Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Dallas
Chimney repair in Dallas usually starts with water, not fire. Hail and spring storms crack chimney crowns, dent caps, and let moisture chew through mortar joints until the flue liner itself is at risk. Flint Chimney Sweep fixes that. We arrive at Dallas homes with a written price before any work starts, run a camera inspection so you see exactly what we see, and back every repair with a written one-year guarantee. If you’re seeing mortar crumbs in the gutter, water stains by the fireplace, or a cap that looks like a golf ball after a hailstorm, call (830) 251-4560 and we’ll tell you straight what needs fixing now and what can wait.
Why Flint Chimney Sweep Is Dallas’s Preferred Chimney Repair Company
Dallas homeowners have dealt with enough chimney companies that no-show, change the price at the door, or recommend a $6,000 rebuild without a single photo to justify it. We run a different operation. Since 2002, Flint Chimney Sweep has been part of the Garrison Partners family, and every job follows The Garrison Standard: written pricing before work begins, background-checked and uniformed technicians, and a 365-Day Done Right Promise in writing on every repair. The price on the invoice is the price you approved. Nothing else.
Our crews know Dallas housing stock. We work on 1950s Lakewood ranches with original clay liners, 1980s brick two-stories in Richardson and Garland with crown cracks from forty years of hail, and newer construction in Far North Dallas where the cap was builder-grade and didn’t survive the first bad storm. Level 2 inspections here routinely reveal hail damage that has nothing to do with how often you burn a fire. The live person who answers our phone 24/7 can book a Dallas appointment without routing you through voicemail trees. Call (830) 251-4560 and you’ll talk to a person, not a recording.
Chimney Masonry Repair in Dallas
Chimney Masonry Repair in Dallas is the most common repair we perform, because hail doesn’t just dent caps; it pits and cracks the mortar crown that seals the top of the chimney stack. Once water gets through that crown, it tracks down the flue liner, rusts the damper, and loosens the mortar joints in the firebox and smoke chamber. By the time a homeowner notices flaking brick on the hearth or mortar crumbs on the roof, the damage has usually been running for a season or two. A standard mortar repointing job on a Dallas chimney runs $400 to $900, while a full chimney crown repair with waterproof sealant typically runs $600 to $1,400 depending on access and the extent of spalling.
Crown Repair and Repointing
We repair chimney crowns with a proper cementitious crown mix, then coat them with a breathable waterproof sealant from Gelco. That keeps the freeze-thaw and wet-dry cycle that Dallas weather imposes from reopening cracks the next spring. Repointing involves cutting out loose mortar joints to a depth of about three-quarters of an inch and packing in fresh mortar matched to the original color and hardness. The goal is structural, not cosmetic, and the photo report shows the difference.
Spalling Brick and Firebox Repair
Spalled brick, where the face of the brick pops off, is a water problem before it’s a firebox problem. We see it on south-facing chimneys in Dallas that get baked by afternoon sun and then soaked by storms. When the firebox mortar has loosened from repeated wet/dry cycles, we repair it with HeatShield, a rated chimney repair material that restores the firebox and smoke chamber without a full rebuild. The repair is documented with before and after photos, and it’s covered by the written one-year guarantee.
Chimney Cap Installation in Dallas
Chimney Cap Installation in Dallas is not a cosmetic add-on. It’s the first line of defense against what North Texas weather does to an open flue. A proper stainless steel cap keeps rain, hail, leaves, squirrels, and birds out of the chimney, and it stops the draft from pulling your heated air out of the house in winter. We install caps from Olympia Chimney and Copperfield, both built to take direct hail strikes without denting through. A standard stainless cap with installation runs $350 to $750 in Dallas; a custom multi-flue cap for a wider chimney typically runs $600 to $1,100. The written quote includes the exact cap model and size before we order anything.
Storm-Damage Cap Replacement
After a Dallas hailstorm, we get calls from neighborhoods like Lakewood, M Streets, and Preston Hollow where caps are dented, torn off, or sitting crooked from wind gusts. Even a small dent changes how the cap sheds water and can create a drip point into the flue. We match the replacement to the current flue size and the home’s exposure, not the builder’s original choice. If the old cap failed in a storm, the new one gets a stronger spec.
Animal and Debris Protection
Squirrels and raccoons are a real issue in Dallas neighborhoods with mature trees, and an uncapped flue is an open door. A properly fitted cap with a mesh screen keeps animals out without restricting draft. We also see caps crushed by falling limbs during the wind storms that roll through in March and April. The fix is a simple cap replacement, and we always check the flue liner with a camera while we’re on the roof.
Trusted Brands We Service in Dallas
We work with professional-grade materials and we name them on the written quote so you can verify quality independently. For chimney cap replacement, we install Olympia Chimney and Copperfield caps, both built for hail exposure. For firebox and smoke chamber repair, we use HeatShield, a cerfractory material specifically rated for chimney fire and flue gas exposure. For crown waterproofing, we use Gelco sealant, which breathes so trapped moisture escapes instead of pushing the coating off. When we quote a Dallas repair, the brand name is on the line item, not just “replacement cap” or “sealant.” That matters if you want to check what you’re paying for.
