Chimney Repair in Kent - Inspected on Camera, Then Priced in Writing

Fast, Reliable Chimney Repair Across Kent

Chimney repair in Kent typically runs $340 – $2,800 depending on whether you’re dealing with a cracked crown, failed flashing, or a full rebuild. Most repairs we quote here take one to three days to complete, and every job starts with a written price before any work begins. Our crews know the split between Kent’s older masonry chimneys and the newer factory-built units on the plateau, which changes what actually needs fixing. That’s why we start every job with a Chimney Inspection - Kent before we price anything. Call (830) 251-4560 to schedule a repair visit, and you’ll get a flat quote in writing before you commit to anything.

Call (830) 251-4560

Why Flint Chimney Sweep Is Kent’s Preferred Chimney Repair Company

We’ve worked on enough Kent homes to know the difference between a chimney that needs a $400 flashing repair and one that needs a $2,200 crown rebuild. Homeowners off SE 240th St, in the East Hill neighborhoods, and down near the Green River Valley have called us after other companies quoted full rebuilds when a simple crown seal was all that was required. Our techs are background-checked and uniformed, and a live person answers the phone around the clock. We serve Kent as part of the Garrison Partners family of chimney companies, founded in 2002, and every repair we make carries a 365-Day Done Right Promise: if a covered repair fails within one year, we return at no charge.

The Chimney Repair work we do for Kent homeowners always starts with a Level 2 inspection. That’s the camera-down-the-flue check that tells us whether the real problem is at the crown, the flashing, the liner, or somewhere else entirely. Hank Delano, who leads our repair crews, insists on photo documentation before any tool comes off the truck. You see exactly what we see. The price you approve is the price on the invoice, no exceptions. That’s how Chimney Repair in Kent gets done right, and why homeowners here keep our number on the fridge.

We’re not the cheapest outfit you’ll find, and we don’t try to be. We’re the one that puts the scope, the price, and the guarantee in writing before we start. For a homeowner who’s been burned by a no-show or a price that changed at the door, that discipline matters more than a lowball estimate.

Chimney Flashing Repair in Kent

Chimney flashing repair is the most common repair we book in Kent, and it’s almost always tied to wind-driven rain off the Green River Valley pushing water past failed step or counter-flashing at the roofline. On Kent homes, flashing separates where the chimney meets the shingles, and once water gets behind it, you’ll see damp staining on the ceiling near the chase, peeling paint, or rust streaks down the brick. A proper flashing repair in Kent runs $340 – $800 for a typical single-flue chimney, depending on how much of the old metal has to be cut out and replaced. We use Copperfield and Olympia Chimney flashing materials because they hold up to the wet winters here better than cheap galvanized stock.

Step and Counter-Flashing Reset

Most flashing failures on Kent homes involve the two-layer system loosening or tearing at the corners. We reset step flashing into the mortar joints, then lay counter-flashing over it and seal the top edge. When the existing metal is too corroded to reuse, we cut and form new pieces on site.

Roof-Line Leak Diagnosis

The tricky part for Kent homeowners is that a flashing leak often looks like a roof leak. Water travels down the flue chase and shows up a few feet away from the actual gap. That’s why a camera inspection matters before repair. We don’t guess and reseal the wrong joint; we find the exact path the water takes and fix that.

Chimney Crown Repair in Kent

Chimney crown repair on Kent’s older masonry homes means rebuilding the concrete cap that sits on top of the chimney, and the cold, wet winters here have done real damage to a lot of them. A crown that’s cracked or spalling lets water straight down into the smoke chamber, where it can rot the damper, erode the mortar, and eventually break down the flue liner. A standard crown rebuild in Kent runs $850 – $1,900 depending on chimney size and how much overhang the new crown gets. We pour a proper overhanging crown with Copperfield materials, not just a skim coat of patching compound that will crack again in two winters.

Signs a Kent Crown Is Failing

You may see chunks of concrete on the roof or in the gutter, white mineral staining on the brick below the crown, or water pooling around the firebox after heavy rain. Any of those means the crown is letting water through. The repair is straightforward, but ignoring it turns a $900 job into a $3,000 rebuild.

When Patching Is Enough

For minor hairline cracking on a newer crown, a proper elastomeric seal application can extend the crown’s life for several more years. That job runs $300 – $500 in Kent. We’ll tell you plainly if patching is enough or if the crown is too far gone, and we’ll send photos so you can see the condition yourself before you decide.

Trusted Brands We Service in Kent

We stock and install parts from Copperfield, Olympia Chimney, and Famco because those are the names that hold up in Kent’s wet climate and on the older masonry chimneys that dominate the East Hill and valley neighborhoods. When a Kent homeowner needs a new cap, a replacement damper, or flashing material, we don’t special-order something from across the country; we pull from our own truck stock and get the job done in one visit. Hank Delano specs the material by the job, not by what’s easiest to get, so you know the part on your chimney is rated for the actual conditions your house faces. That means fewer callbacks and a repair that stays repaired.

Common Chimney Repair Problems We See in Kent Homes

• Cracked and spalling crowns on 1960s – 80s ramblers. Older Kent masonry chimneys near the Green River Valley have spent four decades absorbing rain, and the crown is usually the first thing to go. Homeowners often misread the interior damp as a roof leak when the real problem is up top.
• Failed flashing at the roofline. Wind-driven rain off the valley pushes water behind step flashing that has loosened or corroded over the years. By the time staining shows on the ceiling, the leak has usually been active for a while.
• Third-degree creosote glaze in wood stove flues. Heavily used stoves on Kent’s older homes build a tar-like glaze that a standard brush won’t remove. Homeowners schedule a sweep and are surprised to learn the liner needs chemical treatment or replacement instead.
• Factory-built flue and cap failures on newer plateau homes. The newer subdivisions up on the plateau mostly have prefab chimneys, and those fail at the cap, the liner joint, or the termination point. A standard masonry repair doesn’t address the actual problem, which is why a camera inspection matters first.

Pricing for Chimney Repair in Kent, WA

We Also Serve Cities Near Kent

Our Kent crews regularly run repair jobs in Renton, Auburn, Federal Way, and Maple Valley too. If you live just over the city line, we’ll still come out, run the inspection, and give you the same written flat price before any work begins. Same crew, same guarantee, no different pricing because of your zip code.

FAQs About Chimney Repair in Kent