Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Colorado Springs
Chimney repair in Colorado Springs typically runs $180 to $2,400 depending on what’s actually wrong, and most masonry work here starts with freeze-thaw damage to mortar joints and crowns rather than flue liner failure. That’s the honest starting point. We repair chimneys all over Colorado Springs, from Briargate to Old Colorado City to the Broadmoor area, and our crews know the local housing stock well enough to tell you exactly what you’re looking at before you spend a dime. Call (830) 251-4560 and we’ll put a written price in your hands before any work begins.
Why Flint Chimney Sweep Is Colorado Springs’s Preferred Chimney Repair Company
We’re part of the Garrison Partners family, founded in 2002, and we operate under The Garrison Standard: written price first, written guarantee always, background-checked and uniformed technicians on every call. Colorado Springs homeowners tend to appreciate that more than most, because this market has its share of no-show crews and price-at-the-door games. We don’t play either. When you book with Flint Chimney Sweep, you get a live person on the phone 24/7, a crew that arrives inside the window we give you, and a repair guarantee in writing for a full year.
Hank Delano runs our chimney repair operation, and he insists on one thing above all: no work gets approved without camera evidence the homeowner can see. If we tell you a flue liner needs replacing, we show you the cracked tile or the failing joint on the inspection screen before you approve a dollar of the repair. That’s not a sales tactic. That’s how you know the number on the invoice matches the problem in your chimney. And if a covered repair fails within 365 days, we come back and fix it at no charge, no argument.
Chimney Repair Companies in Colorado Springs
Chimney Repair companies in Colorado Springs do a lot of crown work and masonry restoration, because the Front Range climate beats up mortar faster than nearly anywhere else in the state. When a homeowner in Colorado Springs calls us for repair, the job usually involves one of three things: a cracked or spalling chimney crown, deteriorated mortar joints letting water into the smoke chamber, or a damper rusted shut from years of moisture intrusion. A standard crown repair with waterproofing runs $350 to $700. Flashing repair typically lands between $250 and $500. Full flue relining using DuraFlex stainless steel runs $1,800 to $3,200 depending on flue length and access.
Crown and Cap Work
Most Colorado Springs homes built before 1990 have poured concrete crowns that crack under freeze-thaw stress. We repair the crown, apply a professional-grade sealant, and install a proper chimney cap if the flue is open. That cap matters more here than in most markets, because wind-driven debris and animals move through the wildland-urban interface constantly.
Damper and Flue Repairs
A rusted damper rarely fails on its own. It fails because water gets past a cracked crown or failed flashing and pools in the smoke chamber. We fix the water entry first, then replace the damper. If the flue liner shows hairline cracking or second-degree creosote damage, we’ll recommend a Level 2 camera inspection before any liner decision gets made.
Chimney Masonry Repair in Colorado Springs
Chimney Repair in masonry terms means repointing mortar joints, repairing spalled brick, rebuilding shoulders, and waterproofing the exterior. In Colorado Springs, where winter nights drop below freezing after warm afternoons, water gets into hairline cracks and expands. Over ten or twelve seasons, that expansion pushes bricks apart. We see it constantly in neighborhoods like Skyway, Patty Jewett, and along Austin Bluffs Parkway where homes went up in the 1950s through 1970s.
Tuckpointing and repointing in Colorado Springs typically runs $15 to $25 per square foot of wall area. Spalling brick replacement lands between $40 and $90 per brick depending on access to the chimney. Full chimney waterproofing with a breathable sealant like ChimneySaver runs $300 to $600 for a single flue. We’ll tell you plainly if brick work can wait a season, and we’ll tell you when it can’t.
Freeze-Thaw Masonry Deterioration
Colorado Springs sits at 6,035 feet, and the temperature swing here is aggressive. Mortar absorbs moisture, water freezes, ice pushes the joint apart. That’s the failure pattern for most of the masonry work we bid in this city. If you’re seeing sand and grit at the base of your chimney, that’s mortar or spalled brick failing, and it’s worth a look before the fire season.
Chimney Rebuilding Above the Roofline
When freeze-thaw damage is too far gone, we rebuild the chimney from the roofline up. That runs $1,200 to $3,000 depending on height and brick availability. We’ll show you photos of the damage before you make that call, because some crews push a rebuild when repointing would do the job. We’d rather show you the evidence and let you decide.
Trusted Brands We Service in Colorado Springs
We stock and install DuraFlex stainless steel liners, HeatShield cerfractory sealant, Gelco chimney caps, Olympia Chimney components, and Famco dampers. That matters because a Colorado Springs homeowner shouldn’t wait a week for parts when a repair is already scheduled. Our trucks carry the common components, and we quote materials by spec, not by whatever happens to be on the shelf. If a repair calls for a specific liner diameter or cap size, that’s what goes on the written estimate and that’s what gets installed.
