Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterFast, Reliable Chimney Repair Across Kenmore
Chimney repair in Kenmore, WA typically runs $295 – $1,850 depending on what’s actually wrong, and most Chimney Repair - Kenmore jobs are completed in a single visit once we’ve put a camera down the flue and shown you the footage. Flint Chimney Sweep has been part of the Garrison Partners family since 2002, and we repair chimneys across Kenmore with a written price before any work starts, a one-year guarantee on every repair, and a free return visit if a covered repair fails within that period. Call (830) 251-4560 and you’ll get a live person, not a voicemail tree.
Why Flint Chimney Sweep Is Kenmore’s Preferred Chimney Repair Company
Kenmore homeowners have been burned by chimney outfits that no-show, move the price at the door, or leave a mess behind. That’s exactly what we’re built not to do. Every job gets a written price before a single tool comes off the truck, and that price is the price. Our techs arrive in uniform, background-checked, and inside the window we gave you. When you call, a live person answers. Twenty-four hours a day, seven days a week.
We know Kenmore’s housing stock. The split-levels and ramblers off 68th Ave NE and Simonds Road NE were mostly built between the 1950s and 1980s, and their chimneys show it. The Kenmore area sits low and damp along the Sammamish River, which means masonry chimneys here take on more moisture than you’d see up the hill in Bothell. That moisture works into mortar joints, freezes, thaws, and quietly loosens brick over years. We know what that looks like because we’ve repaired it here, repeatedly.
Chimney Repair Companies in Kenmore
Chimney Repair Companies in Kenmore handle everything from a cracked crown to a full flue relining, and the difference between a good one and a bad one usually comes down to whether they’ll show you proof before they quote. The job typically involves a Level 2 camera inspection, removal of damaged material, and repair or replacement of the failed component. Homeowners in the Arrowhead and Northlake neighborhoods should expect a crown repair in the $450 – $900 range, while a full flue relining with a stainless liner runs $2,200 – $4,500 depending on height and access.
Repairs We Handle Most in Kenmore
Mortar repointing and tuckpointing are the two most common masonry calls we get in Kenmore. Damp-and-dry cycling in the Sammamish River valley softens mortar faster than you’d expect, and a repointing job on a typical single-story Kenmore chimney runs $800 – $1,600. Flashing repair is the other big one: winter rain driven off Puget Sound finds every gap at the roofline, and a flashing replacement typically costs $600 – $1,200.
What the Job Actually Involves
We don’t quote blind. Before any repair is proposed, we run a camera down the flue, photograph everything, and hand you a written report with the images included. That’s your evidence. If the liner is sound and the smoke chamber is intact, we’ll tell you a sweep is all you need. If a repair can wait, we say so plainly and put that in the report too.
Chimney Masonry Repair in Kenmore
Chimney Masonry Repair in Kenmore covers the brick, stone, mortar, and crown that hold your flue system together, and it’s the repair category most affected by local weather. Kenmore sits in a low bowl where moisture settles, and older masonry chimneys here go through more wet-dry cycles in a single winter than chimneys in drier parts of King County. Spalling brick repair in Kenmore typically runs $600 – $1,400, while a full chimney rebuild above the roofline ranges $4,000 – $8,000 depending on height and access.
Spalling and Rebuilding
Spalling is the trade term for brick faces popping off from trapped moisture, and it’s common in Kenmore fireplaces that see rain down a cracked crown. Left alone, spalling brick exposes softer inner material and accelerates structural damage. A rebuild from the roofline up is a bigger job, but it’s also a permanent fix when the brick is too far gone for patchwork.
Waterproofing and Flashing
Chimney waterproofing in Kenmore is often the smartest dollar you can spend after a repoint. We use penetrating sealants designed for masonry, not surface films, and a standard waterproofing application runs $400 – $800. Pair that with new flashing at the roofline and you’ve addressed the two main ways water enters a Kenmore chimney.
Trusted Brands We Service in Kenmore
We work with the brands already inside most Kenmore chimneys, and we stock common parts locally so we’re not waiting on a shipment to finish your repair. HeatShield is our go-to for repairing damaged flue liners without a full tear-out, and we specify Gelco and Olympia Chimney products where the job calls for a specific cap or chase cover. If your chimney has a Famco fan or cap already, we service that too. The point is simple: we name the product on your written quote, and you can look it up before you approve a dollar.
