Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Farragut
Chimney repair in Farragut usually costs between $275 and $2,900 depending on what’s actually wrong, and a proper diagnosis starts at the top of the chimney, not the firebox. That’s the pattern we see in Farragut week after week: cracked crowns, corroded caps, and failed flashing show up long before the flue liner becomes the problem. Flint Chimney Sweep serves every Farragut neighborhood, from Village Green to Choto and across the Campbell Station corridor. Our techs know this housing stock and the storm patterns that beat on these chimneys. Call (830) 251-4560 for a written quote before any work starts.
Why Flint Chimney Sweep Is Farragut’s Preferred Chimney Repair Company
Farragut homeowners have a particular dislike for vague pricing and no-show crews, and we built our process around that. Every repair starts with a camera inspection of the flue, crown, cap, and flashing. You get a photo report and a written price before a single tool comes off the truck. The number on the invoice is the number you approved. That’s The Garrison Code, the same standard every Garrison Partners location follows, and it applies in Farragut the same as anywhere else.
Our technicians are background-checked and uniformed, so when someone walks up your driveway on Turkey Creek Road or Grigsby Chapel, you know exactly who they are. A live person answers our phone 24/7. No voicemail trees, no callbacks. Hank Delano leads our repair crews, and the 365-Day Done Right Promise means every repair in Farragut carries a written guarantee valid for one full year. If a covered repair fails, we return at no charge.
Dispatch and scheduling for Farragut are coordinated from our Memphis office, but crews work locally here. We carry common parts on the truck, like Copperfield caps and HeatShield resurfacing material, so many repairs are completed on the first visit. That matters in a town where scheduling a second trip means another afternoon off work.
Chimney Masonry Repair in Farragut
Chimney Masonry Repair in Farragut means rebuilding the structural brick and mortar shell of the chimney, typically starting at the crown. Most Farragut homes with original masonry chimneys are now 25 to 40 years old. Mortar joints have been through four decades of Tennessee freeze-thaw cycles, and the crown bond line is where water gets in first. A typical masonry repair in Farragut runs $450 to $1,800 depending on how much brick needs to be cut out and replaced.
Mortar Repointing and Tuckpointing
We rake out deteriorated mortar joints and pack in fresh mortar matched to the original color and hardness. Tuckpointing is the finer cosmetic version, used when the joints are still structurally sound but the face is crumbling. In Farragut’s older brick subdivisions, this is the difference between a chimney that looks cared for and one that’s quietly taking on water.
Spalling Brick and Partial Rebuilding
Spalling is when moisture inside the brick freezes and pops the face off. Once a brick spalls, it absorbs water faster and accelerates damage to the bricks around it. If we catch it early, we cut out the damaged units and set new brick. If the damage extends into the chimney chase, a partial rebuild from the roofline up is often the right call. That usually runs $900 to $2,900 in Farragut.
Chimney Cap Installation in Farragut
Chimney Cap Installation in Farragut is the single highest-return repair we do, because Farragut’s spring storm season is brutal on caps. A standard stainless cap with a screened spark arrestor runs $275 to $650 installed, depending on flue size and whether we’re also correcting the crown pitch. A custom Copperfield stainless cap on a larger stone chimney may run up to $900.
Replacing a Corroded or Missing Cap
Farragut gets enough wind and rain that a thin, factory-original cap often fails within a decade. Once the cap is gone, rain pours straight into the flue and sits in the smoke chamber. A wet flue accelerates spalling and can crack a terra cotta liner within a few seasons. We replace the cap with a professional-grade model sized to the flue, not a universal fit that rattles in the wind.
Caps With Draft and Animal Protection
A good cap does three jobs: keeps rain out, keeps animals out, and keeps sparks from landing on the roof. Squirrels and raccoons love uncapped chimneys in Farragut’s tree-heavy neighborhoods like Choto and Fox Run. A screened cap stops that before you’re dealing with a nest blocking the flue.
