Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Fulton
Chimney repair in Fulton typically runs between $250 and $1,800 depending on what’s actually wrong, and most jobs are completed in a single visit once we’ve inspected the flue with a camera and put a written price in your hand. If you’re noticing water stains near the firebox, spalling brick on the exterior chimney stack, or a smoky fireplace that used to draw fine, call (830) 251-4560. We serve every neighborhood in Fulton, from the homes along Pindell School Road to the newer developments off Lime Kiln Road, and we bring the same discipline to every call: background-checked technicians, a written price before any work starts, and a 365-day guarantee on every repair.
Why Flint Chimney Sweep Is Fulton’s Preferred Chimney Repair Company
Fulton homeowners call us because we document everything. Before a single tool comes off the truck, you get a written price for the exact scope of work. That means the number you approve is the number on the invoice. No exceptions. Hank Delano runs our crews under The Garrison Standard, the operating code every Garrison Partners location follows, and that code is simple: show up on time, do the work right, and stand behind it in writing for a full year.
Our technicians know Fulton’s housing stock. We see 1980s colonials off Scaggsville Road with original clay liners that are now spalling, and 1960s split-levels near Johns Hopkins Road where the crown flashing has been leaking for years. When a Fulton homeowner calls us about a damp firebox or a draft that’s reversed, we already know what we’re likely to find before we ring the doorbell. That local familiarity saves you time and money, because we don’t have to guess.
Every Fulton repair call gets a live person on the phone when you dial, around the clock. No voicemail trees, no “leave a message and we’ll call you back next Tuesday.” And every tech who shows up at your door is uniformed and background-checked, so you know exactly who’s walking through your yard.
Chimney Cap Replacement in Fulton
Chimney cap replacement in Fulton is one of the most common repairs we do, and it’s almost always tied to the leaf litter and acorn mast that falls from the Piedmont’s deciduous tree cover around homes here. A standard cap replacement in Fulton runs $350 to $650 installed, depending on the flue size and whether we’re dealing with a single-flue cap or a multi-flue cap for a larger masonry chimney.
When the Cap Fails
A missing or rusted-out cap lets rain pour straight down the flue, but in Fulton it also lets in squirrels. We regularly pull squirrel nests out of chimneys off Pindell School Road and Lime Kiln Road, especially in the fall when the acorns drop. A nesting squirrel will pack a flue with twigs and leaves in a matter of days, and that’s a fire hazard the moment you light a fire. If your cap is gone or damaged, don’t wait until burning season to deal with it.
Cap Hardware We Use
We stock caps and mounting hardware from Gelco and Olympia Chimney, and we specify the right product for your flue size and animal pressure. A stainless steel cap with a mesh screen keeps debris and animals out while allowing proper draft. If we find a cap that’s merely loose, we’ll re-secure it and tell you plainly whether it needs full replacement or has a few more seasons left in it.
Chimney Liner Installation in Fulton
Chimney liner installation in Fulton becomes necessary when the existing clay or metal liner inside the flue has cracked, spalled, or glazed with creosote that can’t be removed by brushing. A full stainless steel liner installation in Fulton runs $1,200 to $1,800 on average, and we use DuraFlex liners that are rated for wood-burning and gas appliances alike.
What a Failed Liner Looks Like
In older Fulton homes, we often see clay tile liners with cracks running vertically through the tile joints. You can’t see this from the outside, which is why we run a camera through the flue and show you the photos before recommending a liner. What looks like “just cosmetic” spalling brick around the smoke chamber is frequently a sign that the liner has already failed and the chimney is drafting into the masonry itself. That’s a carbon monoxide risk you can’t afford to defer.
The Install Process
We drop the DuraFlex liner down the existing flue, insulate it where needed, and connect it to the appliance or firebox. The job is usually done in a single day, and you get a written guarantee for one full year. If anything we install fails in that window, we come back and make it right at no charge. That’s the Garrison Standard, and we don’t bend it for anyone.
Trusted Brands We Service in Fulton
We don’t install whatever is left in the truck. For Fulton homeowners, we work with professional-grade chimney materials from HeatShield, Gelco, Olympia Chimney, and Famco. HeatShield is what we use for flue resurfacing when a full liner isn’t needed but the existing masonry needs to be re-sealed against heat and moisture. Famco caps and dampers show up when a Fulton home needs a top-sealing damper to stop warm air from leaking out of the house all winter. We keep common parts on hand so most Fulton repairs don’t wait on shipping.
