ll show you the cap before we install it, and the price includes sealant and fastening hardware.
Chimney Cap Replacement in Clovis
Chimney Cap Replacement in Clovis runs from $230 to $640, depending on flue size and whether the old cap left rust stains or damaged crown mortar we need to patch. If you hear birds in the flue or see rust streaking down the brick, it’s time to look at replacement rather than re-tightening.
What Replacement Involves
We remove the existing cap, inspect the flue tile edge for chips or cracks, and check that the crown slope still sheds water. If the crown has spalled, we’ll quote that repair separately, and you’ll approve the number before we proceed. The new cap gets mechanically fastened, not just slid on. Valley wind gusts during winter storms will carry away a loose cap in one night.
When to Replace Instead of Repair
A cap with a bent screen or a single rusted corner can sometimes be repaired. But Clovis sun and rain beat on these caps year-round. If the mesh is pulling away from the frame or the spark arrestor has corroded through, replacement is the honest answer. We’ll tell you which one applies, with photos to back it up.
Trusted Brands We Service in Clovis
We install and work with chimney products from manufacturers that Clovis homeowners can research independently. That includes DuraFlex for flue liners, HeatShield for resurfacing, Gelco for caps and chase covers, Olympia Chimney, Famco, and Copperfield. We keep common cap sizes and liner components stocked for Clovis jobs, which means less waiting on parts and fewer second visits. When we specify a material, it’s because the job calls for it, not because the margin looks better. You’ll see the brand name on your written quote before you approve anything.
Common Chimney Repair Problems We See in Clovis Homes
- Second-degree creosote buildup. Clovis residents burn a lot of pine and softwood during winter inversions, and pine creates flaky, crunchy creosote faster than hardwood. If it isn’t removed annually, it can transition to third-degree glaze, which is harder to remove and increases chimney fire risk.
- Spalling brick and cracked crowns. Long, dry, hot summers bake moisture out of chimney masonry. The result is brick faces popping off and mortar joints crumbling. We see this most on the 1950s and 1960s ranch homes in Old Town Clovis and the neighborhoods off Ashlan and Bullard.
- Missing or undersized caps. Birds, squirrels, and debris get into uncapped flues every year in Clovis. A nest near the flue opening reduces draft and pushes carbon monoxide back into the house. It’s one of the more common findings on our Level 2 camera inspections.
- Flashing gaps and rusted dampers. Valley rainstorms work their way under worn flashing and rust out the damper assembly. The result is water in the firebox and a damper that won’t seal. In the Old Town Clovis area, we repaired a chimney on a 1950s ranch home where the firebox mortar was crumbling and the damper was stuck open, causing a constant draft and high energy bills. Using HeatShield, we resurfaced the flue liner, replaced the damper, and installed a new chimney cap; the homeowner said the fireplace now draws properly and the living room no longer smells like smoke.
Pricing for Chimney Repair in Clovis, CA
Here’s what Clovis homeowners can expect, based on the jobs we do most often. Minor mortar repointing (tuckpointing) on a typical Clovis chimney runs $350 to $850. Flashing repair around the chimney base sits between $400 and $1,100. Chimney waterproofing after brick repair typically adds $250 to $600. A full chimney rebuild, which is rare but happens on severely spalled structures, starts around $3,000 and can go up from there depending on height and access. These are real numbers from this market, not national averages.
Every estimate is free. The price we quote is the price you approve, in writing, before any work starts. If the camera inspection reveals something we didn’t see from the ground, we stop and quote the additional work separately. You never get a surprise invoice. The dispatch and scheduling for our Clovis work is coordinated from the brand’s Fresno, Central Valley office; crews serve Clovis locally.
We Also Serve Cities Near Clovis
Beyond our work in Clovis, our crews cover nearby Fresno, Sanger, Fowler, and Madera. If you live just outside Clovis city limits, or you’re splitting time between the valley and the foothills, call us and we’ll confirm coverage. Scheduling works the same in every city we serve: written price, uniformed technician, and the 365-Day Done Right Promise.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Clovis
Once a year, per NFPA 211. The reason it matters more in Clovis than in, say, a coastal city, is that valley homeowners burn wood during winter air inversions, and softwoods like pine build creosote quickly. An annual inspection catches second-degree buildup before it becomes third-degree glaze. If you burn only gas logs and never wood, every other year is usually enough. Call (830) 251-4560 and we’ll help you figure out what your fireplace actually needs.
Spalling brick on the exterior, water in the firebox after rain, rust on the damper, or a smoke smell that lingers when the fireplace isn’t in use all point to repair, not just cleaning. Crumbling mortar joints on the crown are another tell. If you see any of these, a Level 2 camera inspection will show us exactly what’s going on inside the flue, and you’ll get a photo report you can look at yourself.
Yes, but it takes different tools and more time than a standard sweep. We use rotary chains and chemical treatments to break down third-degree glaze. The cost is higher than a standard sweep, and we’ll quote it before we start. It’s a common situation in Clovis because of the pine burned during winter inversions. Call (830) 251-4560 for an exact quote, and we’ll tell you what’s removable and what might require a liner resurfacing instead.
No. A proper repair starts with a camera inspection and a written quote, and we don’t rush that process. What we do offer is scheduled service that shows up on time, inside the window we give you. Most Clovis repair jobs are scheduled within a week. Emergency situations, like a chimney fire or active water intrusion, get priority scheduling.
DuraFlex for liners, HeatShield for flue resurfacing, and Olympia Chimney, Famco, and Copperfield for caps and components. We stock common Clovis flue sizes and cap dimensions locally, so most replacements don’t require waiting on a parts order. You’ll see the exact product name and spec on your quote.
Key Takeaways
- Most chimney repairs in Clovis run between $350 and $1,950, with caps at $230 to $680 and rebuilds starting around $3,000.
- Every job gets a written price before any work starts, and every repair carries the 365-Day Done Right Promise.
- Clovis’s dry heat and winter inversions accelerate spalling and creosote buildup, which is why annual inspections matter here.
- We don’t do same-day repairs; we do scheduled, documented work that shows up on time.
- Call (830) 251-4560 for a free estimate, and a live person will answer.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Clovis and the Central Valley.