Trusted Brands We Service in Farragut
We install and service the brands we’d put on our own homes. HeatShield is our go-to for resurfacing damaged flue liners without a full rebuild. Gelco and Olympia Chimney caps and chase covers hold up to Farragut’s wind and rain. We keep common parts stocked for Farragut jobs, which means fewer second trips and a faster turnaround when your cap has failed or your crown is cracked.
Common Chimney Repair Problems We See in Farragut Homes
- Wind-damaged and rusted caps. Farragut’s spring storms peel thin caps right off. Once the cap is gone, water runs straight into the flue and starts eating at the liner.
- Cracked crowns at the bond line. The mortar bed where the crown meets the brick is the first place water breaches. From there, moisture wicks down into the chimney chase and rusts damper and firebox steel from the inside.
- Third-degree creosote glazing. Farragut’s milder winters mean more low, slow burns. The creosote glazes onto the flue wall and a standard brush pass won’t remove it. The liner needs to be resurfaced with HeatShield or replaced before the next fire.
- Failed flashing at the roofline. Flashing installed with the roof two or three decades ago is often cracked, lifted, or sealed with old caulk. A leaking chimney in Farragut is more often a flashing problem than a masonry problem.
Pricing for Chimney Repair in Farragut, TN
Cap installation runs $275 to $650. Mortar repointing and tuckpointing run $450 to $1,200. Flashing repair runs $350 to $800. A full crown rebuild runs $600 to $1,400, and a partial chimney rebuild starts around $900 and can reach $2,900 on a two-story Farragut home with a steep roof. What moves the price is access, materials, and whether we’re replacing brick or just joints. We quote the job in writing before any work starts. Call (830) 251-4560 and we’ll schedule a camera inspection and give you a fixed number.
We Also Serve Cities Near Farragut
Farragut sits close to several communities we cover regularly. If you’re in Knoxville, Franklin, Murfreesboro, or Nashville-Davidson, our Chimney Repair crews are already working those areas. Call (830) 251-4560 and a live person will handle your scheduling.
Serving Farragut, TN - Our Local Coverage Area
We’re based in the Farragut area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Farragut
Every time you buy the home, after a chimney fire or major storm, and whenever the chimney hasn’t been used in several years. The average Farragut homeowner with an active fireplace should have a Level 2 inspection every 3 to 5 years, more often if the home has a second-story chimney exposed to heavy wind from the west. Call (830) 251-4560 to schedule.
You get a ballpark over the phone, but the written price is based on what the camera inspection shows. That’s the honest way to do it. A cap replacement runs $275 to $650. A crown rebuild runs $600 to $1,400. You’ll get the exact number in writing before any tools come off the truck, not after we’re already on the roof. Call (830) 251-4560.
You see photos of the flue liner, smoke chamber, damper, crown, cap, and flashing from the inside, along with a written report of anything that’s broken, cracked, blocked, or glazed. Nothing gets recommended without a photo you can look at yourself. If a repair can safely wait, we say so.
If the cap is missing or the crown is cracked open, repair should happen before the next heavy rain. Water intrusion compounds quickly. If the issue is moderate creosote buildup and the flue is otherwise sound, it can usually wait a few weeks. If there’s third-degree glaze or a cracked liner, do not burn until it’s addressed. Call (830) 251-4560 and we’ll tell you straight.
A sweep removes soot and creosote from the flue. A repair fixes a structural or water problem: cracked crowns, corroded caps, failed flashing, damaged brick, or a compromised liner. Many Farragut calls start as a sweep and end up as a repair once the camera finds what a brush can’t fix. We quote both separately, in writing.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Farragut and surrounding communities.
If your chimney in Farragut needs a cap, a crown, tuckpointing, or a liner, call (830) 251-4560 today. We’ll schedule the inspection, send a uniformed tech to your door, and put the price in writing. A live person answers, day or night.