Common Chimney Repair Problems We See in Colorado Springs Homes
- Cracked chimney crowns from freeze-thaw cycling. Colorado Springs goes through dozens of freeze-thaw events each winter, and every one of them stresses a poured concrete crown. Once cracked, water enters the chimney system and rusts the damper, spalls the brick, and eventually cracks the flue liner.
- Uncapped flues collecting debris and animals. Homes near Palmer Park, Garden of the Gods, and the foothills along Highway 24 sit in the wildland-urban interface. Raccoons, squirrels, and wind-driven pine needles find open flues constantly. The fix is a cap, not a more aggressive brushing.
- Third-degree creosote glaze missed by brush-only sweeps. This is the one that worries us most. A brush skims tar glaze without removing it. Homeowners think they’re clear because the sweep happened. The next hot fire can ignite what’s still on the liner. That’s why we run a camera after every sweep in Colorado Springs.
- Lifting flashing around the roofline. Hail and high wind along the Front Range work flashing loose over time. Homeowners often mistake the resulting leak for a roof problem. It’s usually a chimney repair, and the fix runs $250 to $500 when caught before the decking rots.
Pricing for Chimney Repair in Colorado Springs, CO
Most repair work in Colorado Springs falls into clear ranges: mortar repointing runs $15 to $25 per square foot, crown repair with waterproofing $350 to $700, flashing repair $250 to $500, damper replacement $180 to $400, and full stainless flue relining $1,800 to $3,200. What moves the number is access, height, and the condition of the surrounding masonry. We give you a written price before any work starts, and that price doesn’t change at the door. Call (830) 251-4560 for a free estimate, and we’ll send a technician who shows you the damage on camera before you approve anything.
We Also Serve Cities Near Colorado Springs
Our Colorado Springs crews also cover Colorado Springs and the surrounding Front Range communities. If you’re in Denver, Boulder, Greeley, or Fort Collins, you’re within our service area and get the same written price and 365-Day Done Right Promise. Scheduling is coordinated through our Denver office, and our local crews handle the work on-site.
Serving Colorado Springs, CO - Our Local Coverage Area
We’re based in the Colorado Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Colorado Springs
Every year. The NFPA 211 standard says annual inspection regardless of burn frequency, and in Colorado Springs that’s practical advice, not a sales pitch. Our weather, wildlife, and wind put stress on chimneys even when the fireplace sits dark. A Chimney Inspection - Colorado Springs runs $150 to $250 and catches crown cracks, cap damage, and animal intrusion before they become $2,000 repairs. Call (830) 251-4560 and we’ll schedule yours.
Third-degree creosote is a glaze that a standard brush cannot remove safely. It’s baked onto the liner, and removing it requires mechanical or chemical treatment along with a camera inspection to confirm the liner hasn’t already been damaged. In Colorado Springs, where fire seasons are dry and often windy, we treat glazed creosote as a repair issue, not a sweep add-on. If the liner is compromised, we’ll show you the video and give you a written quote for HeatShield restoration or a DuraFlex liner before any work starts.
Every repair includes a written price agreed before work starts, a camera inspection with photos you can see, and a one-year written guarantee under the 365-Day Done Right Promise. If the repair fails within that year, we return and fix it at no charge. The price on your estimate is the price on your invoice. That’s The Garrison Standard, and it applies to every job in Colorado Springs, no exceptions. Call (830) 251-4560 for a free estimate.
Not usually an emergency, but it becomes one if you wait through a winter. A hairline crack lets water in, and each freeze-thaw cycle widens it. In Colorado Springs, one season of neglect can turn a $500 crown repair into $2,000 of masonry restoration. If the crack is leaking into the house or the crown is actively spalling, that’s urgent. Otherwise, schedule it before October and you’ll save real money. We’ll give you an honest read on timing when we inspect.
We don’t promise same-day repair, because the work should never start without a proper inspection and a written estimate you’ve had time to review. What we do offer is fast scheduling and a live person on the phone 24/7. Most repair visits in Colorado Springs get scheduled within a few days, and we’ll give you a clear arrival window before the crew comes out. If it’s dangerous, we’ll tell you that directly and prioritize you.
Call (830) 251-4560 for a free chimney repair estimate in Colorado Springs. We’ll put the price in writing before any work starts, show you the damage on camera, and stand behind the repair for a full year. That’s how we’ve done every job since 2002.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Colorado Springs as part of the Garrison Partners family since 2002.