Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Everett
Chimney repair in Everett, MA typically costs between $450 and $3,800 depending on whether we’re repointing mortar joints, rebuilding a spalled crown, or relining the flue. Most repairs here come down to water getting where it shouldn’t, and Everett’s wet marine air is relentless about finding entry points. Our crews know the housing stock along Broadway, around Glendale Park, and up into the hills off Ferry Street. Call (830) 251-4560 and you’ll get a live person who can schedule a written, flat-price repair estimate, not a callback form.
Why Flint Chimney Sweep Is Everett’s Preferred Chimney Repair Company
Everett homeowners call us because we put the price in writing before any tool comes off the truck. That’s the Garrison Standard, and it applies to every job we book here, from a simple flashing reseal near Malden line to a full chimney rebuild off Chelsea Street. Our background-checked, uniformed technicians arrive inside the window given, work clean, and hand you a photo report from the camera inspection before you pay a dollar.
Hank Delano runs our repair crews with one rule: document everything. When we find a crack in an 8×12 terracotta flue on a pre-1950 home near Glendale Park, you see it on camera. When we recommend a HeatShield resurfacing or a Gelco crown coat, you know why. If a covered repair fails within a year, we return at no charge under the 365-Day Done Right Promise. No argument, no second invoice. That’s why neighbors here recommend us to neighbors in Revere and Medford.
Local Knowledge That Matters
Everett’s dense pre-1950 housing stock off Broadway shares a lot of the same 8×8 and 8×12 terracotta flue tiles. But the real local variable is the moisture. Puget Sound air sits wet against masonry for months. Crowns spall. Flashings fail at the roofline. Dampers rust open. We’ve seen the failure pattern enough times to spot it early and save you from a full rebuild later.
Chimney Repair Companies in Everett
Chimney Repair Companies in Everett fall into two camps: those that quote over the phone and move the number at the door, and those that put a written price in your hand before work starts. We’re the second kind. A typical repair here runs $450 to $3,800, and the price you approve is the price on the invoice. Period.
Flashing and Waterproofing
Everett’s steep-pitch roofs make chimney flashing the first casualty of a wet season. Water tracks down the chimney chase and into the attic, often showing no sign at the firebox until damage is already done. A reseal or replacement in Everett typically runs $450 to $1,200 depending on roof access and the condition of the surrounding brick.
Flue Relining and Crown Work
When the inner liner that channels smoke out of the house cracks, you need a flue relining. In Everett homes, damp air sitting in an unused flue accelerates that deterioration from the inside. We install DuraFlex and HeatShield systems sized to your existing terracotta, with most Everett jobs landing between $1,800 and $3,800.
Chimney Masonry Repair in Everett
Chimney Masonry Repair in Everett means fixing what the rain has been eating at for decades. Spalled brick faces, crumbling mortar joints, and crowns that have turned to grit are all standard findings here, and they’re driven by wet marine air, not freeze-thaw cycles like you’d see inland. Expect to pay $600 to $2,400 for most masonry repairs in this city, depending on how much brick needs to come out and go back in.
Mortar Repointing and Tuckpointing
When the mortar between bricks turns to sand, water gets behind the face and starts the spalling cycle. Repointing, replacing the damaged mortar joint by joint, runs $600 to $1,800 on typical Everett chimneys. Tuckpointing, the more detailed work of cutting out and replacing joints while matching the original profile, runs higher when the brick pattern is historic.
Spalling Brick and Rebuilding
Once a brick face pops off, the rest of the chimney follows within a few seasons if left alone. We cut out damaged brick, match it as closely as the supply houses allow, and relay the section. Partial rebuilds in Everett start around $1,200 and full teardown-and-rebuild work can hit $3,800. The written quote tells you exactly what’s coming out and what’s going back.
Trusted Brands We Service in Everett
We stock and install professional-grade chimney products that Everett homeowners can verify independently: HeatShield for flue resurfacing, Gelco for crown sealing, Olympia Chimney for caps and dampers, and Famco for termination hardware. When a repair near the 3000 block of Broadway called for a stainless cap and flashing reseal, we had the Olympia parts on the truck, not on order. That’s the difference between a one-visit fix and a two-week wait during a rainy stretch.
Common Chimney Repair Problems We See in Everett Homes
- Rain-driven spalling on the crown and brick. Our wet marine air is the main exterior killer here. Crowns turn to grit and brick faces pop off long before any freeze-thaw damage would show.
- Rusted or seized dampers. Damp air sitting in an unused flue through the long rainy season eats through damper hardware. A rusted-open damper is also a direct heat-loss route into the attic.
- Flashing failures at the roofline. Everett’s steep-pitch roofs put extra stress on chimney flashing, and the water tracks down into the attic rather than showing up as a firebox leak.
- Smoke chamber deterioration. In older homes off Broadway and around Glendale Park, the smoke chamber above the firebox is often parged with failing mortar that drops debris into the flue and disrupts draft.
Pricing for Chimney Repair in Everett, MA
Here’s the honest range for this market. Flashing reseals run $450 to $1,200. Mortar repointing runs $600 to $1,800. Spalled brick repair starts around $1,200 and a full chimney rebuild caps near $3,800. Flue relining with HeatShield or DuraFlex runs $1,800 to $3,800. What moves the number is access, how much masonry is failing, and whether the flue liner itself is compromised. Every job gets a written price before work starts, and the camera inspection that justifies the repair is part of the estimate. Call (830) 251-4560 for a free written quote.
We Also Serve Cities Near Everett
Our Chimney Repair crews work throughout the immediate area, including Malden, Chelsea, Revere, and Medford. If you’re just over the line from Everett and worried about chimney damage, the same written pricing and 365-Day Done Right Promise applies.
Serving Everett, MA - Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Everett
Once a year, and here’s the local reason: Everett’s wet marine air does more damage to an idle chimney than a working one. Damp sits in the flue, rusts the damper, and soaks the brick. A Level 1 inspection catches the rust and spalling before they become a $2,000 repair. Call (830) 251-4560 and we’ll schedule it around your calendar, not our sales targets.
A written price only follows a camera inspection of the flue, the firebox, and the exterior masonry. We don’t quote blind. You get a photo report showing what’s cracked, spalled, or rusted, and the written quote lists exactly what we’ll do about it. If the camera shows the chimney can wait, we’ll say so in plain words and you’ll pay nothing for knowing that.
No. We promise a booked window, a uniformed technician who arrives inside it, and a written price before work starts. Chimney repair in Everett is urgent in the sense that wet masonry fails over months, not hours. If you have an active leak, call (830) 251-4560 and we’ll schedule the earliest opening that fits the severity, not a promise no tradesman can actually keep.
Crown spalling, rusted dampers, and flashing failures. During a repair call near the 3000 block of Broadway, our tech pulled a Level 2 camera inspection into an 8×12 terracotta flue and found the firebox crown was spalling and the damper had rusted open from years of Puget Sound moisture. We installed an Olympia Chimney stainless cap, resealed the chimney flashing, and brushed out first-degree creosote. The client got a photo report showing the crack before and after the repair.
Yes, and we’ll put it in the camera report so you have something to hold onto. Hairline cracks in the exterior masonry with no water entry can usually wait a season. Light creosote on a chimney that’s only used occasionally can wait. But a cracked flue liner, a rusted-open damper, or flashing that’s letting water into the attic won’t improve on their own. When our tech says wait, it’s because the evidence says wait. When he says fix it, you’ll see why in the photos. Call (830) 251-4560 to book the inspection that answers it either way.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Everett residents with written, guaranteed chimney repair.