Common Chimney Repair Problems We See in Dallas Homes
- Hail-damaged crowns. Spring hail pits and cracks the mortar crown that seals the top of the chimney. The crack lets water track down to the flue liner and rust the damper, which is a slow failure most homeowners don’t notice until the next rain finds the ceiling joint.
- Dented or missing caps. Wind and hail tear off cheap builder caps or dent them enough to redirect water into the flue. We regularly replace storm-damaged caps in Dallas in April and May, and the damage is easy to see from the ground once you know what a healthy cap should look like.
- Spalling fireboxes from wet/dry cycling. Dallas’s flash floods and dry heat cycle the mortar in the firebox and smoke chamber repeatedly. Loose mortar there can’t be fixed with a brush and a sweep, and it shows up on a Level 2 inspection as a safety item.
- Rusted dampers from water tracking down the liner. The damper sits right where crown leaks drip. Once it’s rusted open or shut, the draft is compromised and the fireplace stops drawing right. The repair is often paired with a crown fix and a new cap, not done alone.
Pricing for Chimney Repair in Dallas, TX
Here’s what Dallas homeowners can expect to pay. Mortar repointing runs $400 to $900. Crown repair with waterproofing runs $600 to $1,400. A standard stainless cap installation runs $350 to $750. Firebox and smoke chamber repair with HeatShield runs $1,200 to $2,800 depending on the square footage and how much loose mortar needs to be cut out. A full chimney rebuild starts around $4,000 and goes up from there based on height, access, and brick matching. The written price you get before we start is the price you pay, and every repair carries the 365-Day Done Right Promise. Call (830) 251-4560 for a free estimate and we’ll show you the damage on camera before recommending anything.
We Also Serve Cities Near Dallas
Our repair crews cover Dallas and the surrounding metro. If you live in Irving, Duncanville, Balch Springs, or Mesquite, you get the same written price, the same camera inspection, and the same one-year guarantee. Scheduling is coordinated from our Dallas-Fort Worth office, and we dispatch locally, so a Dallas appointment doesn’t get bounced to another market. If this page doesn’t cover your specific neighborhood, our Chimney Repair page answers the broader questions.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Dallas
No, you don’t need an annual inspection in Dallas if you never burn wood and the chimney is purely decorative. Once every two to three years is enough for a Level 1 visual check, unless a hailstorm or wind event has hit your roof. After a significant storm, a Level 2 inspection makes sense because hail damage happens fast and you can’t see it from the ground. If you burn wood even occasionally, the answer is yes, once a year before the season. Call (830) 251-4560 and we’ll tell you honestly which level of inspection your situation calls for.
A Level 1 inspection is the visual check that comes with a standard chimney sweep, and it covers the accessible parts of the flue and fireplace. A Level 2 inspection adds a camera scan of the entire flue liner and is what you need for a repair quote in Dallas, because it shows crown cracks, spalling, and liner damage that a visual check alone will miss. A Level 3 inspection involves opening up the chimney structure and is only warranted if we suspect a hidden problem behind the masonry. For any repair quote we give in Dallas, we run a Level 2 camera inspection first.
Third-degree creosote is the hardened, tar-like glaze that forms when a chimney burns cool and wet. No brush removes it safely, and we won’t try. The fix is a chemical treatment or, in severe cases, a flue liner replacement with a product like DuraFlex rather than a full rebuild. In Dallas, we usually see this in older homes where the fireplace was used as a primary heat source and the chimney never got swept. After the treatment or reline, we run a camera scan to confirm the flue is clear. Call (830) 251-4560 for a straight answer on your liner’s condition.
We schedule storm-damage repairs in Dallas on a first-call, first-booked basis, and during spring hail season our calendar fills about a week out. We don’t promise same-day service, because a proper repair requires a written quote, ordering the right cap or crown material, and doing the masonry work correctly, not rushing it. If your cap is torn off and rain is entering the flue, we’ll tell you how to temporarily cover it safely until we arrive. The free estimate comes with a camera report you can send to your insurance adjuster. Call (830) 251-4560 and we’ll get you on the board.
Yes, it matters, though a small dent in a stainless cap usually isn’t an emergency. The issue is that a dent changes how the cap sheds water, creating a low spot where rain pools and drips into the flue. Over time, that drip rusts the damper and can soak the liner. If the dent is small and the cap is still secure, you can wait until the next scheduled sweep and have it looked at. If the cap is cracked, loose, or letting rain in, it’s a repair we’d put higher on the list. We’ll give you an honest read on the phone, and the estimate is free.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Dallas since 2002.
Ready for a straight answer? Call (830) 251-4560 for a free chimney repair estimate in Dallas. We’ll put the price in writing before any work starts, show you the damage on camera, and back the repair in writing for a full year.