Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Hendersonville
Chimney repair in Hendersonville typically runs $275 – $2,800 depending on what’s actually wrong, and the work starts with a written price before a single tool comes off the truck. We’re Flint Chimney Sweep, part of the Garrison Partners family founded in 2002, and we serve Hendersonville homeowners who want a straight answer, a camera inspection they can see, and a repair that holds. If you’re near Indian Lake, Drake’s Creek, or anywhere along Saundersville Road, call (830) 251-4560 and a live person answers – no voicemail tree, no callback form.
What most Hendersonville homeowners actually need isn’t a mystery bid or a pressure sale. It’s a proper look at the flue, a photo report showing the damage, and a price that doesn’t move at the door. That’s how we work. A standard chimney repair here often involves a cap that rusted through years ago, a liner that’s been spalling since the last cold snap, or flashing that finally let water into the chase. We identify it, show it to you, and write the number down before we start.
Why Flint Chimney Sweep Is Hendersonville’s Preferred Chimney Repair Company
Hendersonville’s housing stock is specific. Much of it was built between the 1980s and early 2000s, which means a lot of factory-built fireplaces and the original caps that came with them. Our technicians know these systems because we work on them constantly. We don’t need to guess how a builder-grade chase was framed; we’ve opened enough of them in subdivisions around Indian Lake and Saundersville Road to know what holds up and what fails first.
We run under The Garrison Code, the same standard every Garrison Partners location follows. That means background-checked, uniformed technicians on every call. It means a written price before any work begins, no exceptions. And it means the 365-Day Done Right Promise: if a covered repair fails within a full year, we return at no charge. Hendersonville homeowners hear a lot of promises from chimney companies. We put ours in writing.
Hank Delano leads our team, and he’s built a crew that treats a Hendersonville service call like a test of the guarantee. No no-shows. No price changes at the door. No mess left in the living room. We schedule Hendersonville work daily, so a repair call near Old Shackle Island Road gets the same discipline as one on the lake side.
Chimney Cap Replacement in Hendersonville
Chimney Repair in Hendersonville frequently starts with a chimney cap replacement, and for good reason: the original caps on many of this area’s 1980s and 1990s factory-built fireplaces rust through long before the homeowner notices. Once water gets past a failed cap, it works into the flue liner, the firebox, and eventually the framing around the chase. A new cap in Hendersonville typically runs $275 – $650, and it’s the single best dollar you can spend to stop a chimney problem from spreading.
When a Cap Has Failed
You’ll see rust streaks down the chase, water in the firebox after a hard rain, or a cap that’s visibly pitted or listing. Squirrels and birds working their way into the flue are another tell. Most Hendersonville calls we run for smoky fireplaces or damp chimneys start with a cap that stopped doing its job years ago. We replace it and the draft clears.
What We Install
We stock caps for factory-built systems and masonry chimneys alike, including Copperfield and Famco units. The replacement is sized to your flue, not just whatever’s on the shelf. A proper cap keeps water, animals, and debris out while letting the draft pull correctly. The job usually takes under an hour once we’re on the roof.
Chimney Liner Installation in Hendersonville
Chimney liner installation in Hendersonville is the repair we recommend when a clay tile flue has spalled or cracked from years of thermal cycling, or when a factory-built flue liner shows damage on camera. This is not a cosmetic fix; a compromised liner can let heat and carbon monoxide reach the wood framing of your home. A new stainless liner here typically runs $1,800 – $2,800, installed as a complete system with insulation and a correctly sized connector.
Why Old Liners Fail
Clay tile liners in Hendersonville’s older homes have been heating and cooling for three or four decades. The tiles crack, the joints open, and over time sections fall into the flue. Factory-built fireplaces have their own liner systems, and when those corrode or separate, the draft goes weak and smoke rolls back into the room. We see both failure modes regularly in subdivisions around Indian Lake and Saundersville Road.
DuraFlex Liners We Install
We install DuraFlex stainless steel liners, which carry a written warranty and handle the temperatures a wood-burning fireplace produces. The liner is pulled through the existing chimney and connected properly, not shoved in half-measures. After installation, we run the full camera inspection again so you can see the finished result on the report before we leave. That report is yours to keep.
Trusted Brands We Service in Hendersonville
We don’t install whatever’s cheapest. We specify material by the job, not by the margin. On Hendersonville repair calls, that usually means a DuraFlex liner for a reline, a Copperfield or Famco cap for weather protection, and HeatShield or Gelco products where a masonry firebox or smoke chamber needs resurfacing. We keep common Hendersonville parts in our local technician inventory, so a cap replacement or liner job doesn’t sit waiting on a shipment. When we quote a brand, it’s because that brand is the right tool for your chimney, and we’ll tell you exactly why.