Common Chimney Repair Problems We See in Fulton Homes
- Spalling brick and cracked crowns from Maryland’s freeze-thaw cycle. Fulton sits in the Piedmont, and the wet-dry swing of our winters means water gets into small cracks in the crown and freezes, splitting the mortar and brick face open. We see this on almost every un-repaired chimney over 20 years old in the 20759 zip code.
- Squirrel and bird nesting in uncapped flues. The tree cover around Fulton is dense, and an open flue is an invitation. We’ve pulled nests, acorns, and nesting material from chimneys throughout the Pindell School Road corridor. Proper caps and screening prevent it.
- Third-degree creosote glazing that a brush can’t remove. Some Fulton chimneys were only brushed, never evaluated. A tar glaze forms in the flue throat and upper liner that a standard sweep won’t touch. We show homeowners the camera footage so they can see it with their own eyes, then recommend either chemical treatment or a liner replacement.
- Rusted dampers from water intrusion. When a crown or flashing leaks, the damper is the first thing to go. A rusted damper that won’t seal lets heated air escape all winter and pulls smoke back into the room on cool mornings. We replace dampers and address the water entry point so the new one doesn’t rust out in two seasons.
Pricing for Chimney Repair in Fulton, MD
What you pay in Fulton depends on what the camera sees, but here are the ranges we quote most often. A chimney cap replacement runs $350 to $650. A standard crown repair runs $400 to $900, and a full chimney crown rebuild runs $800 to $1,400. Flashing repair runs $300 to $700. A DuraFlex liner installation runs $1,200 to $1,800. Mortar repointing (tuckpointing) runs $15 to $25 per square foot of masonry work. Every quote is in writing before work starts, and every repair carries the 365-Day Done Right Promise. Call (830) 251-4560 for an exact quote, no charge for the estimate.
We Also Serve Cities Near Fulton
Our crews work throughout Howard County and the surrounding area, including Columbia, Savage, Ellicott City, and Jessup. If you’re in one of those towns and need Chimney Repair, call the same number: (830) 251-4560. We dispatch from our Washington, DC office, and Fulton is in our regular service rotation every week.
Serving Fulton, MD - Our Local Coverage Area
We’re based in the Fulton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Fulton
Once a year if you burn wood, and that’s not a sales pitch, it’s what the National Fire Protection Association recommends. In Fulton specifically, the leaf litter and acorn mast from the Piedmont tree cover means caps and crowns clog faster here than in flatter parts of the county. If you only burn gas logs, an inspection every two years is enough. Call (830) 251-4560 and we’ll put you on a schedule that matches how you actually use your fireplace.
We start with a Level 2 camera inspection, which means a real video feed through the flue, not a flashlight and a guess. Then we walk you through the photos and show you exactly what’s there. After that, you get a written price. Not before. If we find something that doesn’t need repair, we’ll tell you that plainly. The point is to give you a straight answer, not to invent work. Call (830) 251-4560 to book an inspection.
Most homeowners can’t, and that’s fine. But if you see a shiny, tar-like glaze on the inside of your flue walls, that’s third-degree creosote and a brush will not remove it. That’s the point where you need chemical treatment or a liner evaluation. If you’re seeing that glaze in your Fulton home, call us before you burn again. We’ll run the camera and show you what it looks like from the inside.
Yes, and here’s why: the water that gets in through a missing cap doesn’t just drip into the firebox and evaporate. It runs down the flue walls, soaks into the brick and mortar, and then freezes during a Maryland winter night. That freeze-thaw cycle is what cracks crowns and spalls brick. Put a cap on it now. In Fulton, a cap replacement runs $350 to $650, and we can usually get it done in a single visit. Call (830) 251-4560 for a written quote.
If your cap is intact, your liner is uncracked, and your crown has no visible gaps, minor cosmetic spalling can wait. The problems you should not defer are water intrusion through the crown or flashing, a cracked liner, or a flue full of squirrel nesting. Those three things get worse every week, and the repair bill grows with them. If you’re not sure which category you’re in, one camera inspection answers it. Call (830) 251-4560 and we’ll give you a straight answer.
Call Flint Chimney Sweep for Chimney Repair in Fulton
We work the way you’d expect a disciplined tradesperson to work: on time, in uniform, with a written price in your hand before the work begins. Hank Delano and the Flint Chimney Sweep team serve every neighborhood in Fulton, from Pindell School Road to Lime Kiln Road and Scaggsville Road. Every repair is guaranteed in writing for one full year under the 365-Day Done Right Promise. If it’s not done right, we come back and make it right. No charge, no argument. Call (830) 251-4560 for a free estimate.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Fulton, MD.