Common Chimney Repair Problems We See in Kenmore Homes
- Cedar and fir debris packed into the flue. Most Kenmore homes sit under mature cedar and fir canopy. Needles and seed cones land directly on chimney caps, bridge across spark arrestors, and choke draft before creosote is ever a factor.
- Water intrusion through cracked crowns. Winter rain driven off Puget Sound finds hairline cracks in old concrete crowns, soaks into the top courses of brick, and freezes. That’s the start of spalling at the firebox and loosening of the flue liner seal.
- Softened mortar joints from damp-and-dry cycling. Older Kenmore masonry chimneys absorb river-valley moisture all winter and bake in summer sun. The result is crumbling mortar and a flue liner that can shift, leaving gaps only a camera catches.
- Flashing failure at the roofline. Split-levels and ramblers common in the Arrowhead and Uplake Terrace areas put chimneys in awkward roof intersections. Flashing pulls loose, water follows, and the damage shows up indoors as a musty smell around the firebox.
Pricing for Chimney Repair in Kenmore, WA
Here are honest ranges for Kenmore: a standard sweep runs $189 – $249, a Level 2 camera inspection $325 – $475 (waived if you book a repair), mortar repointing $800 – $1,600, crown repair $450 – $900, flashing replacement $600 – $1,200, waterproofing $400 – $800, and a full chimney rebuild $4,000 – $8,000. Flue relining with a stainless liner runs $2,200 – $4,500. What moves the number is access: two-story chimney rises and steep roof pitches in the hills above Lake Washington add ladder time and safety gear. Every job gets a written price before work begins, and that’s the number on the invoice. Call (830) 251-4560 for a free estimate.
We Also Serve Cities Near Kenmore
Our Chimney Repair team covers Kenmore and the surrounding communities, including Bothell, Mountlake Terrace, Lynnwood, and Woodinville. If you’re just outside Kenmore proper, call (830) 251-4560 and we’ll confirm coverage and get you scheduled.
Serving Kenmore, WA - Our Local Coverage Area
We’re based in the Kenmore area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Kenmore
Yes, and it’s because of debris, not just creosote. Kenmore’s cedar and fir canopy drops needles and seed cones into flues year-round, and a single fall season can pack a damper solid even if you only burn twice a year. Our Chimney Inspection in Kenmore catches blockages before smoke backs up into your living room. Call (830) 251-4560 to schedule one.
We run a camera down the flue, photograph every inch, and hand you a written report with the images included. Then we quote from what the camera actually shows, not what a salesperson guesses. You see the spalled brick, the cracked liner, or the failed flashing for yourself before you approve a dollar. Estimates are free.
Minor surface spalling and hairline crown cracks can usually wait a season if they’re photographed and documented. What can’t wait: a liner with visible gaps, flashing that’s actively leaking into the attic, or a flue packed with cedar debris. We’ll tell you plainly which category yours falls in, in writing, and we won’t push a repair you don’t need.
Fir and cedar burn fast and hot, so glazed creosote is less common here than in places where people burn oak and maple. The bigger issue in Kenmore is organic debris, not creosote. Our Chimney Repair in Kenmore standard process includes a full debris removal from the cap, flue, and smoke shelf before we assess creosote levels, so you’re not paying for a creosote treatment you didn’t need.
Yes. We work with HeatShield for liner repair, Gelco and Olympia Chimney for caps and chase covers, and Famco for fans and terminations. If the brand is already in your chimney and it’s a professional-grade product, we’ll service it and name it on your written quote. Call (830) 251-4560 to check your specific setup.
Call Flint Chimney Sweep for Kenmore Chimney Repair
If your chimney in Kenmore is drafting poorly, leaking, or showing cracked brick, call (830) 251-4560. You’ll get a live person, a straight answer, and a written price before any work starts. Every repair carries our 365-Day Done Right Promise, and if a covered repair fails within a year, we come back at no charge. That’s the Garrison Standard, and it applies to every chimney we touch in Kenmore.
Written by Hank Delano, Owner at Flint Chimney Sweep, serving Kenmore as part of the Garrison Partners family since 2002.