Common Chimney Repair Problems We See in Hendersonville Homes
- Rusted original caps. Factory-built fireplaces from the 1980s and 1990s often still have the cap the builder installed. By year twenty or thirty, it’s rusted through, and water has been getting into the flue for years.
- Spalled clay tile flue liners. Homes built before the widespread use of factory-built units often have clay tile liners that crack under decades of thermal cycling. The cracks let heat and carbon monoxide reach the wood framing.
- Undersized or rough smoke chambers. Builder-grade fireplaces in Hendersonville’s older subdivisions frequently have smoke chambers that were never parged smoothly. The result is a weak draft and faster first-degree creosote buildup.
- Failed flashing at the roofline. Hendersonville sees real weather – hard rains, ice, and wind off Old Hickory Lake. When chimney flashing separates from the roofline, water tracks down into the chase or the ceiling below.
Pricing for Chimney Repair in Hendersonville, TN
Here are the numbers we actually quote in Hendersonville, so you don’t have to call just to learn the ballpark. A chimney cap replacement runs $275 – $650. A full chimney liner installation runs $1,800 – $2,800. Flashing repair runs $350 – $900. Mortar repointing and tuckpointing run $45 – $85 per square foot. Smokebox parging with HeatShield typically runs $900 – $1,800. The price you’re quoted is written down before any work starts, and it’s the number on the invoice. Call (830) 251-4560 and you’ll get a free estimate based on a camera inspection, not a guess.
We Also Serve Cities Near Hendersonville
Flint Chimney Sweep handles chimney repair across the Hendersonville area, including Chimney Repair in Hendersonville and nearby Goodlettsville, Mount Juliet, Gallatin, and White House. If you’re just over the line and need a proper inspection, we’ll schedule you the same as a Hendersonville call: written price first, camera report included, and the full guarantee in writing.
Serving Hendersonville, TN - Our Local Coverage Area
We’re based in the Hendersonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Hendersonville
Once a year is the standard, even if you only burn a few fires a season, because creosote buildup and animal nesting happen regardless of how often you use the fireplace. A Level 1 inspection plus sweep in Hendersonville typically runs $189 – $350, and it tells you whether the cap, liner, and flashing are still doing their jobs. If you burn less than a cord a year, every other year may be defensible, but know that a failed cap can be letting water into the flue the entire time. Call (830) 251-4560 and we’ll give you an honest read on whether your chimney can wait.
Third-degree or glazed creosote forms as a hard, shiny, tar-like layer, and a standard brush won’t remove it. It forms faster in Hendersonville’s factory-built fireplaces when the smoke chamber is rough or undersized, which cools the smoke too quickly. If our camera inspection shows glazed creosote, we’ll tell you plainly and recommend the right removal method rather than pretending a standard sweep fixed it. You’ll see the before and after on the photo report, so there’s no guessing.
Yes. Factory-built fireplaces are the majority of what we repair in Hendersonville, and they take liners and caps differently than masonry chimneys. We install DuraFlex liners sized specifically to factory-built flue dimensions and stock Copperfield and Famco caps designed for those chase tops. The job doesn’t require opening the chase unless the framing itself has water damage. We’ll tell you which is which once the camera goes up.
Every repair starts with the inspection we’ve been describing: a camera run through the flue, a photo report of exactly what’s damaged, and a written price for the repair. That price is set before any work begins, and it’s the number on the invoice when we finish. No add-ons, no surprise line items. If you approve the repair, we do the work that day or schedule it for the next available slot in Hendersonville, depending on the scope.
Sometimes, yes. A small mortar crack in a chase that stays dry can usually wait. A failed cap letting water into the flue cannot, because water damage compounds through the wet months and the freeze-thaw cycle makes it worse. The honest answer depends on what the camera shows, and we’ll give you that answer plainly. Some homeowners we tell, “This can wait,” and we mean it. Others, we show photos of the water tracking and tell them exactly why another month will cost them more. The 365-Day Done Right Promise applies either way: if the covered repair fails within a year, we return at no charge.
Hendersonville deserves a chimney company that documents what it finds, prices the repair in writing, and stands behind the work for a full year. We’re that company. If your chimney has been drafting poorly, leaking, or worrying you, call (830) 251-4560. A live person answers, we’ll schedule your inspection, and you’ll get the honest answer on what needs doing and what doesn’t.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Hendersonville under the Garrison Standard.